Wireless radio is not functionin​g - Photosmart c4599 All-in-one

 I have had my printer connected to my home wireless network.  The printer stopped working.  When I run the wireless network test report it says "The wireless radio is not functioning.  Contact HP Support.  According to the HP web site, the printer is out of warranty.  Is there anything I can do to get the wireless working again via a hard reset or is this something a technician will need to fix?  If out of warranty, is the cost to fix really worth it?

If this message is appearing on the Front Panel of the printer, then it is an indication of a hardware problem that has developed.
It sounds like the wireless card has gone bad in the printer and this is not something that a reset would be able to address.
If the printer is out of warranty, then your best option is to replace the printer. HP Tech Support has many options available to you, such as the Upgrade program.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • Wireless Radio is not functionin​g on Photosmart C309a

    VERY FRUSTRATED right now....I've read similar posts about this and wonder if there is a significant flaw with the wireless radio in this model that HP will not acknowledge....
    I've got a 13 month-old (Still shiny new) Photosmart C309a that is just past the warranty date.  It really hasn't been used much at all -- just basic household use.  I am totally kicking myself since we started having problems with the wireless network disconnecting about 3-4 months ago (when it was still under warranty).  It was a sporadic issue, and I was always able to do a reconnect by doing a combination of unplugging it and then using the "Wireless Setup Wizard" to reconnect.  Now it cannot find the wireless network at all.  The Wireless Radio is "on" and when I run the Wireless Network Test I now get "The Wireless Radio is not Functioning.  Contact HP Support".  My wireless network seems to be working just fine for everything else, so I truly think this is a printer problem. 
    Anyhow, because it is just past warranty, we have called HP support twice and have not gotten much help either time.  They do not seem to care and tell you they will have to charge you for the help?!? 
    Am I supposed to replace a perfectly good printer since the wireless doesn't seem to connect?   Is there another way to fix this?  Is there a way to just replace the wireless radio and not the whole printer (and is that advisable)?
    I would greatly appreciate any help!

    This seems to be an issue with HP wireless printers. The Photosmart C309a is my second all in one in 5 years. Same as many others, my wireless went dead 13 months after purchase with very light home use. Last one had wireless go dead same way and had to use it wired to the network for 4 years.(except for wireless, old printer still works fine, had to upgrade for Windows 7)
    Seems HP should correct this issue or at least quit advertising wireless printers when the wireless dies and cannot be fixed.
    No one should have to purchase a new all in one printer to have wireless when everything works except the wireless after the first year. The printers cost way too much for cheap wireless with a short lifespan. If HP does not do a recall on these printers for the wireless, I'm going to purchase a different name brand next time... Starting to look up reviews now on other printers.

  • HP Photosmart c309a printer. install msg is 'wireless radio is not functionin​g'. troublesho​ot?

    My HP Photosmart C309a printer stopped printing.  i uninstalled & re-installed the printer and software.  on the reinstall, a message popped up that "wireless radio is not functioning'" how do i troubleshoot this?

    This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
    Do it soon.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Photosmart printer B110a wireless radio is not functionin​g

    Has worked on wireless for 14 months with no problems.  Now I cannot get the printer to work - have printed a wireless network test report and it states that the wireless radio is not functioning. I have unplugged the power cable to the printer and waited 30 seconds before reconnecting but there is no change - any suggestions?

    I have sent a private message with some steps to try.
    Let me know what happens.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • The wireless radio is not functionin​g

    The wireless radio is not functioning on my HP Photosmart C309a (Vista 32-bit) - Contact HP support on Wireless Network Test Report
    This question was solved.
    View Solution.

    The UK number should be 0844 369 0369.
    If my answer was helpful, please click the "Kudos" star.
    If your problem is solved, please click the "Accept as Solution" button.
    Note: Although I am an HP employee, I am speaking for myself and not for HP

  • Help, report says wireless radio is not functionin​g contact HP suport***

    Help, report says wireless radio is not functioning contact HP suport***
    wireless on        pass
    wireless working   FAIL
    This question was solved.
    View Solution.

    Reset your C7280 by turning it off, hold the # and 6 keys while and a bit after turning it on.
    Now, run a Wireless Network Test from the front panel.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Wireless radio is not functionin​g

    I keep getting the message wireless radio not functioning on a C309a.  I have tried all the suggestions that are posted.. Is there any other way to fix wireless radio.  I was on the phone with HP for 3.5 hours tiring to resolve the issue and nothing was resolved.. My printer is just out of warranty.   Is there anything else that can be done or is the printer used wirelessly junk? I am able to connect thru USB for now.. but really need my wireless to work.  Can anyone help Please!!

    jcarol19 wrote:
    Mine too!  I also have a C309A printer and have spent over 2 hours on line with HP trying to fix the problem and for a moment it was fixed.  But then the next day, it wouldn't work again so I ran a wireless test and it said the wireless radio is not working.  This would mean that the radio installed in these printers are junk and need to be replaced.  I would suggest you fight "city hall" by sending your complaint to upper managment.  The last thing they want is bad publicity, trust me I know.
    Don't waste your time, I tried it....they could care less about bad publicity....all I got out of it was a headache from the phone conversations and now having my posts deleted.  They insist this is not a recurring problem and have gone so far as to say that wireless radio failures are RARE!!!!!!!

