Wireless regulatory domain set to GB, even tho BO have been selected

Hello,
for some reason something is setting my wireless regulatory domain to GB right after wicd associates my adapter with my access point. I have selected the correct domain in /etc/conf.d/wireless-regdom (everything but my domain has been commented out, I have installed crda) and added wireless-regdom to my DAEMONS line. Does anybody have an idea what is changing it to GB?
Here's a paste of dmesg showing the problem
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Dec 22 09:11:48 CET 2011
[ 0.000000] Command line: root=/dev/disk/by-label/archroot ro 5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfde0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfde0000 - 00000000dfee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee1000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EX58-UD5/EX58-UD5, BIOS F13q 11/12/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 1A0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfde0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5c40] f5c40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfde0000
[ 0.000000] 0000000000 - 00dfc00000 page 2M
[ 0.000000] 00dfc00000 - 00dfde0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfde0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001a0000000
[ 0.000000] 0100000000 - 01a0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1a0000000 @ dfdd8000-dfde0000
[ 0.000000] RAMDISK: 37d89000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7600 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee1180 04A7B (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee5dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee5e40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000dfee5e80 00470 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000dfee62f0 00AF2 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000dfee5c40 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfee6e00 00CCC (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001a0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001a0000000
[ 0.000000] NODE_DATA [000000019fffb000 - 000000019fffffff]
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199600000-ffff88019f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001a0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfde0
[ 0.000000] 0: 0x00100000 -> 0x001a0000
[ 0.000000] On node 0 totalpages: 1572207
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896544 pages, LIFO batch:31
[ 0.000000] Normal zone: 10240 pages used for memmap
[ 0.000000] Normal zone: 645120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfde0000 - 00000000dfee0000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000
[ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80448 r8192 d21952 u131072
[ 0.000000] pcpu-alloc: s80448 r8192 d21952 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1545578
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-label/archroot ro 5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6108484k/6815744k available (4158k kernel code, 526916k absent, 180344k reserved, 5286k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 50331648 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 3499.966 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7002.59 BogoMIPS (lpj=11666553)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000071] Security Framework initialized
[ 0.000074] AppArmor: AppArmor disabled by boot time parameter
[ 0.000507] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001636] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002093] Mount-cache hash table entries: 256
[ 0.002338] Initializing cgroup subsys cpuacct
[ 0.002357] Initializing cgroup subsys memory
[ 0.002367] Initializing cgroup subsys devices
[ 0.002368] Initializing cgroup subsys freezer
[ 0.002370] Initializing cgroup subsys net_cls
[ 0.002371] Initializing cgroup subsys blkio
[ 0.002400] CPU: Physical Processor ID: 0
[ 0.002401] CPU: Processor Core ID: 0
[ 0.002404] mce: CPU supports 9 MCE banks
[ 0.002411] CPU0: Thermal monitoring enabled (TM1)
[ 0.002416] using mwait in idle threads.
[ 0.003061] ACPI: Core revision 20110623
[ 0.004974] ftrace: allocating 16320 entries in 65 pages
[ 0.008188] Switched APIC routing to physical flat.
[ 0.008491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041430] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.146057] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.146061] ... version: 3
[ 0.146061] ... bit width: 48
[ 0.146062] ... generic registers: 4
[ 0.146063] ... value mask: 0000ffffffffffff
[ 0.146064] ... max period: 000000007fffffff
[ 0.146065] ... fixed-purpose events: 3
[ 0.146065] ... event mask: 000000070000000f
[ 0.166297] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.192636] Booting Node 0, Processors #1
[ 0.192638] smpboot cpu 1: start_ip = 9a000
[ 0.305842] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.325715] #2
[ 0.325716] smpboot cpu 2: start_ip = 9a000
[ 0.438934] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.458778] #3
[ 0.458779] smpboot cpu 3: start_ip = 9a000
[ 0.571996] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.578530] Brought up 4 CPUs
[ 0.578532] Total of 4 processors activated (28010.90 BogoMIPS).
[ 0.580114] devtmpfs: initialized
[ 0.580803] PM: Registering ACPI NVS region at dfee0000 (4096 bytes)
[ 0.581343] print_constraints: dummy:
[ 0.581392] NET: Registered protocol family 16
[ 0.581455] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.581457] ACPI: bus type pci registered
[ 0.581541] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.581543] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.586719] PCI: Using configuration type 1 for base access
[ 0.587041] bio: create slab <bio-0> at 0
[ 0.587110] ACPI: Added _OSI(Module Device)
[ 0.587111] ACPI: Added _OSI(Processor Device)
[ 0.587112] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.587113] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.587538] ACPI: EC: Look up EC in DSDT
[ 0.589316] ACPI Warning: Incorrect checksum in table [TAMG] - 0x50, should be 0x4F (20110623/tbutils-314)
[ 0.589643] ACPI: Interpreter enabled
[ 0.589645] ACPI: (supports S0 S3 S4 S5)
[ 0.589654] ACPI: Using IOAPIC for interrupt routing
[ 0.591717] ACPI: No dock devices found.
[ 0.591718] HEST: Table not found.
