Wireless router cisco, linkseys

i have been trying to get my router to connect to my xbox 360 and it has been working for about 2 weeks and then it just stops and i cant get on live then it says its working then i go and try to get on live and it doesnt work. the green line doesnt light up bright green. and thats what its supposed to do when its connected could anyone help me with this problem i really apreciate it.

Who is your ISP...?
What is the model no of the Router...?
Are you able to go online from the computers...?
For X-Box,try this link.

Similar Messages

  • HT1365 just installed a new wireless router (cisco linkseys E1200) and our apple laptops connect fine on one floor but lose connectivity when moved to another.  Other non apple laptops & Ipad connect with no problem no matter what floor they are on

    We just installed a new wireless router to our main PC.  It's a Cisco Linkseys E1200.  All other wireless devices were able to connect without a problem, including my Ipad.  We have 2 Macbook Pro laptops.  They both connect just fine when on the same floor of our house as the router, but when we take them upstairs to the 2nd floor of the house, they lose connectivity and it states the wireless password is not the correct password.  All other 2nd floor laptops have no problem at all with connectivity no matter where they are in the house.  Please help- my husband is on the verge of selling Apple if that cannot be remedied. 

    This would not be a security issue symptom. I would consider checking for sources of wireless interference HT1365
    Trying changing the radio channel on your wireless network.

  • Add second wireless router

    I need to add a second WiFi access point for coverage in my house.  My primary access point is the Uverse Arris NVG589.  Everything with this is running correctly. When I add a second wireless router (Cisco E1200), I connect Ethernet from the Uverse router to one of the Cisco LAN ports (not the WAN/Internet port), and disabled DHCP and NAT on the Cisco.  However, while the hardwired routing works fine on the Cisco on several devices, I can't get wireless to work:  All wireless devices want to attach on WiFi back to the Uverse, and if I try to force them to connect to the Cisco, I can see that the devices are not getting IP addresses assigned. I've tried using the same SSID as the Uverse as well as a different SSID.  I've tried turning wireless security off on the Cisco.  (I've even tried turning DHCP and NAT back on.)  However, nothing seems to change--Devices can't get an IP address from the Cisco. Any ideas?

    See this:
    https://forums.att.com/t5/Features-and-How-To/How-to-put-the-Motorola-NVG589-in-bridge-mode-or-as-close-as-you/td-p/3552057/page/2
    Chris
    Please NO SD stretch-o-vision or 480 SD HD Channels
    Need Help? PM ATT Uverse Care (all service problems)
    ATT Customer Care(all other problems)
    Your Results May Vary, In My Humble Opinion
    I Call It Like I See It, Simply a U-verse user, nothing more

  • How to set up time capsule to transmit in 5Ghz  and wireless router in 2.4ghz

    I have a time capsule connected to my wireless router. After a 2 year use the 2.4 ghz wireless network transmitting from TC seems to have issues. I am trying to configure my TC to transmit in 5ghz and my wireless router (Cisco) in 2.4 ghz, but I cannot find such option
    Thank you in advance

    I do not think there is any option to disable one of the radios on a TC - it is in dual simultaneous mode all the time with no way to alter that.
    Whether or not your Cisco supports that will depend on the specific model - check that models manual or on Cisco's site if you can alter the radios, and if so, how.
    I have a NetGear WNDR4500 (aka n900) and it is pretty simple to do on that - in the web configuration, as admin, you simple check or uncheck the box for each radio in order to turn them on/off.
    P.S. What if you just assign a new SSID to the radio you want off, and simply never set up your devices to connect to it?  That should force them to connect to the other radio (assuming the device supports that frequency itself).