  • "The Wireless Radio Is Not Functionin​g" - LaserJet 200 M251nw

    I have had this LaserJet printer for a couple of weeks now and recently it started giving me a number of different errors. It was displaying the 79 Error  and i was attempting to figure out why it won't connect to any network when it started hanging up entirely when trying to find networks. i printed out the test report and it says that "The wireless radio is not functioning. Contact HP support."Is this something that can be fixed easily?

    Please reset the printer back to factory defaults.
    1. From the Home screen on the product control panel, touch the Setup button.
    2. Scroll to and touch the Service menu.
    3. Scroll to and touch the Restore Defaults button, and then touch the OK button.
    The product automatically restarts.
    Now check again to see if the wireless radio is non functional.   If yes then I suspect the wireless radio has failed.  However there is a possible fix, go here:
    Connect wireless printer anywhere, convert from wired, bypass failed radio, add WPA2 security.
    http://h30434.www3.hp.com/t5/Printer-Networking-an​d-Wireless/Connect-your-wireless-printer-when-away​...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • C309a The wireless radio is not functionin​g.

    My c309a is out of warranty.  Network test report states wireless radio not functioning.  It is out of warranty but only 2 years old. Is there a part that can be purchased to correct px.  Saw other user who was still under warranty was told to contact HP to utilize the warranty rights.  So I guess this is something that cannot be fixed without replacing part.

    Right.  Your printer's wireless radio has likely failed.  Installing a new one, even if you could get the part, would be more expensive than getting a new printer.  Sorry.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can I get the wireless hardware fixed on my HP photosmart C7250 all in one printer?

    I did the test by holding down the # 6 and it said that the wireless hardware needed service.  Any advice on where to get it serviced?  Thank you! 

    Hi,
    Please use the following link (under "Manage Print Apps" to cancel/remove it:
      http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp​...
    You may also get this:
    My Print Apps
    To view and manage print apps for your printer, use the display on the printer itself. This website cannot manage print apps for your printer. In this case, you have to cancel from your printer.
    Please also try this (if the above mothod did not help):
      http://h10025.www1.hp.com/ewfrf/wc/clc?tmp_showAll​=false&destPage=document&cc=us&dlc=en&docname=c031​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Photosmart C4599 All-In-One

    My HP will begin to print, but will only print out the top couple of inches of a document. I have Windows 7  Someone told me that I need to have my settings changed on the printer.  If that is true, I do not know how to do that.  I hope that somebody does!  Very frustrating!

    If this message is appearing on the Front Panel of the printer, then it is an indication of a hardware problem that has developed.
    It sounds like the wireless card has gone bad in the printer and this is not something that a reset would be able to address.
    If the printer is out of warranty, then your best option is to replace the printer. HP Tech Support has many options available to you, such as the Upgrade program.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

    My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
    Wireless on                    PASS
    Wireless working         FAIL
    and everything following that stated as 'not run'.
    Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
    So the question is, is this a hardware fault, and if so what can be done about it?

    Hello,
    Yes, it is an hardware issue and indicates that the Wireless card is not functional.
    Please call HP Tech Support for further assistance.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the white star under my name.
    Click "Accept as Solution" if it solved your problem, so others can find it.
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

    HP Photosmart Prem C410a All-in-One
    Windows 7 64-bit
    Wireless Radio is not working
    Trying to change from USB to wireless setup
    purchased at Staples on 8/19/2010 - means warrenty has expired

    With the printer ON, unplug power from the back of the printer for 30 seconds.  Does that reset the radio?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My wireless radio is not functioning on my hp photosmart c7280

    My newtowrk is up and running. I recently had to erase hard drive and reload. My hp photosmart all-in-one C7280 wireless radio is not functioning.
    My operation system is Windows Vista Home Premium 64 bit. Hp Desktop Pavilion c6700y.
    Is the radio really dead?
    This question was solved.
    View Solution.

    Reset the printer.  Turn it off, then hold the # and 6 keys while and a few seconds after turning it back on.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

    I have an HP Photosmart C7250 All-in-one and the wireless feature does not work.  When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning.  Contact HP Support".  Can you help me?

    Let's reset the printer.  Turn it off, hold the # and 6 keys while turning it back on.  Go to Setup > Network > Wireless Network Test afterward to see if it worked.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • Passing multi-value parameter to a transaction iView

    Hi all, Here is my problem, I try to feed a selection-option (multi value) from the "DynamicParameter" section of the url. For example I use this URL, to feed the select-options with A, B and C: http://XXX:51000/irj/portal/test?DynamicParameter=S_opt

  • Every music album is stored in folder "unknown" in...

    Hello everybody, I have the following problem with storing music in my Nokia E65. First I transfer music albums from my Windows Media Player 10.0 into the Nokia Music Manager. Everything is shown correctly in the Nokia Music Manager: Titles, Interpre

  • Itunessetup.exe not valid with Win 32 application

    Trying to install Itunes and it says C:\Documentsandsettings\Joe\temporaryinternetfiles\Conten.IES\ZMC5K011\iTunesSe tup.exe is not a valid WIN 32 Application. Need help

  • Grey out the Time field in date assignment block

    Hi All,     In my project we need to create a date profile in which i need a date rule to get today date and the time should be greyed out. i tried all day event but not working out for Zdate type.  I tried different date types but Time field is not

  • Backup drive - external hard drive

    i've owned a lacie 500gig firewire external hard drive for a while now but have only really just started using it. i seem to have problems when using files on the drive - when i want to open them it tries to import them onto my macbook hard disk. so