Wireless Router Without Wired Host

I got my new Linksys WRT54G wireless router hooked up last night but I'm having trouble getting it working.  I want to use it without having a computer wired to it but all the Linksys instructions show it connected to a desktop via an ethernet cable and the wireless connection going to other computers.  Do I need a host computer or can I connect the router only to the cable modem and have it work wireless with my laptop?

You only need to have a computer wired to the router for initial setup and maintenance of the router.  This includes:
1) initial setup of the router
2) firmware upgrades for the router
3) changing settings in the router, especially wireless settings
Therefore you will need a wired connection the first day, and occasionally thereafter, when the router needs maintenance.
Otherwise, you can use it wirelessly.  You do not need to have a computer constantly wired to the router.

Similar Messages

  • Wireless Router WRT160N wired to desktop, I loose internet when wireless laptop is off.

    I have the wrt160n v2 wireless router, it does not work for me.
    If my XP wireless laptop is only powered ON the Vista desktop internet wired will work, I am not wired or wireless using the laptop, not in internet, only powered on.
    If the laptop is off I have no internet on the desktop, still plugged thru the router.
    The laptop is used and I was unsure if the built in wireless was new enough so I bought a card to go in it for wireless.
    When everything is on all is well for playing on the internet times two computers, but if you turn off the laptop I have to plug the internet directly into the desktop to continue in the internet.
    I started to work with tech support yesterday and they are hard to understand. I did bring in the newest firmware and still have the problems.
    Can anybody help me, I really don't have the time to be on the phone for hours figuring this all out.
    Thanks
    Jackie
    Solved!
    Go to Solution.

    Well thank you for my promotion to deity status!!!
    Unfortunatley my REAL boss at my REAL job probably doesn't read these forums!!!!
    And I wish everyone that was having this problem with 160Nv2 firmware could get some kind of compensation from Linksys, but again, unfortunately, I have no control over that, not being a Linksys employee...I had a Cisco CCNA once, but it expired.....and that is as close as I will ever probably come....
    Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
    D-Link DSM-320 (Wired)
    Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
    SonyBDP-S360 (Wired)
    Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
    IOmega StorCenter ix2 1TB NAS
    Linksys WVC54G w/FW V2.12EU
    and assorted wired and wireless PCs and laptops

  • Accessing wireless router thru wired modem/router

    I am running XP Home with DSL connection to the internet. I have a ZyXEL Prestige 600 modem/router. Notice that it is a modem/router all in one, not two different items. Someone gave me a used Linksys WRT55AG wireless router that I am trying to setup for use with my daughter's laptop. I have the phone line hooked to the wired modem/router and then the modem/router connected to a hub. From the hub I go to my two desktop computers. I can come off the hub and connect to the wireless router. Then I open my browser (firefox) and type in 192.168.1.1 and can access my ZyXEL modem/router. I have tried 192.168.1.2, 192.168.2.1, and several other combinations for the last two numbers. My default gateway is 192.168.1.1. My IP address is dynamic but is listed as 192.168.1.33. How do I get to the wireless router to re-do the setup?
    thanks,
    Harold

    Hookup one computer to the router all by itself via cable to one of the lan ports in back.  Push and hold the reset button in back for 30 seconds, release.  Now power cycle the router.  Connect to 192.168.1.1 with username blank, passwork admin.  Reconfigure the router to the IP you need.

  • Need help connecting wireless router to wired router

    Our computers (1 desktop, 1 laptop,and our Xbox) are presently connected to a Dynex DX-E401 4-Port/Cable/DSL Router. We would like to keep this arrangement for the XBox & desktop for gaming purposes (general consensus seems to be a wired connection is faster than wireless). However, I would like to add a Linksys WRT54GL Ver 1.1 wireless router for another laptop to roam around the house. Can I just connect the Linksys wireless router into the Dynex wired router, or does everything now have to go through the wireless router first? To connect the wireless router, do I run the setup CD in the laptop that I want to primarily use the wireless router? I'm not the most savvy when it comes to this stuff, but can follow detailed directions. If there are any links/videos, etc. you can refer to me to that already addresses this issue, that would be great. I greatly appreciate any assistance you can provide.

