Wireless Printing with Airport Extreme?

I have a iMac(OS-X 10.3.9) and an Airport Extreme (white model) I wish to hook up my Epson USB printer to the Airport Extreme and use the Airport as a wireless printer router. It says I can now print from any Mac on my network using OS 10.2.3 or later. However, I have a windows XP (boo! Hiss! long story) on my network also. Can I use the Airport Extreme to print from my Windows wireless machine too and how do you set it up?
iMac   Mac OS X (10.3.9)  

Hi Moosewood
I don't think the folk in this forum know too much about windows. I suggest you post in the
Windows Compatibility forum, and i hope you get a better response. If not try the Airport forum.
good luck.
regards roam

Similar Messages

  • How to print with a wireless printer with airport extreme

    how to print with a wireless printer with airport extreme

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • Wireless Printing with Airport Extreme just stopped

    Strangely, it is not working on one of my 3 computers only! Was working with all 3, today it would not print from my iMac with Intel 2.33 GHz.
    No problem recognizing the printer. When I print the printer comes on, the printer head moves normally but a blank page comes out.
    I have tried all the suggestions from Apple under the heading "Top Searches", subheading "Aiport Extreme/Express wireless printing" and I have also repaired disk permissions but nothing has changed.
    Why would wireless printing work in an older computer and not a newer one? I have all the latest updates in BOTH the iMac and my Power Book so I can't blame a Security Update etc.
    What now?
    iMac Intel 2.33 GHz   Mac OS X (10.4.10)   Power Book G4, HP PSC 2410 All-in-one
    iMac Intel 2.33 GHz   Mac OS X (10.4.10)   Power Book G4, HP PSC 2410 All-in-one

    The exact problem for me. I also have checked all me settings, they seem to be
    the way they should, but I can not get to print whatever.
    I hope someone tell us what to do to make the printer work in an Airport
    Extreme connection
    PowerBook G4   Mac OS X (10.4.6)   Airport Extreme Base Station and 2 Airport Express

  • Real wireless printing with airport extreme

    My D-link 615 router and Brother HL-3070CW work flwalessly for two years.
    I decided to get an AEBS when D-link gave up. I thought I will be able to connect my printer to the AEBS as easily as I did with the D-link.
    I have a sony desktop/windows 7. I cannot connect my printer via USB port. I need a way to wirelessly connect my printer to the AEBS.
    My problem is that the printer cannot detect the wireless network after I installed the station. I tried to reinstall the printer but it did not work.
    I really like the dvice, but I cannot keep it if I cannot connect the printer wirelessly to four computers. I do not have a wired netwrok.
    Is there any way or link or instruction that can help me solve this issue. I apprecite your input and let me know if I need to add any missing details.

    Anyone?

  • Wireless printing with airport extreme and uverse modem

    Hi,
    I'm trying to hook up an airport express so that my PC Windows 7 and Mac Mini mid 2011 can print to both of my laser printers.
    The dell is network attached and the oki is network attached as well as usb attached directly to the express.
    Both systems see the printers but when i send a print job from the MAC it just errors out.  If i send it from the pc like normal then it still works ok.
    I also can't see either printer from my iPad 2 running iOS 5.0.1
    Right now I'm running a UVerse 3800 router/modem and i have the airport express ethernet connected to one of the lan ports of the uverse router.
    All printer drivers are current as well as the MAC software.
    Help

    The dell is network attached and the oki is network attached as well as usb attached directly to the express.
    If both printers are Network-Ready, then there is no need to connect either to the AirPort Express Base Station (AX) by USB. Being Network-Ready, these printers have their own built-in print servers which should be controllable by their front-panel interface and/or via a web-based interface.
    I also can't see either printer from my iPad 2 running iOS 5.0.1
    Unless both printers are AirPrint-enabled, no iOS device will be able to print to them directly.

  • Can't print with Airport Extreme

    I am having trouble printing with Airport Extreme.
    My printer is connected to the AE but every time I try to print I get a printer offline message.
    I have tried in the past to print wirelessly but have given up.
    I just bought a new MacBook Pro so I thought I would give it another go.
    Thank you.

