Wireless range extender or signal booster for Mac OS 10.9 ?

Hi, I have a new iMac 21.5 in, running OS 10.9.5. I have tons of storage capacity, 8 GB memory, and its very fast.
I have two questions:
1.the little one is, why does this message pop up sometimes on this site:
" ! You are not allowed to create or update this content." ? When that happens, I see no explanation to help me fix the problem!
2. The bigger question I have is:
can anyone suggest a device I can purchase that would strengthen my land's wireless signal so i have decent internet?
I am renting one of 13 cottages on a small parcel of land, and mine is the last in a string of renters all sharing the same wireless signal! So I get the last dregs after everyone else's gaming, streaming, etc etc.
It would need to have a working driver for Mac OS 10.9 available for it, as I am currently running 10.9.5, and would like to continue upgrading the OS software whenever it comes available.
I know hardly anything about how all that internet config stuff works, and I don't even know exactly what i should be looking for— extender? booster? adapter? etc….
But I need something soon, as right now my hands are tied, and I can only do anything at all on my old windows PC!
Thanks for any advice!!

Extending a bad signal will give you a bad signal.
If the cottages share electrical power you could try powerline adaptors. Otherwise run cables.

Similar Messages

  • Express or Extreme better wireless range extender?

    I own the latest Airport Extreme as my base station.  I also own a prior, 5th generation Extreme 802.11n, and a prior generation Airport Express 802.11n (the one that plugs directly into the wall).  Two questions:
    -- Which of these two would be a more effective wireless range extender for my base station? 
    -- Would there be any disadvantage (eg diluting the signal) to using them both, in different locations in my house? 
    Thanks.

    -- Which of these two would be a more effective wireless range extender for my base station?
    The AirPort Extreme has a better antenna arrangement, so it would normally work better.
    -- Would there be any disadvantage (eg diluting the signal) to using them both, in different locations in my house?
    The network slows down a bit with each wireless device, but the effect of having greater wireless coverage will probably disguise that.
    Most users would rather have better wireless range, even if they must give up a bit of speed.

  • WUMC710 could play as wireless range extender & Bridge role at same time?

    If using bridge WUMC710, could it play the role as a wireless range extender for my wireless devices and at same time also as bridge to connect wired devices such as internet ready TV with router?

    Hi,
    The WUMC710 is only designed as a wireless bridge. There's no option to set it up as a repeater - bridge. Even DD-WRT don't have it on their compatible hardware list - only WAP54G. You might be interested on this DD-WRT Wiki article: Linking Routers: Repeater Bridge.
    Check this table for comparison with current Linksys wireless bridges:
    - Article ID 26631: WUMC710, WES610N and WET610N product comparison
    If everyone needs to believe in something, I believe I'll have another beer..

  • Porblem with WGXB102 (wireless range extender) and imac

    Everytime my imac sleeps it can't access the internet using the WGXB102, however I can switch directly to the router with my old setup and the internet works. The only way I get the extender to work is to reset the main netgear router. How can I get the extender to work after the computer goes to sleep?

    Yes there are some issues with the Wireless Range Extender version 3.0 ...related to IP Conflict ... but they can be resolved by upgrading the firmware of the Range Extender .....
    You can use Range Extedner version 2.0 & 3.0 ....

  • External  signal booster for Airport extreme card

    I'm trying to find a solution to boosting the signal receiving capabilities of my Apple 15" Powerbook G4 with an Airport Extreme Card.
    I live in an area that receives several WiFi non-encrypted signals, which my Airport can detect (weakly), but I need to boost the signal that the airport receives.
    Let me make this clear, I am not attached, or connected to ANY router, or DSL system, I am only receiving open WiFi signals.
    I need to find a signal booster, or directional antenna. (I’d rather not crack open the Power Book to attach the hardware).
    I’ve looked at several 3rd party options i.e. Linksys, Netgear, Hawkings, D-link, most do not support Mac ( so often)
    I currently use a Hawking Tech directional PCI wireless card 802.11 B/G mixed mode. It works well enough with Mac, but it is often buggy, and yes I do turn of Airport when I use it. But I’d rather use the built in Airport with an external booster. I’m open to suggestions, Mac or 3rd Party, though the ‘Pringles can’ doesn’t work. thanks
    Powerbook G4 Mac OS X (10.3.9)
    Powerbook G4   Mac OS X (10.3.9)  

    Hi mkupman:
    Welcome to Apple Discussions!
    Here may be a few options for you! http://www.quickertek.com/

  • Belkin Wireless Range Extender (F5D7132)?

