Wireless router will not recognize password

My wirelss router will not recognize the password on the router. Would like to change it to something wowrkable.

https://customer.comcast.com/help-and-support/Wireless-Gateway
http://customer.comcast.com/help-and-support/internet/wireless-gateway-username-and-password/
http://customer.comcast.com/help-and-support/internet/securing-wireless-gateway-network/
http://customer.comcast.com/help-and-support/internet/broadband-gateways-userguides
http://media2.comcast.net/anon.comcastonline2/support/userguides/Wireless_Gateway_User_Guide_030811....

Similar Messages

  • Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4

    My 1760 router will not recognize a wic1-dsu-t1-v2 card in slots 3 or 4. They only work in slots 1 & 2. Never saw this before where the same card would not work in different slots.
    Need assistance.
    Thanks,
    Ron
    Router#show version
    Cisco Internetwork Operating System Software
    IOS (tm) C1700 Software (C1700-IPBASE-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Tue 20-Jul-04 07:00 by kellythw
    Image text-base: 0x80008120, data-base: 0x80C74650
    ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
    Router uptime is 20 minutes
    System returned to ROM by power-on
    System image file is "flash:c1700-ipbase-mz.123-6c.bin"
    cisco 1760 (MPC860P) processor (revision 0x500) with 55598K/9938K bytes of memory.
    Processor board ID FOC0849230K (3846615071), with hardware revision 0000
    MPC860P processor: part number 5, mask 2
    Bridging software.
    X.25 software, Version 3.0.0.
    1 FastEthernet/IEEE 802.3 interface(s)
    2 Serial network interface(s)
    WIC T1-DSU
    32K bytes of non-volatile configuration memory.
    32768K bytes of processor board System flash (Read/Write)
    Configuration register is 0x2102
    Router#show flash
    System flash directory:
    File  Length   Name/status
      1   7517112 c1700-ipbase-mz.123-6c.bin 
    [7517176 bytes used, 25775112 available, 33292288 total]
    32768K bytes of processor board System flash (Read/Write)
    Router#show diag
    Slot 0:
            C1760 1FE VE 4SLOT DV Mainboard Port adapter, 3 ports
            Port adapter is analyzed
            Port adapter insertion time unknown
            EEPROM contents at hardware discovery:
            Hardware Revision        : 5.0
            PCB Serial Number        : FOC0849230K
            Part Number              : 73-7167-05
            Board Revision           : B0
            Fab Version              : 04
            Product (FRU) Number     : CISCO1760
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 03 16 41 05 00 C1 8B 46 4F 43 30 38 34
              0x10: 39 32 33 30 4B 82 49 1B FF 05 42 42 30 02 04 FF
              0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            WIC/VIC Slot 0:
            FT1 4351
            Daughter card-Version 4 TLV Cookie Format
            Hardware Revision        : 1.1
            PCB Serial Number        : FOC09053XP1
            Part Number              : 73-8346-04
            Board Revision           : A0
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Deviation Number         : 0-0
            Product (FRU) Number     : WIC-1DSU-T1-V2     
            Top Assy. Part Number    : 800-22193-02
            CLEI Code                : IP4I380GAB
            WIC/VIC Slot 1:
            FT1 4351
            Daughter card-Version 4 TLV Cookie Format
            Hardware Revision        : 1.2
            PCB Serial Number        : FOC10073JND
            Part Number              : 73-8346-05
            Board Revision           : A0
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Deviation Number         : 0-0
            Product (FRU) Number     : WIC-1DSU-T1-V2     
            Top Assy. Part Number    : 800-22193-03
            CLEI Code                : IPUIAPRRAA

    Hi Ron,
    Slots 3 & 4 are for VICs only.
    Have a look at the Location/ Function table here:
    http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml
    cheers,
    Seb.

