Wireless remote control and FM transmitter in one?

Hello.
Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
Other ideas or a combination of products to accomplish this much appreciated!
thanks
iPod 80 GB Windows XP

I spent some time (2 hrs) again with the vendor, trying to solve the issue.
The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
It is quite a surprise that I couldn't find any information on the use (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
Thank you

Similar Messages

Remote control and MSI PC-DTV Mega Sky 580

Hello,
I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
Microsoft XP SP2 with current updates.
2x300GB
1GB ram
Intel D820
Onboard graphics and sound
Dust and dog hair arranged attractively around the box!

Hi,
Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
They all work fine but I would prefer a complete set
I

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

You can't, you will need to get a new remote.

Unable to allow remote control and deny transfer files in RM

Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

Originally Posted by spond
Newellt,
I can't see why it would be necessary, I suggest you open a Service
Request and complain!
Shaun Pond
Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

Qosmio X300 - Remote control and function bar for windows seven

Hi,
I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
Help me plz.
Thanks for reading
(Sry for my bad English)

Hi
The Win 7 drivers are not available for this unit at this time.
But I found some Win 7 drivers on the Toshiba US driver page.
Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
There is no big difference between X300 and X305 so the Win 7 drivers should work too

N8 as remote control and life remote viewer for wi...

I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
Is there any software for N8 Belle ?

You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose.

Need help with my Toshiba remote control and receiver for Qosmio G30 161

Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony Worlock

Hi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets

BT Vision black remote control and Bush LC-39GL12F...

I have a BT Vision+ box with a black BT Vision remote control.
I have a Bush LC-39GL12F TV
I'm trying to control the abovementioned TV with the abovementioned remote.
I have tried following both the instructions in the BT Vision User Guide which came supplied with the box, and the information on the following webpage:
http://bt.custhelp.com/app/answers/detail/a_id/13573
The latter instructs me to obtain a 4-digit code from the following page:
http://www.bt.com/help/codes
For the "Bush" make of TV, 55 different codes are listed.
The instructions say "If there's more than one code listed for your TV, you'll have to use trial and error until you get the right code."
55 trials and 55 errors later it emerges that not a single one of these codes appears to work.
Note the the blue light on the remote flashes 3 times after every single one of these codes are entered, but none of them work.
Does anyone have a code that does actually work, or am I missing something obvious?

If you have purchased This Tv Bush LC39GL12F from Argos, there is not a code available and Argos do not forsee a code being available in the near future. I was advised to call Argos Customer service on 0845 6403030 to log a complaint as to no code and eventually a code maybe made available. NO Good Ringing Argos Tech support, Ring 0845 6403030 Argos Customer Service.

Questions about remote control and infrared port Qosmio F20

Hi again,
My Toshiba Qosmio F20 comes with a remote control funcioning through a infrared device on the front of the computer.
Regarding this I have 2 questions:
1. How do I configure additonal functionality through the remote control? (Like launching and controlling Winamp?)
2. How do I connect other devices, like my cellular phone, pdas etc., to the infrared device on my computer?
Kind regards,
Vegard

Hi,
the Remote Control delivered with the Qosmio F20 is designed only for Windows XP Media Center Edition (all Remote Control's which are designed for Windows XP Media Center Edition work only with Media Center or Windows Media Player). Other program's like Winamp were not supported by these Remote Control's.
I believe, the Remote Control's are made by Microsoft and for a wide palette of product's (the Infrared Transceiver is on nearly all Media Center PC's e.g. Siemens-Fujitsu, the same). So it's a little bit tricky to support more program's then Media Center or Windows Media Player.
For other program's you need a second Remote Control like this one:
http://www.logitech.com/index.cfm/products/detailsharmony/GB/EN,CRID=2084,CONTENTID=9193
br, Ben

Design question ... Remote control and keyboard

Hey i am building a system that should support remote control input and keyboard input
the system is a addons based any user could build any addon he wishes
i have now two main input events types
KeyEventand
RemoteControlEventi wish to use only one type of event
i am thinking of 2 options.
1) Map
RemteControlEventto
KeyEventif this why is the best what happens i a situation that i mapped J key to the RECORD button
how a specific addon should know that a RECORD operation is pressed or it's just a J button
2) Write a new events that contains
KeyEventactions and
RemteControlEventactions
thanks allot

thanks for your replay
i am sharing my thoughts with you ,cause i relay want to do it the best way.
when i mention remote control i meant using a TV/VCR/MCE Remote Control.
(i am usingJLIRC ( LIRC ) )
and i have decided .
i will listen to all keyboard event using "dispatchKeyEvent"
and will map Remote control keys to keyboard keys
here is another question to make sure i understand fully .
the application that i am writing is an add-on based
every programmer that will like to create an add-on
will extend the "Screen" object for is main panel (Screen exnteds JPanel)
so i was thinking when dispatchKeyEvent called i should call dispatchKeyEvent in the current displayed screen
(if the screen dispatchKeyEvent returns false.
the main dispatchKeyEvent should continue.
case true the main dispatchKeyEvent will return true)
then in the screen implementation the user can ask if this key is an Spacial Key
if yes he can get the spacial key attached to this keyboard key
i just wrote an example of how it's suppose to be
public MP3PLayer implemants Screen {
public boolean dispatchKeyEvent(KeyEvent e){
    boolean isSpeacial = RemoteComtrolKey.getInstance().isSpeacialKey(e.getKeyCode);
    if(isSpeacial){
        int mappedKey = RemoteComtrolKey.getInstance().getSpeacialKey(e.getKeycode());
        if(mappedKey == RemoteComtrolKey.REC){
          //do the record
           return true;
    return false;
}georgemc thank you very much

Apple Remote Control and Pismo

Here's one for you. Just bored at work, so I thought I'd throw this out there. While researching a way of using the Apple Remote Remote Control (IR) on a Mac Pro, by maybe hacking up an old broken Pismo and using it's sensor, I wondered if the remote would work at all on a Pismo via the built in IR sensor?. I know of the Manta TR1 solution, but don't care for it being external or using another USB port.
Can this work on a Pismo? Any hacks? Can a Pismo's sensor be used on a Mac Pro or is it built in in a way that it can't be re-used? Or are these two entirely different technology's?
Tony
<Edited by Moderator>

They are different.

Fios remote control and actor info

When I push info on my remote control it only gives me a description of the movie or show, but it doesn't tell me who the artists are. This was one feature I liked from my previous service which was Direct TV. Does anyone know if such a feature is available on the FIOS remote control??

How many times are you pressing the Info button? If you press it a second time you will usually get more information, and if the info will not fit completely in that display a third push of the info button will get you everything that FiOS has available. It is not always as complete as you would like but my experience is that it generally is now fairly good (much better than several years ago).
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

Wireless remote control and FM transmitter in one?

Similar Messages

Maybe you are looking for