    Not very much to go on here but I'll give it a stab.
    Go to the Airport Utility program located in Applications/Utilities folder.
    Run this and select "manual setup" for your AE displayed on the left.
    Hit the Printers icon on the top. Your shared printer should be displayed here. If it's not, then ensure it's powered on, good usb connection etc.
    After this shows a usb printer connected then go to System Preferences>Print & Fax. You'll see printers you have setup before on the left. A green icon usually means they are available. If print doesn't work to the desired printer the best thing to do is remove the previous definitions by highlighting the printer and hitting the "-" icon.
    Now hit the "+" sign and define the shared printer. It should be listed in the resulting "add Printer" dialog. Highlight, change any naming info and click "add".
    Printer should now be available. I'm assuming a supported printer that have the device drivers loaded on your system.
    That's all I got.

  • Can I use powerline wireless adapters with airport extreme

    can I use power line wireless adapters with airport extreme?

    Can this work?
    Yes
    I read somewhere that powerline adapters are not compatible with Airport.
    That information is not correct.
    If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
    Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
    Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

  • Windows XP Home & Wireless printing with Airport

    I have a PC running Windows XP Home, a macBook connected wirelessly through an Airport Extreme and an HP Photosmart C3180 all-in-one printer. The printer is plugged (usb) into the airport extreme. The macBook prints wirelessly to the HP just fine. What I cannot get is the Windows PC to utilize the HP printer. The PC is a desk top and is not wireless. Am I trying to do something that is not possible? Does the HP printer need to be directly connected to the PC for it to work?

    Are you trying to print without an Airport (Extreme or Express) Base Station? You won't be able to print without the specific equipment.
    As far as trying to get the XP side of your MacBook to work, have you installed the latest Boot Camp available? The drivers for Boot Camp have been updated recently. Hope this helps!
    Hello iFelix;
    I desperatly need yor help.I just bought Macbook Mac
    OS 10.4 and I installed WIndows XP SP2,Every thing is
    working very fine except wireless network and
    bluetooth. Bluetooth is not issue but wireless
    yes.Network driver is working ok and Atheros Network
    wireless Adapter is working properly.I use Linksys as
    arouter. But somehow wireless network does not take
    the signals.When use Macintosh side, there is no
    problem and it is not asking any password, wireless
    working just fine.I dont know what to do. I hope this
    information would be helpful to solve the problem.PLS
    HELP ME. THANK YOU.
    Mac OS X (10.4.7)
    15 Al PowerBook G4   Mac OS X (10.4.7)  

  • Wireless printing with airport express/extreme?

    i'm trying to figure out how to use either an express or an extreme (I have both) as a wireless print network of sorts. In the past I hooked up my modem to the extreme along with my printers, and was able to connect wirelessly to my computer; thus, wireless printing. i have since changed to google fiber (including that just in case that's part of the issue), and my modem/router is on a different level of the house than the rest of my computer setup, and i don't think it can be moved. All the solutions i've found require a computer to be directly connected to the modem/express for the initial setup, which isn't possible in this case as i don't have a laptop, just a desktop. Any suggestions would be much appreciated!

    It helps if you use specifics.
    Are you talking about a USB printer?
    What is the google modem router??
    How and where do you hope to place the airport and printer? ie will it be plugged into the main router by ethernet?
    There is no problems doing the setup over wireless.. as long as wireless reaches the computer. There is also no problem manually setting up the airport router in total isolation from the network.. once  setup you can place it back into the network.
    Typical method of manual backup.
    Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

  • HP Deskjet F380 problem printing with airport extreme

    Have tried everything under the sun from the apple and HP support websites and cannot get my printer to work wirelessly. When I try to add my printer, I get error message "-9672". Any other suggestions. Already spent 90 minutes on HP support and they gave me "their best effort", meaning they didn't think they could really help with outside products. Thanks.

    Hello jds17. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations.
    Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
    o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also, you may find the following Apple article helpful.

  • HP printing with AirPort Extreme

    I have a imac with Intel, OSX 10.6.  I am using a HP Photosmart C7280 All-in-One printer, and have been for a few years and it has worked extremely well.  Earlier this year my old airport extreme went bad and I purchased the latest one.  It has the latest updates available.  When I got the new Airport Extreme the directions said to plug the printer via USB cable into the Airport.  I have been through the system preferences, deleted and added the printer, went through the manual set-up for the Airport Extreme, rebooted everything and it will NOT print.  The Airport Utilities recognizes the printer and it tries to print and stops giving me a message of "Printer Paused", or printer offline.  When I hit "resume", the printer cycles a bit and them goes to "Printer Paused" again.  Everything worked great until I purchased the new Airport Extreme.
    The printer works excellent when plugged into the back of my imac, however, it does not make my wife happy because she can't print from her laptop.  My Son brought a friend home with him for the weekend that is a Software Engineer.  He downloaded software and drivers and installed them and he could not get it to print with the USB cable plugged into the Airport either.  He worked with it for 4 hours.  The HP printer just will not communicate with the Airport.  I have also been getting a message this evening that one of my ink cartridges has expired.  I can shake it and it appears to be almost full.  I opened a new one and get the same message that it is expired.  I have had the new one for several months though because I hate running out of ink.
    Any help would be most appreciated.