  • WRT54G Wireless Router Will Not Assign a Network Address

    A Linksys WRT54G router will not assign a network address when I access the router using a Linksys WPC600N wireless card. I have the same problem accessing the router with a TRENDnet TEW-621PC wireless adapter. Both wireless adapters are assigned network addresses when I use other wireless routers. Also, I have no problems being assigned a network address when I access the WRT54G router in question using an old 2WIRE 802.11b wireless card.
    I have tried "Repairing" the connection, I have used ipconfig to "release" and "renew" the connection. However, each attempt fails to have a DHCP address assigned.
    I am a visitor at the work location with the connection problem, the router works for others without any issues.
    Thanks

    Well in such case .... you can try few settings on the wireless adapter ....
    If you are using WLAN monitor .....
    Click start >> All programs >> Linksys wireless monitor >> Click on "Profile" >> Delete all profiles >> Click "New" >> Type in the wireless network name >> Click next >> Configure the rest of the wireless settings same as in the router ...
    At last point it shows .... all the configuration settings ...reconfirm that  >> Click on connect ot a network & reboot the computer ...
    After reboot see if it shows connected or not....
    You can also use Static Ip in the configuration ....

  • Tbird will not recognize password for new TWC account, which is active. So, cannot set up email

    Trying to set up an existing email account on Tbird. It will not recognize my password. Well, TWC does. Why doesn't Tbird? How do I add this account?

    Thunderbird does not "recognize" and email password. It provides the one you stored in it to the email server when asked for one. It would be the email server rejecting it.
    If you are sure you have the correct password then it might be the format of your username or some other server setting that is incorrect.
    Get a list of server settings from your provider and make sure they are correct in Thunderbird.
    Pay attention to your username format. Some providers want just the username and others want the entire thing including the @provider.com.

  • WRT54G ver.6 wireless router will not connect either way

    WRT5G ver.6 Router will not connect to the internet or other PCs wired nor wirelessly, PC shows "limited or No Connection".  The orange light is not on and will not come on when I press the Cisco System Light/Button on front.  I cannot access the router through the browser nor PING it through the command prompt.  I have tried to reset it and unplug it for few seconds, please, me OBIWAN, your my only hope.

    I think your router is bricked, You can try the steps on this link and check if it solves your problem or not.

  • HT201514 My Time Capsule/Router will not recognize the other Apple wireless devices that I own.  The older Air Port goes online immediately and recognizes each one by name.  The Time Capsule/Router does not finish the start up--long yellow flashing light.

    I recently purchased a MacBook Air and an Airport Time Capsule.  The Time Capsule does not recognize my old iPhone, my old iPod Touch and my new MacBook Air.  The old AirPort Extreme works perfectly on the network, so I know it's not my internet.  It also recognizes all my devices by name and hooks them up to the internet.  Is the Time Capsule broken or is there some secret trick I need to know to get it to work?
    Ellen H.

    Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
    It sounds like you are connected to the Ethernet LAN port.

  • Time capsule wireless router will not work

    I have a Time Capsule that I use as a wireless router in my condo.  Our internet company was recently purchased by another company, and after the transition, I am not able to connect to internet wirelessly.  My condo is wired with active ethernet ports.  If I plug the ethernet cable directly into my computer, I am able to log in to the ISP's main page and connect to the internet without any problems.  However, if I plug my ethernet cable into the Time Capsule as I did before, I cannot connect.  Before the company bought the old company, I didn't have any issues.  I've called their Tech Support 3 different times about this and they tell me they don't provide support for my wireless routers because there are so many different types.  They suggested resetting the router password, but I'm not completely sure how to do that.  Is that different than my airport password?
    I should also note, that if I pull up System Preferences and to the "assist me" feature under the Network option, it tells me that I'm connected. 
    Any help you can provide would be fantastic!  I'm at my wits end with this issue, as I connect a number of devices to my Time Capsule wirelessly.
    Regards,
    Jake

    I have a 2TB Timecapsule and really only use it for Time Machine backups. But the Wi-Fi side is used to sync my iPad at times.
    Mine is wiredup thus;
    Eth cable from iMac to modem (not the WAN port should you have one),  then eth cable from modem to T/Cap in the WAN port (bottom port with an O sign above it)
    I believe when its connected up you may have to set up a wireless network. Follow the instructions to set up Wi-Fi and Network
    and then give it a password. The WiFi icon should appear in the menu bar where you can switch it on or off.
    Its been sometime since I set it with the help of Apple Techs so I might be a bit rusty.
    Alan

  • I can connect hardwired but my wireless laptop will not recognize my router wirelessly