[ 0.591720] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.591751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.591811] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.591812] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.591814] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.591815] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.591816] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.591826] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[ 0.591861] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.591864] pci 0000:00:00.0: PME# disabled
[ 0.591882] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 0.591914] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.591916] pci 0000:00:03.0: PME# disabled
[ 0.591935] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
[ 0.591977] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
[ 0.592017] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800
[ 0.592059] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800
[ 0.592099] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
[ 0.592107] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff]
[ 0.592137] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.592139] pci 0000:00:13.0: PME# disabled
[ 0.592150] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 0.592193] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 0.592236] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 0.592279] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800
[ 0.592321] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.592355] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.592389] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.592423] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.592456] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.592490] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.592531] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.592548] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.592607] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.592610] pci 0000:00:1a.7: PME# disabled
[ 0.592628] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.592639] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.592682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.592684] pci 0000:00:1b.0: PME# disabled
[ 0.592699] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.592742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.592744] pci 0000:00:1c.0: PME# disabled
[ 0.592761] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
[ 0.592803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.592806] pci 0000:00:1c.1: PME# disabled
[ 0.592826] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.592860] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.592893] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.592927] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.592961] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.592994] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.593035] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.593052] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[ 0.593111] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.593114] pci 0000:00:1d.7: PME# disabled
[ 0.593128] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.593171] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.593239] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.593241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.593270] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.593282] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
[ 0.593287] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
[ 0.593293] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
[ 0.593299] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
[ 0.593305] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf50f]
[ 0.593310] pci 0000:00:1f.2: reg 24: [io 0xf400-0xf40f]
[ 0.593338] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.593350] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.593366] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.593390] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.593401] pci 0000:00:1f.5: reg 10: [io 0xf200-0xf207]
[ 0.593407] pci 0000:00:1f.5: reg 14: [io 0xf100-0xf103]
[ 0.593413] pci 0000:00:1f.5: reg 18: [io 0xf000-0xf007]
[ 0.593419] pci 0000:00:1f.5: reg 1c: [io 0xef00-0xef03]
[ 0.593424] pci 0000:00:1f.5: reg 20: [io 0xee00-0xee0f]
[ 0.593430] pci 0000:00:1f.5: reg 24: [io 0xed00-0xed0f]
[ 0.593487] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
[ 0.593494] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.593502] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.593510] pci 0000:01:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.593516] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.593521] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.593549] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.593551] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.593553] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.593557] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.593587] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.593638] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 0.593715] pci 0000:03:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
[ 0.593752] pci 0000:03:00.0: PME# supported from D3hot
[ 0.593756] pci 0000:03:00.0: PME# disabled
[ 0.593780] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.593801] pci 0000:03:00.1: reg 10: [io 0xbf00-0xbf07]
[ 0.593813] pci 0000:03:00.1: reg 14: [io 0xbe00-0xbe03]
[ 0.593824] pci 0000:03:00.1: reg 18: [io 0xbd00-0xbd07]
[ 0.593836] pci 0000:03:00.1: reg 1c: [io 0xbc00-0xbc03]
[ 0.593847] pci 0000:03:00.1: reg 20: [io 0xbb00-0xbb0f]
[ 0.593916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.593918] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.593921] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.593948] pci 0000:04:01.0: [1102:0004] type 0 class 0x000401
[ 0.593962] pci 0000:04:01.0: reg 10: [io 0xcf00-0xcf1f]
[ 0.594015] pci 0000:04:01.0: supports D1 D2
[ 0.594027] pci 0000:04:01.1: [1102:7003] type 0 class 0x000980
[ 0.594040] pci 0000:04:01.1: reg 10: [io 0xce00-0xce07]
[ 0.594093] pci 0000:04:01.1: supports D1 D2
[ 0.594105] pci 0000:04:01.2: [1102:4001] type 0 class 0x000c00
[ 0.594119] pci 0000:04:01.2: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 0.594127] pci 0000:04:01.2: reg 14: [mem 0xfbef8000-0xfbefbfff]
[ 0.594177] pci 0000:04:01.2: supports D1 D2
[ 0.594178] pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.594181] pci 0000:04:01.2: PME# disabled