  • Need help configuring Cisco/Linksys wireless router to extend wi-fi signal to living room

    My U-verse wireless gateway is in the back of our house. We live in an old 1920's home with solid wood walls. For our macbooks, we get a pretty decent signal, but my wife's iPad 2 get's poor wi-fi speeds. I bought a Cisco/Linksys WRT160N wireless N broadband router. I have a wired connection in my living room (going to a 4 port switch) then connected to my DVR. I tried hooking up the new router but ended up getting no signal on the iPad. In fact, it caused other issues. I ended up disconnecting it and re-booting my gateway. All came back fine. This wireless router replaces a similar unit that went out in after a power failure, so I know this can be done, but I forget exactly how I confiured the old one. I would like it to "extend" my signal to the living room, but I am also willing to create a new network (different SSID). Do I need to turn of DHCP? Are there any web sites that can assist me in configuring the router? I wish I didn't have to deal with this. The signal from the RG is great when you are in the back room (20+ down). But my wife gets about 3 down on her iPad in the living room. Thanks in advance.

    Hi ,
    I was doing some research on how this can be done. It does not appear there is an option in the Cisco router to set it up as an access point, but there are several options you can do to extend your network. 
    The first thing you can do is just set it up as a router behind router setup, and you will just have two separate networks. Make sure the DHCP pool does not conflict with the U-verse's gateway of 192.168.1.x. 
    The second thing you can do is connect the Ethernet cable to one of the LAN ports on your Cisco router instead of using the internet port. This should make it work like a smart switch. 
    With both setups, you want to probably change the SSID, network key, and wireless security settings to the same thing for wireless roaming abilities. That way, anyone that configures their wireless connection will be connected to both networks. Just make sure the wireless channels are not the same, and I would suggest having them at least 5 apart.
    Hope this helps.
    -ATTU-verseCare

  • I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

    Hello all.
    I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
    I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
    Is anybody able to help me please.

    You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
    You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

  • I have a Cisco wireless router.  Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

    Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

    You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
    Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
    Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
    Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
    If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
    The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

  • Cisco Model 870 router for home office connected to WRT160NL wireless router for personal use

    I am using a Cisco Model 870 router for home office. I just bought a WRT160NL wireless router for home use. I setup the personal wireless router off the personal port of the 870 and can connect with my PC but not with my MAC machines. It can see the Network but when it asks me for passwords, it says they are wrong, which after several attempts I know they are correct.
    The new router is setup as WPA2 personal. Can you advise?
    Cisco Account Manager- Services

    I think I answered my own question. I tried downloading something on my desktop and checked my cellular usage afterwards didn't go up so it's using my home internet and not my data plan.

  • Wireless non-cisco router with aironet 1242 repeater.

    Hello everyone. I'm a newbie here. I just started learning about cisco devices. Sorry if my question seems stupid.
    I have a problem. A friend gave me an AP aironet 1242 and he wants to use it as a repeater for his wireless non cisco router.
    Is this possible? And if it is how can i do it with simple steps.
    Thanks in advance!

    Thanks for the quick response Scott. I 've read this quide before i post.
    The problem is that i can't connect with serial to the ap. So i can't use commands.
    I can connect with ethernet and see the ap interface. When i go and make the radio0 work as a repeater it shows interface down. What i want is simple steps of how to configure it from the interface.
    Sorry again.

  • Need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac?

    need driver or app for ms life cam 3.0 tried to get one off the internet. cisco wireless router software said malware and virus threat. Is it safe for mac? is this software try to protect my pc or is it A threat to macs to.

    There are a number of extremly dubious sites which claim to offer Drivers for common Hardware, but actually are phishing for identies and credit card numbers and candidates to join a bot-net.
    Make absolutely certain you load drivers ONLY from the manufacturer's web site.

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

    My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
    Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
    Who can tell me what does this error message mean and how to elinate this error message ?  also how to deal with 100% CPU utilization ?
    Thanks.

    Hello,
    i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
    also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
    when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
    i also have a could of questions if anyone can help
    the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
    is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
    thanks in advance.

  • I just registered for cisco as a member will that allow me to access wireless router as a guest

    I just registered as a cisco member will that allow me to access wireless router as a guest on the internet

    What is the model number of the Router? Let me know the name of the ISP (Internet Service Provider)? In order to work with the Guest network you have to install the router first. For the setup process, you need to perform the following:
    i. Verify that there is an active Internet connection between the computer and modem
    ii. Setting up the router using Cisco Connect
    Here is the link to setup the router: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21463&userrole=Links...
    Second, here is the link for setting up xbox: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=23787&userrole=Links...

