Wireless Problems. 2 PC's connected via Netgear, would like to connect G5

Thanks for your time in looking at this message.
I have currently set-up three PC's via a Wireless Netgear Router. (DG834G). Two of these computers are wired to the Router, and the other runs wirelessly. The Netgear network name is 'Errington'.
I also have a Apple G5, running OS X 10.3.3. I have purchased an Apple Extreme Card aswell as an Airport Base Station and installed correctly. I would like to connect this computer to my Netgear network in order to share the internet connection as well as printers.
Although I can use Apple's, I'm a PC person so have difficulty in setting up hardware. The following, I'm not to sure if it is correct...
I have created a new network for the Apple base station, under the name of Natasha. I have a signal bar - however no connection. My main problem is that I cannot locate the Netgear Network, 'Errington' and as a result I have not internet on this machine.
Again, if anyone has any suggest these would be greatly appreciated.
With kind regards
Anthony
G5 Mac OS X (10.3.3)
G5 Mac OS X (10.3.3)
G5 Mac OS X (10.3.3)

If you are running an open network, with no MAC address access control, no WEP or WPA security then authentication shouldn't be an issue.
It does sound more like a security issue than anything else.
You could try resetting the wireless settings and re-configuring from scratch with a new network name.
The other option is to connect the Airport Extreme to the Netgear and ensure the AEBS is configured to NOT distribute IP addresses.
iFelix

Similar Messages

I created a wireless network with my Time Capsule but would like to connect this network to a WiFi Hotspot for Internet Access

I have created a Wirelss Network at home with the Time Capsule and would like to connect this network to the Internet.
I can't use LAN Cable to connect to it anything becasuse I usually use the WiFi that runs through my building.
Can I connect the Time Capsule to the WiFi hotspot somehow so that all computers on my network have Internet access and if so, what do I need?
I need this done because the computers can only be connected to either the WiFi network or to my Time Capsule Network at any given time.
Or is there a way to be connected to both networks simultaneously?
I have two PC's and two Macs.
Thank you for any support and I apologise for my ignorance. I am not too good with networking.
I have tried the silliest of things like connecting a router to the TC only to then realise that the TC had an inbuilt router.
I tried connecting a USB WiFI adapter to the USB Port on the TC but it doesnt detect it that way apparently.
Please help!

I have a kinda same problem @ https://discussions.apple.com/thread/3531642
Please reply (somebody)!
JeremyZ

I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible?

I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible? If so, where can I buy such a rooter? Many thanks! Ina

I'm not really understanding what you want. You mention all 3 types of connections: wireless, 3G and bluetooth, but I'm not clear on what you want to do. What the router is supposed to do, and why do you think it would need to connect via bluetooth?
I'm thinking you want to buy a Mifi type device that will allow you to connect to a cellular network and then connect the iPad to that device via the Wifi network the Mifi produces.
Is that so?

I have a TC which is connected wirelessly to my router. I would like to connect a mac in another location via ethernet to the TC. I can't seem to get it to connect. Am I missing something?

I have a virgin Superhub which serves my wireless needs throughout the house. I have a Timecapsule which connects wirelessly to the router with no issues. I can backup my MBP over wireless easily. I have now got another machine in a different part of the house that I would like to connect to the network. It doesn't have wireless so ethernet is the only option. I have a number of options 1) run cabling - not really possible 2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet.
I like option 3 because
(a) - I don't have to spend any more money and
(b) - my wife wont complain about cables also see (a)
Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks

Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks
No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I'm having trouble with back to my MAC. I had everything working on my home wifi network but now I am at my daughter's house and trying to connect via a verizon hotspot wifi connection. I'm wondering if the Verizon hookup is a problem.

I finally figured it out. Needed to update her Airport firmware and allow guest access, and also changed Sharing preferences to Allow Access for All Users.

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

HT4279 I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
Everymac.com says:
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100.

ATV2 - Can I connect via HDMI to TV and connect to outdoor speakers also?

Currently have an airport express on my mac and i just bought Apple TV (2nd Generation). Essentially I would like to connect ATV2 via HDMI to my TV to play movies, see photos, and play music but I would also like to connect ATV2 (perhaps via optical output?) to a receiver or other speaker system to play music outside on my deck.
Is this possible? I was told at the Apple store prior to purchasing that it is possible. Has anyone here accomplished this? Both connect to TV and also to another audio component??

The answer to your question is yes.
I currently have the HDMI running through my receiver to my TV for movies and music in the Home Theater, and the optical output (going thruogh an optical to analog converter) to the Multi-Room input on the receiver. This provides music to three other sets of speakers in the house.
The Multi room input on my Marantz receiver only supports an analog input but with the converter everything works great.

I would like to connect the electric violin to ipad4 as electric Guitar.

I would like to connect the electric violin to ipad4 as electric guitar. What should I do? I have Flanger FC-20, it's doesn't work.

Some external devices can be connected via Apple's camera connection kit.
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception. If that is the case then I am happy as a Pig in Mud
I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
Many Thanks
Nick

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.

I would like to connect an external hard drive to my time machine and use it as a network drive to store itunes and iPhoto how do i do this

I have just purchased a new my book hard drive and would like to connect it to my time capsule and store my itunes and iphoto contentent there to free up space on my internal hard drive . Can this be done and what is the process?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed. How can I upgrade my OS to 10.6 or better?

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
10.9 Mavericks is pure 64 bit and is a free download from the App store.
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.

I have a macbook 13" late 2009 and would like to connect my TV to macbook to view video with sound. What cable do I need to mack work?

I have a macbook 13" late 2009 operating system OS10.9.2.
I would like to connect my macbook to my TV . I have connected a mini DVI / HDMI cable to my tv which works for the picture but have no sound.
How do I get the sound to work?
Thanks

When you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

Wireless Problems. 2 PC's connected via Netgear, would like to connect G5

Similar Messages

Maybe you are looking for