[ 0.594221] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.594224] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.594226] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.594230] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.594232] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.594233] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.594235] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.594236] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.594250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.594335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.594351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.594375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.594421] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.594423] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.594424] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.601329] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.601355] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.601380] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.601406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.601431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.601456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.601481] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.601506] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.601562] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.601565] vgaarb: loaded
[ 0.601565] vgaarb: bridge control possible 0000:01:00.0
[ 0.601611] PCI: Using ACPI for IRQ routing
[ 0.602749] PCI: Discovered peer bus 3f
[ 0.602767] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600
[ 0.602779] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600
[ 0.602792] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600
[ 0.602803] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600
[ 0.602815] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600
[ 0.602826] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600
[ 0.602837] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600
[ 0.602848] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600
[ 0.602860] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600
[ 0.602871] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600
[ 0.602882] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600
[ 0.602894] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600
[ 0.602904] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600
[ 0.602915] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600
[ 0.602926] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600
[ 0.602938] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600
[ 0.602950] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600
[ 0.602961] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600
[ 0.602972] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600
[ 0.603233] PCI: pci_cache_line_size set to 64 bytes
[ 0.603319] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.603320] reserve RAM buffer: 00000000dfde0000 - 00000000dfffffff
[ 0.603384] NetLabel: Initializing
[ 0.603385] NetLabel: domain hash size = 128
[ 0.603386] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.603393] NetLabel: unlabeled traffic allowed by default
[ 0.603400] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.603403] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.603406] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.618592] Switching to clocksource hpet
[ 0.621786] Switched to NOHz mode on CPU #0
[ 0.621823] pnp: PnP ACPI init
[ 0.621829] ACPI: bus type pnp registered
[ 0.621868] pnp 00:00: [bus 00-3f]
[ 0.621869] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.621870] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.621873] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.621874] Switched to NOHz mode on CPU #1
[ 0.621875] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.621877] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.621878] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.621894] Switched to NOHz mode on CPU #3
[ 0.621900] Switched to NOHz mode on CPU #2
[ 0.621902] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.621940] pnp 00:01: [io 0x0010-0x001f]
[ 0.621941] pnp 00:01: [io 0x0022-0x003f]
[ 0.621942] pnp 00:01: [io 0x0044-0x005f]
[ 0.621943] pnp 00:01: [io 0x0062-0x0063]
[ 0.621944] pnp 00:01: [io 0x0065-0x006f]
[ 0.621945] pnp 00:01: [io 0x0074-0x007f]
[ 0.621946] pnp 00:01: [io 0x0091-0x0093]
[ 0.621947] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.621948] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.621949] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.621950] pnp 00:01: [io 0x0290-0x029f]
[ 0.621951] pnp 00:01: [io 0x0800-0x087f]
[ 0.621952] pnp 00:01: [io 0x0290-0x0294]
[ 0.621957] pnp 00:01: [io 0x0880-0x088f]
[ 0.621996] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.621998] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.621999] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.622001] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.622002] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.622004] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.622010] pnp 00:02: [dma 4]
[ 0.622011] pnp 00:02: [io 0x0000-0x000f]
[ 0.622012] pnp 00:02: [io 0x0080-0x0090]
[ 0.622013] pnp 00:02: [io 0x0094-0x009f]
[ 0.622014] pnp 00:02: [io 0x00c0-0x00df]
[ 0.622029] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.622054] pnp 00:03: [irq 0 disabled]
[ 0.622059] pnp 00:03: [irq 8]
[ 0.622060] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.622078] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.622092] pnp 00:04: [io 0x0070-0x0073]
[ 0.622108] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.622112] pnp 00:05: [io 0x0061]
[ 0.622127] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.622132] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.622135] pnp 00:06: [irq 13]
[ 0.622152] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.622220] pnp 00:07: [io 0x0400-0x04cf]
[ 0.622221] pnp 00:07: [io 0x04d2-0x04ff]
[ 0.622254] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 0.622255] system 00:07: [io 0x04d2-0x04ff] has been reserved
[ 0.622257] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.622352] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
[ 0.622390] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.622392] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.622472] pnp 00:09: [mem 0x000d3000-0x000d3fff]
[ 0.622473] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[ 0.622474] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 0.622476] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 0.622477] pnp 00:09: [mem 0xdfee0000-0xdfeeffff]
[ 0.622478] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.622479] pnp 00:09: [mem 0x00100000-0xdfedffff]
[ 0.622480] pnp 00:09: [mem 0xdfef0000-0xdfefffff]