    You don't run the setup disk at all. Actually, you don't want a router you only want a wireless access point.
    Wire a computer to the WRT. Open the web interface at http://192.168.1.1/ (default password is "admin").
    On the main setup page, change the LAN IP address from 192.168.1.1 to a free IP address in your DSL router LAN. If the DSL router uses 192.168.1.1 as well, you may be able to set it to 192.168.1.2 unless the DHCP server on the DSL router uses 192.168.1.2.
    On the same configuration page of the WRT disable the DHCP server.
    Save settings.
    Unplug the computer.
    Wire one of the numbered LAN ports of the WRT to your DSL router.
    That's it. Now you are able to do any further configuration through the web interface of the WRT at http://192.168.1.2/ (or whatever IP address you have set).
    Don't forget to enable wireless security WPA2 Personal with AES and a strong passphrase and change the router password "admin" on the Administration/Management page.

  • Adding wireless router to wired home network

    I have a home network consisting of two PC's which share a satellite internet connection via a wired BEFSX41 router.   The PC's and router/satellite modem are in three separate rooms connected by Cat5e cable. 
    Now I want to add a new laptop (third PC) to my network using a WRT54G router and a WPC54G notebook adapter.  I just ran the WRT54G wizard and it makes no sense for my configuration. 
    Should I connect the WRT54G's internet port to a spare port on the wired router, then power up wired, wireless routers and the modem in sequence?   Then run the program at the final step of the wizard one of my original PC's?  Any help will be appreciated.

    Cleck this link out. The only thing I would do is make sure you connect the cable from a numberd port to ort number 1 on the wireless router and set up the SSID and wireless security.  Make sure you have the latest firmware on the wireless router because in this configuration you will not be able to access its user interface.
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3733&lid=3726837401B...
    Message Edited by Ikester on 07-09-2007 11:44 AM
    Richard Aichner (Ikester)

  • Network Magic thinks wireless router is wired.

    Please tell me how to correct this issue.  Network Magic sees my wiresless d-Link router (DIR-601) as a wired network.  I have checked the router settings and everything says wireless.  How can I correct this?  thanks?

    shaunpcoleman wrote:
    Network Magic Version:  5.5.9195.-Pure0
    Platform Version:  11.2.9195.1
    O/S:  Windows 7 Pro SP1
    Router:  D-Link DIR-655 ver 1.32
    Switch:  D-Link Green DGS-1008D
    I turned on my computer today and all of a sudden Network Magic thinks that my computer is on a new network! It is NOT on a new network. I did some reading and it says that on the Network Map screen there should be something to click on to make your current network your home network - I see nothing.
    So, how do you make your current network your home network when Network Magic thinks it isn't?
    Hi shaunpcoleman,
    How are you connecting to the Router? Wired or Wireless?
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Wireless router without a cable modem

    Can this be done? Where i live i dont have access to a cable modem but i would still like to have a wrieless net work in my house, any sugestions?

    ok, last time i tried to install a router it would not let me install it without a cable modem, so a router like the WRT610N would do what i need it to do as far as being able to install it without a cable modem correct?

  • Any way to set up Time Capsule as wireless router WITHOUT Airport Utility?

    I'm Macless at the moment and I just had to reset my Time Capsule... now it's showing up as Apple Network blahblah and it's completely visible and unprotected.
    Tried the usual 192.168.0.1, .0.2, .1.0, .1.1, .1.2 without any luck. Any way to do this? Do I need to be plugged in via ethernet?
    Thanks.

    AirPort Utility is the only way to configure the Time Capsule.

  • WRT54G Wireless Router & RT31P2 Vonage Router

    I've had to guess how to set this up and thought I had everything ok.  Phone Connection still works, wireless network is recognized by my wireless laptop, my wired computer still works, but when I try to make the wireless connection from the laptop, it attempts to connnect, appears to connect, and then immediately drops the connection.
    Any suggestions?  I've had the Vonage wired connection with the RT31P2 router for over two years w/o any problems, thought I try to go wireless with a laptop so I could use it in other parts of the house.