    I've just bought a Belkin Wireless G Universal Range Extender (model: F5D7132) and am trying to get it to extend the range of our D-Link wireless network.
    According to Belkin's installation guide, I simply need to place the unit next to my current wireless modem/router, hold down an 'Auto Connect Button' for 10 seconds, and the Belkin unit will then automatically extend the range of the D-Link.
    Sadly, this hasn't happened, and Belkin's help pages are of zero use.
    Does anybody have this unit? If so, are you able to point me in the correct direction to connect the unit to wirelessly extend my D-Link unit?

    Hello, thanks BDAcqua, it is encouraging to hear from you. I will try to clarify the problem I am having. It is fairly simple to describe: Whenever I place my laptop within range of our Access Point(repeater), my Internet connection fails, server fails, etc., everything fails concerning Internet access, even though my Airport is showing full reception of the wireless signal. The wireless signal is coming through loud and clear, I am just unable to use it for anything whatsoever. Only if I remove my laptop from the range of the AP and place myself close to the 'main' wireless router am I able to go online(wirelessly). I can go online with Airport successfully anywhere I get reception except with the new AP we have set up here. The new AP at present works fine only with Windows OS.
    I tried what you suggest in your reply and entered the two DNS server numbers, but no change yet.
    I can still just get online if I stay very close to our primary router's signal. Any idea what I could try next? I did connect to Apple at router, but not at the AP.
    Does this define the problem I'm having more clearly?
    Thanks, jb

  • Signal booster for cell service

    Seeing if anyone has any suggestions on this one.  We have iphones.  We WERE on ATT, which has horrible service where we are.  So we purcahsed a Micro Cell tower when we had ATT numbers.  But then we decided to go to another service, except this service still USES the ATT towers. The Micro Cell ONLY works with ATT phone numbers. 
    So now that we have different numbers, the Micro Cell is no longer any good. 
    Does anyone have any suggestions what brand SIGNAL BOOSTER we could get that would be good for ANY SERVICE, not just ATT??
    Thanks

        Thank you so much for trying that out claymeijer,
    This is definitely an odd one! Let's deep dive in to this and make sure we cover all bases. Please ensure that you've added your numbers to the contact list via My Verizon. Here are the steps: http://vz.to/196jt5g
    Also, please ensure your router has  current firmware. This can be checked by visiting your routers website.
    If issues persist, we would want to connect you to our Network Extender department.
    Thanks!
    MelissaM_VZW
    Please follow us on Twitter @VZWSupport

  • Signal booster for iPhone / AT&T domestic service

    I have an iPhone 3G but live in a small town in NH, where AT&T wireless signals are poor. Does anyone know about any sort of signal booster either for the iPhone itself or which can be set up in my house to better pick up an AT&T wireless signal? Thanks.

    ATT has announced a microcell booster. You'll have to contact your local ATT office for pricing and availability.

  • Signal Booster for iPhone4

    Can anyone recommend a signal booster to enhance my Verizon iPhone4 phone and data signal in "fringe" areas?
    When camping in some areas of the Adirondacks in NY, I can only get one bar on my iPhone.  Internet is extremely slow if at all.  Can someone recommend a signal booster device (either with an antenna I can mount on a travel trailer or a free-standing enhancer) that can attach to my iPhone to boost its reception?  Thanks.

    dougunruh, Welcome to the discussion area!
    Another square 802.11b/g/n AirPort Extreme base station (AEBS) can extend the wireless network using 802.11n.
    You could use a round 802.11b/g AEBS or AX to extend the network but it will be using WDS and 802.11g. Also using WDS will cut the wireless bandwidth to half (27 Mbps).

  • What is a compatible signal booster for the ipad?

    There are a number of signal boosters for cell phones.  A few of them advertise that they work with aircards.  Does anyone know if there are signal boosters compatible with the ipad or what specifications I need to research?  It would be good to be able to access verizon when I'm traveling if I need a boost in signal.
    Thanks for your input.
    Alan

    There isn't one, and there won't be one. Apple and Adobe could never get a flash player that worked. And now since Adobe has ceased all production on mobile flash, there won't ever be one.
    Your best alternative is to explore the app store for browsers that support flash and see if one of them will do what you want.