After doing some troubleshooting I have discovered that the GB regdom is set when I connect to my wireless accesspoint with wicd. Wicd uses wpa_supplicant, I have set COUNTRY=BO in wpa_supplicant.conf, but it didnt help. If I dont connect I get to use my wireless adapter with the BO regulatory settings. Its a big mystery, especially considering the fact that I'm not in the GB, havent been there with this computer and I didnt find any config files where this locale was set either. Does anybody have an idea?
Last edited by wims (2012-01-12 05:40:41)

Similar Messages

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

Why won't my tabs & windows reopen as they should, even tho I have it set for them to do so?

Why won't my tabs & windows reopen as they should, even tho I have it set for them to do so?
"Firefox can be configured to restore all windows and tabs that were open when the application is closed or terminated unexpectedly. This article describes the circumstances under which your session is restored and how you can configure it."
I have it set up, in "Tools", "Options", etc., for my windows and tabs to reopen & be restored to the webpages that they were previously at before I, for one reason or another, restarted my computer! But, after I restart my computer and the Firefox browser, it always goes to my homepage; the windows & tabs NEVER restart as they should!
It wasn't always like this. It has only been within the last few weeks that this has become a constant and consistent problem. I assume that a Firefox update somehow disabled something & that's why it isn't working properly but, whatever...
How do I fix this so that my windows & tabs reopen as they should!?

Have you checked to make sure that under>> Options >> General >> That the startup behavior is appropriately? I had the same problem after upgrading and setting my homepage. It should be set to "show my windows and tabs from last time".
Just re-read your post. sounds like you've tried this already.

I purchased a song on my Ipod Touch 4 GEN. and i listened to it not 5 mins before i synced it with Itunes...then i looked in my Ipod music library and itunes library...GONE. but when i go to download, it wanted me to pay even tho i have bot it! HELP!!!

i purchased a song on my Ipod Touch 4 GEN. and i listened to it not 5 mins before i synced it with Itunes...then i looked in my Ipod music library and itunes library...GONE. but when i go to download it, like with Apps when if you have purchased an app and it get's deleted...you can have it back for FREE
and i tryed that with this song...and it says that " you have already purchased this song, would you like to buy it again?" but it wont let me get it again for free even tho i have bought it before...is there a way i can get it back with out having to pay??
HHHHHEEEELLLLPPPP!!!! PPPLLLEEEAAASSSEEE!!!!!!

You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes

My iMac keeps telling me no room on hard drive even tho i have cleaned hard drive

my iMac keeps telling me no room on hard drive even tho i have cleaned the
hard drive and still have 5 gig left, thanks

Carloyn Samit wrote: Never allow the free disk space to fall below 15% of the capacity.
This is an urban legend. First, since disk capacity varies greatly, giving this kind of percentage figure is completely worthless.
There are many variables involved in determining the amount of space to leave free: among them, the needs of the particular OS installed, installed RAM, typical need for VM, applications typically used, and anticipated need for free space overall, such as knowing one will be adding space hogging movies or other files. Much depends on the user's habits.
For one user, leaving 20-30GB free might be needed, for another 10GB or even less might suffice.
But it would be plain silly to suggest that one leave 15% of a 500GB or a 1 or 2GB drive. (75GB,150GB, 300GB respectively?) This kind of percentage suggestion was perhaps somewhat useful when drives were much, much smaller.)

Running out of disk space error even tho I have 200GB free!!

Dear users,
I have a huge problem. I have dowloaded an application from the AppStore named "Virtual City" and once I try to play the game it crashes saying "Running out of disk space" even tho I have more than 200GB free on my hard disk.
I am using a MacBook Pro Mid April 2010 with Lion latest version.
What could be the problem??
Thanks in advance.
A.

Did you try to reset your phone by holding the sleep and home button until the Apple logo comes back again?
Do you have an "other" section on your phone, bigger than 1GB? If yes, try to restore the phone to bring it back to normal size, it might contain corrupt data from an unsuccessful sync.

My iPod touch 4g keep saying my charger isn't supported even tho I have used this one for years and has never said it befor

My iPod touch 4g keep saying my charger isn't supported even tho I have used this one for years and has never said it befor

- Does it charge when connect to your computer?
- Does it charge other devices?
- Does your iPod charge when connect to your computer?
- Try another cable
- See:
iPod touch: Hardware troubleshooting

HT1222 I cant update my ipad even tho i have adequate storage space available i get a message that i need 2.9 gb and have 14 gb available

I cant update my ipad even tho i have adequate storage space available i get a message that i need 2.9 gb and have 14 gb available

Is the 14G on the iPad or iCloud?