    I have the WRT54G and for a while my laptop was working with my router wirelessly.  We then hooked 4 other computers into it.  At that point my laptop could connect to my router wirelessly but i could not get on the internet.  So i went to the website 192.168.1.1 and tryed to change the security settings.  I reset the security settings and now I cannot get on that website anymore.  My laptop doesn't see the wireless signal from the router but it does work hardwired.  anyone have any ideas what i messed up??? oh and by the way i have vista
    Message Edited by   on 07-30-2007 02:36 PM

    did you change the router settings from your wireless laptop ?? its always recommended to change the router settings from the wired computer ...
    also , on the router web interface , try changing the wireless channel - either 1 or 11 , beacon interval - 50 , Fragmentation threshold - 2306 , RTS threshold - 2307

  • HP Officejet Pro L7780 All-in-One Printer & Verizon D-Link wireless router. will not connect

    I have a HP Officejet Pro L7780 All-in-one and not able to get it to connect to my Wireless  Verizon D-Link Router.
    Please advise.
    aileensnider

    Let's start here.
    Printer does not maintain wireless connection.  
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • After migration lion will not recognize password at login

    I re-installed lion on my new mini to get to Setup Assistant to transfer files from my older iMac. The transfer went well, I think. However, I cannot login. I have tried no password (the way the old iMac was set up). I have tried every password that I can think of including my Apple ID password. I did not set up any password for the new computer, but it did offer a hint for a password that it wiil not accept. How in the world did it come up with a password with out my consent? and how can I access my new computer?

    Problem solved from a link posted before:
    http://hints.macworld.com/article.php?story=20110727063028750
    One problem was the imported screen resolution, which obscured the menu. Once I reach up beyond the screen frame and clicked blindly, I could find the Terminal program in the pull down menu. It works now.

  • My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd

    My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
    I have entered the password several times and I know what I have entered is correct

    Hi @Southglen,
    Welcome to the HP Forums!
    I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
    I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
    I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
    After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
    Let's start with these steps, and we will go from there!     
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Printer will not recognize wireless router

    Printer was previsously working fine. Moved and network changed  via AT&T Uverse and the HP 5530 printer will not recognize the wireless router information. I have uninstalled the printer from my ASUS laptop and tried to re-install to no avail. The cd that came with the printer woould not lnstall the printer again. The  printer is less than a year old. I have no idea what is going on. Can you help me fix this problem?
    This question was solved.
    View Solution.

    Replacing your wireless router try here.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • My new iPad will not recognize wi-fi password

    I have a new iPad and it will not recognize my password to get connected.

    The password should be listed on the side of your modem/router,
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My netgear router does not recognize my password and i cannot access it with my iphone

    My Netgear DG834PN router does not recognize my user name or password when i try to access WI FI with my iphone.I cannot get wifi on my iphone from this or any router. The router is a wireless and hardwired unit.

    Is your password by any chance in Hex? (all numbers or letters a through f) If so you may be able to translate the hex into ASCII or you could change to an ASCII password. I had to make that kind of change. Good luck.

  • My ipad will not recognize my home wireless

    my ipad will not recognize my home wireless

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • Malware no Firefox 20.01 , como corrigir?

    Um malware se instalou no meu firefox, versão 20.0.1. Não consigo identificá-lo nos plugins, também já fiz uma varredura com o avast, e não resolveu o problema. O malware faz com que apareça janelas de verificações de plugins e outros pop-ups. Identi

  • Pacman cannot find i3-wm [Solved]

    Hello... several weeks ago i installed archlinux and few days ago i update the pacman database and upgrade the whole system. At that time i only had basic archlinux install with no x-server. Today i wanted to try i3 window manager, but when i try to

  • Cache update / Missing objects

    Dear all! Since two days we have following problem: After activating changes in integration directory sometimes the changes are not transmitted to the Runtime Cache, sometimes they are. The Status is everytime "green". A manually (full and delta) ref

  • Playlist folders are supported on the new Nano! (and Classic)

    Hi folks, You may have noticed that in iTunes 7.4, playlist folders now show up when selecting which playlists to sync to your iPod. Originally, people thought this was just cosmetic on the iTunes side. I am here to tell you now that it is not just c

  • Confusion about installation of Air 2.6

    Hi everybody, I would like to update to Air 2.6 but I get confused when I read information on the web. I am using MacBook Pro iOS 10.6.5 and flash CS 5 for apps development. 1. Is installation of  Air 2.6 a simple step by using the Air 2.6 installer