    I am not exactly the sharpest tool in the shed when it comes to setting this stuff up.  I was hooking the printer up to the Airport Extreme because the set-up instructions said to.  When the software engineer was here, he could not get the wireless on the printer to find the Airport Extreme.  The kid is pretty sharp but was under a lot of pressure to get done so that he and my Son could get on the road.  He wasn't expecting to get into the hassles of setting this up.
    This is probably mostly because of the name I have given to the Extreme being too long and not remembering, or KNOWING anything about this.  I have given the Extreme one name and the network another.  I don't know where the set-up instructions are and he was trying to guess.  I just tried doing as you said to make the printer wireless but failed for the same reasons he did.  I got a message to go back and check the set-up.  I am not sure what I am supposed to check for.   I guess I will have to change some of the set-up information on the router as far as naming the router and network.
    When I got this pinter I did not have v.10.6 on the imac at the time.  However, when I downloaded the software from HP, it was for 10.6 and 10.7.   I just a few minutes ago got the printer to work with the USB cable plugged into the computer, actually a USB hub.  Just a few minutes after i got the printer working by hooking it to the USB hub, a software update popped up for a HP printer update.  For a bit of information, I have had problems with concentration since several war injuries in Viet Nam and I get lost easily.  I don't mean to use this as an excuse, just explaining that I will be a bit slow following you.  I was a Senior Radio Repairman and Communications Chief in the Army and head of the Crypto Center.  Now I feel like a lost ball in high weeds.  I can still work things out by reasoning to an extent, but sometimes it is very frustrating, so I ask that you bear with me.
    Ed

  • Slow wireless printing with Airport Express

    I have a Canon MP530 printer hooked up to an Airport Express for wireless printing. My wireless internet network is through an Airport Extreme. The only thing hooked into the Express is the printer, and it works but is extremely slow. It can take an hour to print one 15 page document. Any ideas how to fix this?

    I'm not sure I understand your question, or at least I don't know how to tell connection speed with the utility. The express is set up as an extension to my current wireless network, although I'm only using it for printing.
    I had a similar experience with a hard drive wirelessly connected to the Extreme - data transfer was ridiculously slow. Is this something to be expected with wireless connectivity?

  • Problem printing with Airport Extreme/Bonjour through Mozilla Firefox

    Hi.
    With the help of Apple's telephone tech support, I just set-up my new PowerBook G4 and Airport Extreme (including cable internet, desktop nonwireless PC, and HP LaserJet 3012).
    I can now print from the PowerBook and through MS Word on the desktop. The problem is I can't print email or web pages through Mozilla Firefox on the PC. Has anyone else had any problems with this? Is there a Mozilla update that would fix it? Unfortunately, Apple tech support said they can't help with it since it is printing through other applications, just not Mozilla Firefox. They suggested I try this discussion board.
    I haven't downloaded Mozilla Firefox on the PowerBook yet so I don't know if the Mozilla problem with replicate there too. I can print from Safari on the PowerBook right now.
    Any suggestions?
    Thanks!

    Same problem, kind of... Have an Imac G5 with HP Laserjet 1012 connected usb. The Imac is direct wired to a 2Wire DSL wireless access point.
    Setup bonjour on a (checks to make sure nobody is listening...) Toshiba Tecra L2 (Windows XP SP2). Prints fine from IE, refuses to print from firefox. Acts like it is printing, doesn't go. Prints fine from Word.
    Setup bonjour on my wife's (covers mouth, looks embarrassed and coughs) dell d610 (windows xp sp2). Prints fine from ie and firefox. same network, same basic software.
    Apple's bonjour site said something about an ie bonjour plugin, but that wouldn't explain why my wife's dell prints from firefox.
    Anyone know if there is a firefox bonjour plug? haven't been able to find one. any suggestions on what settings would account for the differences. checked the firewall and exceptions in laptops.
    Imac G5   Mac OS X (10.4.6)  