I have an iPhone 5s and in my iTunes music library have the songs checked that I want downloaded onto my phone. Instead of doing this, it is syncing all songs whether they are checked or not even tho I have the "sync only checked songs" box checked.

I have an iPhone 5s and in my iTunes music library have the songs checked that I want downloaded onto my phone. Instead of doing this, it is syncing all songs whether they are checked or not even tho I have the "sync only checked songs" box checked. So basically it's syncing all of the songs when I just want the checked ones on. This is very frustrating.

When your device is connected, check the tabs at the top ("Summary" "Apps" "Music," etc. Under the Music one, check to see if "Sync Music>entire music library" is checked. If it is, that may be why all the songs are syncing.

Can you still get a iCloud even tho you have already use all of the free times?

I need to know how to get a iCloud even tho you have use all of your free turns

Maybe this previous discussion.
https://discussions.apple.com/message/19867885#19867885

Why does my music player on my iPhone 4 always revert back to the same song when in shuffle mode even tho I have played multiple songs since that first song was played.very frustrated

Why does my music player on my iPhone 4 always revert back to the same song when in shuffle mode even tho I have played multiple songs since that first song was played.very frustrated

SHuffle does not play songs in a truly random fashion. Like all computer related random generators the sequence is pseudo-random

I'm trying to set up my apple tv and have been asked for my AppleID and password. Then I'm asked for a password for my password???!!! What do I do?

I'm trying to set up my apple tv and have been asked for my apple id then my password. Then I am asked for the password for my password. What is this?

It's when I am in home share set up. I give my apple ID and password as asked, then I am prompted to provide a password for my password.
Sorry it's taken me so long to get back to you. had to go out for a few hours.

I have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?

i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
where is the data stored when i moves messages to the imported pst?
after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?

I am not sure what you mean by this.
is it ok to delete outlook ID's copy/backup as running out of space?
If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
Are you updated to the latest version of Office?
After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
This may help:
http://www.officeformachelp.com/outlook/troubleshoot/

Printer not present when trying to connect even though drivers have been installed

printer not present when trying to connect even though drivers have been installed

Hi Marc,
If you are having issues with printing from your iMac I would suggest that you troubleshoot using the steps in this article -
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
Specifically -
Troubleshooting steps you can use if there is an issue
Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
Use Software Update for the latest available updates.
Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
If the issue persists, try these additional steps:
Reset the printing system (see below). Then, add the printer again.
If the issue persists, reset the printing system again. Download and install your printer's drivers from here. Then, add the printer again.
If the issue still persists, contact the printer vendor or visit their website for further assistance.
Thanks for using Apple Support Communities.
Best,
Brett L

Users stills appear to have transactions assigned even though roles have been removed.

Hi,
I'm currently looking at a number of users with access to sensitive transactions (e.g. SCC4).
When looking at a combination of the AGR_ROLES and AGR_TCODES tables I can see there is currently only one active role and one active user assigned this access which would fall in line with what was to be expected based on the population I am looking at (we're not concentrating on auth object level for now).
However when I go through SUIM and filter on users by complex criteria and enter transaction code SCC4, about 20-30 users pop up (this is how many people used to be assigned access to SCC4).
When access was removed for these 20-30 users, it was done at 'role level' so my question is, even if roles have been removed, when looking through SUIM would a user still appear to have transactions associated with that role assigned - if so, why does this happen? I assumed once a role is removed it would removed the underlying transactions etc with it?
My assumption at the moment is that even though SUIM is showing users still have access to SCC4 they can't actually use it as the role it was associated with has been removed.
Any help/clarity on this would be greatly appreciated.

Hi Johnny,
Please do perform the User comparison.
Goto PFCG -> Role Name -> user comparision
then check in SUIM still user is having that Tcode or not .
for detail
Go to SUIM
Roles by complex selection criteria -> put Tcode there
it will give you Roles name having that tcode . and then you go to that Role and you will get list of Users in PFCG (User assignment Tab) .
same goes with User
SUIM - Users by complex selection criteria - > put tcode -> Profiles associated with - > roles assosiated with it .
But i suggest after you make any changes to Role / Profile you please do user comparision .
Regards
Dishant Pathak

Wireless regulatory domain set to GB, even tho BO have been selected

Similar Messages

Maybe you are looking for