    Firstly you need to make sure that the problem lies in the wireless router or wired router ... so connect the computer directly to the Vonage router ... observe the connection ... if working fine ... connect back the wireless router to the wired router ... now check the wireless settings on WRT54G ... under wireless use any non-linksys network name ... change the channel from 6 to 11 ...click save settings ... go to advance wireless settings ... do this settings .. Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings"

  • Trying to connect my wired PC to the wireless airport express via the wireless router.

    Trying to connect my wired PC to the wireless airport express via the wireless router.  TP-link wired/wireless router.  Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever.  The amber light is blinking.  Thanks in advance for the help!

    If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
    Wired should be easier.  Just use a network cable to connect to the router.  Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings.  If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
    If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports.  Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb.  Join that network and, using the AirPort Utility, configure your AX as a network client.  Go to Wireless > Wireless Mode: Join a wireless network.
    Select your router wireless network from the drop-down menu, select the appropriate security and type in your password.  Click update.
    It'll restart and automatically join your network.  Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
    Let me know if this worked.
    Jorge...

  • Is it possible to use AirTunes without a wireless router?

    At home, I have a MacBook and use AirTunes with my AirPort Express on my home wireless network. It all works great without any problems.
    But I also occasionally provide music on at the neighborhood pool (for kid's parties, etc) which does not have any kind of internet connection (no WiFi, nothing).
    I was wondering if it's possible to stream the music wirelessly from my MacBook to my AirPort Express (which will be plugged into a sound system) without a WiFi network present? In other words, is there some kind of way to set up wireless communication between the MacBook and the AX without having to bring and configure a wireless router at the pool?
    PS) More info:
    The reason I want to do it wirelessly is so that I can locate the MacBook somewhere away from the sound system to not only protect it from water/traffic, etc, but also somewhere where the kids won't see it and "fight" over changing songs, etc.
    And also, as a side question, I have Apple's "Remote" app on my iPhone. Just wondering if I can control iTunes with my iPhone; again without the presence of a WiFi router?
    Thanks very much in advance!

    In other words, is there some kind of way to set up wireless communication between the MacBook and the AX without having to bring and configure a wireless router at the pool?
    Yes and no. The AX IS a wireless router. You would simply configure the AX to create a wireless network. Your MacBook would connect to that network and stream the music.

  • I have a new macbook pro hooked up to a belkin wireless router. My HP officejet printer is also connected to the router. I cannont get the printer to work from my computer without restarting my computer evertime I want to print. How do I fix this?

    I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome

    Mac OS X 10.7 Help: Troubleshoot a network printer

  • Ow can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

    How can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

    bzb888 wrote:
    I have a wireless transmitter already, would like to use the capsule just as a back up drive, I tried hooking up from the ethernet port on the imac to the one of the ports on the capsule but then my Wifi would not work. do I hook the cable to the port with the circle or the arrows?
    It is better to have the TC as part of the main network in bridge. You do not need to run wireless.
    If you want to use the TC plugged in by ethernet and still use wireless for internet, that is possible but the setup is rather more complicated.. the computer must not get confused about which device to use as a gateway or dns server.
    See info in this thread on setting this up.
    https://discussions.apple.com/thread/4817218?tstart=30
    I need to add.. a USB drive would be cheaper, faster and more reliable. It is really poor use of a TC.

  • Can I use the Time Capsule as a backup drive and wired network switch? I do not want to use the wireless part as I already have an ADSL 2  Wireless Router for that. Thanks.

    Hi
    I just went from PC to MAC. Have a MAC Mini and wanted to get a time capsule for backups. I would like to use it as a wired device instead of wireless. Would me connecting it to my router do the trick? Can I then use the LAN ports in the back of the capsule like I would a network switch? Can I just disable the wireless router part of the capsule as I already have an ADSL2+ Wireless Router.
    Thanks

    I wanted to run a cable upstairs from the switch downstairs so the Time capsule becomes my upstairs switch (as I only have Wireless upstairs at the moment. That will work right?
    Cheers.
    Yes, that is also fine.. ethernet being the cable you run.. !!
    You still don't have to use a TC.. which is still a rather expensive box for the job.. an Airport Extreme would offer the same exactly minus hard disk for cheaper price and more than likely better lifespan.. TC with internal power supply run too hot.

  • I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

    I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
    Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
    Please anybody out there that can help!!!??

    Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

Maybe you are looking for