  • Printing with Airport Extreme using PC

    I have an airport extreme network with an Macbook and two windows PC's connected to it wirelessly. I can access the internet with all three, but can only print wireless with the Macbook. I've installed Bon Jour on both the PC's but they still will not print. The printer is an HP L7680 if that means anything. The two PC's are an HP and a Dell, one running XP and the other running Visa. When I contacted Apple Support they said it was printer problem and I would have to contact HP. HP tells me it's a Microsoft Driver issue and to contact Microsoft. Microsoft won't respond with an answer and I have no idea where to look for a driver that I would need to download to get the PC's to print wireless.
    Any solutions would be greatly appreciated.

    I've had a similar problem and no thanks to apple tech support found a solution using hints from various apple discussions
    here is my system
    hypersonic desktop xp pro ethernet to airport extreme
    dell xps laptop vista wireless to airport extreme
    xerox phaser 6110mfp usb to airport extreme
    both hypersonic and dell had internet access
    hypersonic could print
    dell would print once then would have problem
    here is my fix
    uninstall avg antivirus
    uninstall bonjour
    uninstall xerox programs
    drop vista firewall
    clean registry
    go to control panel/programs/and or remove windows components
    remove any printer services then reboot
    go back to control panel/programs/and or remove windows components
    add all printer services then reboot
    download bonjour setup
    go to control panel/programs/run under compatibility mode
    execute compatibility routine to run bonjour install as administrator
    execute compatibility routine to run xerox driver install as administrator
    go to control panel/printer to delete printer
    execute compatibility routine to run bonjour wizard as administrator
    close firewall
    reinstall avg anti-virus
    everything tested well, no problems so far

  • Printing With Airport Extreme - Results thru PCs Better than thru Macs

    I don't get it. My Airport Extreme works beautifully when printing from the Windows XP desktop connected thru it by a LAN or from the Windows Vista laptop connected wirelessly.
    However, when I try to print from either my my MacBook Pro or Mac Mini (both wireless connections), I get poor results - only partial letters and images.
    Other Airport functionality works great on all machines. For example, I can save to an external hard drive equally well using any of the machines mentioned above. Printing is the only problem.
    Any idea what's going on?

    We have the same problem. We print from Windows XP, two G4s and a G5 with no problem utilizing all the printers features. The MacBook Pro cannot print a job which has been in queue. One at a time, ok. And, it will not support duplex mode. All the other computers use the old printer driver, the Pro uses a OS X generic driver. It resists any attempt to install the old driver. Among other things, it makes me crazy to have the latest Mac incapable while the PowerPC machines and Windows (sigh...) hum right along.
    So I agree, I think it is a driver problem.

Maybe you are looking for

  • ITunes is possessed!?!?!?

    All of a sudden my iTunes is possessed, I open the app to select a song to play and it goes haywire! In the selection screen it scrolls up & down on its own, in the play screen it scrolls back and forth then eventually surprises me with a song of its

  • [SOLVED] Samsung ML-2010R on print server: downgrade CUPS to 1.4.7

    On Mac OSX I have version 1.4.7 and my USB laser printer connected to the router print server works fine. On Arch I have version 1.5.3, same configuration, but the printer doesn't work. I downgraded CUPS to 1.4.7-4 version but now there's a problem w

  • Bookmarks in "horizontal swipe" articles?

    Is it possible for a user to bookmark a particular page in an article if the folio is set to "horizontal swipe only"?  If I bookmark a vertical article arrangment, it goes to the first page.  Is this the same in horizontal arrangements?  Apologies fo

  • RecipientThreadLimitExceeded in message tracking logs, queuing and holding up local email delivery to office365

    Please let me know if anyone knows an answer to this one... We're in a Hybrid Exchange environment, with 2 x Exchange 2007 servers,  and 1 x Exchange 2013 Hybrid server which is pointing to Office 365 for the purposes of relaying mail to O365 while w

  • Can't get samba to start

    Arch 3.6.6-1 Samba 3.6.9-1 using systemd The following fails with no output. sudo systemctl start smbd.service nmbd.service systemctl status smbd.service: smbd.service - Samba SMB/CIFS server Loaded: loaded (/usr/lib/systemd/system/smbd.service; disa