  • Wireless range extender

    I am connecting wirelessly using a range extender and am finding media streaming a problem. When I connect direct to the router everything is fine, but media is slow and buffers going through the range extender. I can't find a problem, tried various different channels but no joy. My download speed is the same though the extender too.

    shahedny wrote:
    I was having some issues with my range so I got a range extender(Wireless N Router). I got a wired line from verizon router and connect new router. Everything is perfect. However maximum connection I can get is 24 MBPS, my line is 50 and I do get them when I connect with wired line. Just wondering if anything I could do so I can get more then 25 MBPS using wireless. New device is N so it can do more I know. 
    Should I upgrade verizon Fios router?
    Make the security wpa2 aes and set the connection to be wireles-n only

  • Wireless usb adapter EW-7711UAn, drivers for Mac OSX 10.9 (Mavericks)

    Hi,
    I have recently got a wifi usb adapter (above indicated) as my airport card is not working anymore and I needed a quick cheap option... After hours and hours trying to make the new device work, it seems the problem is the version of the drivers (there´s not drivers for Mac OSX 10.9) or that´s what I think. Does anyone know something about it? In the meantime I am waiting for an answer from MediaTek (the owner)... I´ll let you know if as soon as I get a reply what happens
    cheers!

    this adapter is using the chip RT2870 of Ralink. You can download its driver for OSX 10.9 frome Ralink website.
    http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=502

  • Range Extender Unable to Setup on Mac...No Update for OSX 10.10.2

    Just bought this extended brand new but it's worthless as your software for setup won't run on my Mac running OSX 10.10.2.
    What are we supposed to do???
    Please advise before I return!
    Thanks!!

    Do you have one of the latest Linksys range extenders? Not sure if you've gone through the same steps, but the following link shows how to set it up through MacOSX wirelessly: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d018a91cc2cd425ba837bf2be5ad9fb9_Setting_up_your_L...
    For the previous models, this link will be helpful: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=206954591ff54e36884bb4636fcfd3d9_Manually_configur...

  • Time Capsule Wireless Range Extended with AirPort Express

    I recently was able to (finally) get my Time Capsule working with my previous 2WIRE modem/router (DSL through ATT). This took hours, but it was worth it! Time Capsule is now my primary router with it "bridged" with the 2WIRE device which is now only a modem. Back up is working fine with our three Apple laptops. However, the wireless signal is weaker than when it was set up with the 2WIRE alone. Our signal strength upstairs was weak making internet connection VERY slow and frustrating. I got an AirPort Express to see if I could use it to boost/extend the wireless signal from the Time Capsule unit. Set up was simple, and it is working great! I have it plugged into a wall outlet between the Time Capsule and the stairs leading upstairs. The wireless signal is now "full" everywhere in the house!

    Wired Ethernet from the TC to the AirPort Extreme will result in much better performance.  It sounds as if you are not configuring the AirPort Extreme correctly.
    Please try the following steps carefully:
    Unplug the Ethernet cable from the AirPort Exteme if it is not already unplugged. With the AirPort Extreme powered on, hold in the reset button on the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart
    Connect the Ethernet cable to the WAN "O" port on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
    The example below displays an AirPort Express. You will see AirPort Extreme.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Exterme and click Next
    Wait a minute while AirPort Setup configures everything for you. When you see the message of Setup Complete, click Done.
    That's it.  Pretty simple.  Things should be working fine now.

  • Best signal booster for airport express

    Need to boost the signal in my house for better coverage. I have a model A1264 Airport express.
    What is the best and easiest way to increase signal coverage without having to to move the location of the airport.
    Thanks,
    JJ

    Add another AirPort Express and configure the setup to "extend a wireless network". Keep in mind that you will need to locate the new "remote" AirPort Express where it can receive a strong signal from the "main" Express.
    Apple's instructions for this setup are here:
    http://support.apple.com/kb/HT4259
    The example pictures two AirPort Extreme devices, but the set up for two AirPort Express devices is exactly the same.

Maybe you are looking for

  • Cannot Receive Calls and Text Every Morning! Pls Help!!

    Hi all, I am new here. I registered cus i am facing irritating problem with the phone. I dunno if anyone else is facing the same problem. I cannot receive any calls or sms everyday morning. My friends told me that it went directly to the voicemail. H

  • Vertex

    Hi, We are using SAP 4.6 C currently. We are upgradingto ECC 6.0. Assuming the requirements remain the same what work is required in the new ECC 6.0 system to interface it with vertex? I mean what config. steps would we need to consider and are there

  • Error when installing jam pack/audio content on new imac

    Keep trying to install the audio/jam pack cd´s that came with my Logic Studio bundle on my new Imac/Leopard. When i´m almost done installing, it asks for the "logic" cd and then after a while i´m getting an error "installation failed"- disk corrupted

  • Question about upgrading CS3

    We have Adobe Creative Suite 3 and want to know if there is a way to update it so we can open and edit files from newer versions of Creative Suite, specifically InDesign and Photoshop.  We keep getting missing plug in errors and such.

  • Sync "smart playlist" without song-titles?

    Is it possible to synchronize only a smart playlist without all the song-titles what are included? A example; In i Tunes i have a very large song library on my mac. Then i have synchronized some titles, with "Check Selection" mode. Now i have a "Smar