  • Does the airport time capsule eliminate the need for my cisco linksys wireless router?

    does the airport time capsule eliminate the need for my cisco linksys wireless router?

    I understand that your network now looks like this:
    Modem > Security Router > Cisco/Linksys router > Devices
    If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
    Modem > Security Router > Time Capsule > Devices

  • Need help with my E2100L Wireless Router

    I moved back home with the parents after graduating from college while I'm searching for a job and I noticed my parent's wireless internet connection was really poor. I'm normally pretty decent with computers but I haven’t been able to fix this problem so I am hoping if I explain it to you fine folks and can point me in the right direction to getting everything running properly.
    The problem I’m having is with the wireless signal fluctuating frequently when I’m not in the same room with the router. I know the issue is not with Comcast or the modem because when I remove the router and just plug into the modem I get 25 Mbps all day long when I run a test on Speedtest.net.
    The setup is Comcast Internet 25 Mbps, SB6120 Modem, and Linksys E2100L Wireless Router with WPA2/WPA security activated.
    Before I touched anything the modem and router were originally in my parent’s bedroom. I was getting speeds of less than 1 Mbps if any when I was in my bedroom so I moved them into the living room to be more centrally located. Our house is a one story house with bedrooms divided by the living room. The move seemed to help a little but something was still really wrong so I did a hard reset on the router. I setup up the network manually by going through the settings on 192.168.1.1. which made things work a little better. However I still wasn’t getting close to the speeds I should have been getting and when in my bedroom the connection would sometimes drop out altogether. So I did another hard reset on the router and this time I used the CD that came with it (Cisco Connect) to setup the network. That has got my problem halfway fixed because now if I am in the living room and my laptop is connected wirelessly when I run the speed test I get 25 Mbps.
    I thought I have solved everything because in my bedroom the signal was now very good at 20 Mbps… except the 20 Mbps didn’t last. It held around 20 Mbps for the about first 10 minutes but then dropped to about 16 Mbps for a while. A day later when I run the test I now range anywhere from 3 Mbps to 14 Mbps. There seems to be no consistency. I did a hard reset again and setup the network using the CD and the problem persists. I get 20 Mbps in the very beginning and then it lowers from there and fluctuates frequently.
    I thought it might be a firmware issue so I successfully updated it today to the latest firmware “1.0.05 build 4 Mar 8, 2012” but the same thing happens. I just don’t get it. Why am I able to get 20 Mbps for the first few min in my bedroom and then it’s a crapshoot thereafter?  If it were interference wouldn’t the interference always be there and not be a gradual onset? Why when I’m in the living room with the router is it perfect at 25 Mbps but as soon as I go to my bedroom I get a much much lower connection speed.
    I could handle the speed being lower if it was consistent but it’s not. This post has taken me about 20 min to type and while doing so I ran the test a few times at a couple minutes apart and got 3 Mbps, 7 Mbps, and 10 Mbps speeds. Someone please help! This is driving me crazy!!!

    When in my bedroom there are only 2 other networks available to join that belong to neighbors but their signal strength is fair at best while my signal dances between being excellent and good. There is no microwave oven, cordless phone, or garage between me and the router. When I'm in my bedroom I'm no more than 10 feet from the actual router and only seperated by a wall and I'm pretty sure its not a brick wall.
    Again I don't understand how it could be interference. If there was something interfering wouldn't it always be interfering? Like I said in my first post every time I reset the network I get speeds of 20 Mbps for the first few min in my bedroom and then it gradually lowers and I get a fluctuating speed between 3 and 14 Mbps.
    In the settings there is no channel width option of 40 MHz only. I get "20 MHz only" and "Auto(20MHz or 40MHz)" as my options. I have tried them both but don't really notice a difference.
    I am going to try the insider program today to see what its results are.

Maybe you are looking for