Wireless router wrt310N can't connect to the ps3

I just bought the wireless router wrt310n yesterday got everything setup and installed. My PC works fine with the ethernet cable plugged directly into the router from my modem. But my router does not detect the connection to ps3. When I do the connection test on my ps3 it says exchanging key then connection failed!. Please help me open ports or resolve this issue. Thanks.

I bought the same router for my ps3 i'm using it wired but when i hooked up my psp i had the security on wep2 personal, make sure the passphrase it typed correct it's case sensitive,also check your wireless broadcast and make sure it is in manual and b and g mixed and not broadcasting n since the ps3 is wireless g.

Similar Messages

I have an Airport Extreme wireless router & I can not connect my Kindle.

I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.

If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

Why is my iPod touch able to see my iMac as a wireless router but can't actually share the connection properly?

So I've set up Ethernet Internet Sharing via my iMac, and my iPod Touch and other devices can see the network. I type in the password, it succeeds but instead of a tick appearing I get the grey loading wheel forever. Why can I 'connect' to the network but not actually gain internet access? I've even tried no password and the same thing happens.
Thanks for your time.

i have same problem if i close sharing and reoopen my sharing i get a 1-5 minute connection
not sure 1-5 minutes is helpful but if i solve it i will let you know

My Macbook Pro doesnt seem to connect to my Belkin wireless router. It is connected but the internet would not work. any suggestions?

hey guys. I am having trouble with my internet. My MacBook Pro seems to be connected with Belkin wireless router, but the internet would not work. We recently changed the router so its pretty new, and it used to work on my HP laptop. Although there were some problems, it still worked. But now, the internet works and stops suddenly, and then works again.
I would love to hear some suggestions to get rid of this.
Thanks
Kiran

If you have not already done so, read the troubleshooting section in Belkin's user manual, contact their customer tech support by phone or go to its website. Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

AE detects my wireless network but can't connect to the Internet

I have a DELL PC with a Linksys WRT54G router. I recently had an Airport Express installed into my Mac Mini so that I could access the Internet wireless. Although Airport Express detected my existing wireless network, I am having problems connecting to the Internet. I read several of the helpful articles in this discussion forum and using the information I learned I was able to successfully connect. But then I accidentally tampered with the settings on my Mac Mini and now for the life of me I don't recall what I did to get back onto the Internet?
Does anyone have any ideas?

1. unplug the DSL
Modem and router
2. plug the router back in and wait for the display
lights to indicate ready.
3. plug in the dsl modem and wait for it to display
ready.
4. turn on the computer that is hardwired to the dsl
modem and router
5. then try to get online thru my Mac OS.
Is this correct? Or should I do something else?
Perhaps disconnect everything including the computer
and attached ethernet cables?
Close, but you need to reverse the power-on order
that you described for the modem and router, as
follows:
Modem/Router Power ReCycling
- Power-off the DSL modem, Internet Router, &
computer(s). (If possible, leave the modem off
overnight.)
- Power-on the DSL modem; Wait at least 30 minutes.
- Power-on the Internet Router; Wait at least 5
minutes.
- Power-on the computer(s)
You don't need to disconnect any of the cables.
Thanks so much for your help. Everything you suggested was right on. I am not running both my desktop PC and MAC wirelessly.

IPod touch recognizes Wireless Router, But Can't Connect To Internet.

Hello everyone,
My iPod Touch 3rd Gen 3.1.2 recognizes the router and connects to it, but no WiFi meter is showing (the one at the top left corner near "iPod")
15 minutes after I had been using the internet on my iPod touch 2G, I find that my iPod's WiFi connection was disconnected. At first I thought this was a router/modem problem, but I am able to use WiFi through all my computers at home. I tried forgetting the network, resetting my router, and resetting the network settings, but the results are the same.
When I go to Settings>Wi-Fi>[more router options] , the iPod does not show any IP address or subnet mask or router info. But there is a checkmark right next to my router's name.
When I try going to Safari, it gives me a "cannot open page" error: "Operation could not be completed. Invalid argument."
I am using a Linksys WRT310N under WPA2 encryption.
Please help!
Thank you
Message was edited by: wjose7890

Nevermind. For some odd reason, it decides to work again a couple of hours later. Really weird, but at least it's working fine now.

Wireless router wrt310n v2 installation issue

Hy
My first post here, sorry if this exist or it was solved already but couln't really find it.
I just bought a wireless router wrt310n v2. Right in the intallation it gives me a simple Runtime error. No reason, just pain error message. I wonder if the root of the problem is the fact that I bought the product in the states and I try to use in Europe, or something else? I'm using with a Sony Vaio vgn-fw560f. Any help will be appreciated. Thank you.
With repect
Muszka

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the WIFI built into the Imac??

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??

jason1074 wrote:
I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??
For the Internet, you should set up a router on your modem, this router will route the packets to any device on the local area network.
If you use the iMac as a router, like if you connect the Ethernet cable from your modem to the iMac, then broadcast a Wifi signal, the iMac will have to remain on all the time, at full power. Thus drastically shortening it's lifespand.
A router is only about $100 or so, offers much better security as it's like a large guard, someone has to hack through router first to get your iMac or other devices.
If it breaks, you buy another 5 years later for another $100, so your not placing all that always on wear and tear on your expensive iMac.
Apple's airport routers are pretty good, easy to set up and have automatic firmware updates, plus music sharing etc.
Set up properly you will be very secure
WiFi security issues, at home and WiFi hotspots

Linksys Wireless Router BEFW11S4 - Shows connected, but I can not connect to the internet

I have a Linksys Router hooked up to a cable RCA modem using Comcast Cable. There are 3 laptops that hook up wirelessly to the router and they have been working fine for the past two years. However, recently all three laptops can not connect to the internet for some reason. I checked with Comcast and they checked out the modem and tested it and it works fine. When I hook my laptop up to the modem with an ethernet cable, it works fine and I can get on the internet. When I hook the modem up to the router and try to connect wirelessly it appears to be fine. It shows that the router is connected there is connectivity on all our laptops, however when I open a new internet explorer page to get on the internet, it does nothing. A blank page appears and the webpage will not load. Does anyone know how to fix this? Is it the router or the way it is setup in the admin page or could it be possibly something else? Thanks.

As it shows connected under wireless ....check the Ip address under wireless network connection .....
If it shows Ip 192.168.1.X ....with gateway 192.168.1.1 ..... try to pnig the gateway address ...
If getting reply try going online ....
Also disable the firewall first.....

Can't connect to the internet through router

I have an HP Pavillian DV6 laptop, DSL connection through ATT, a Linksys wireless N router. It had been working fine for abourt 7 months, Then all of a sudden I lost my network connection. I clicked in the right hand corner to connect to the network & it was gone. I have tried to re-run the software for the router & I get to where it wants to connect to the internet & it won't. I have tried to log into the router to run the setup on the internet explorer page using 192.168.1.1 I now can find my network, I click connect, it says it is connected, but no internet. I can connect to the internet if I plug the modem directly into my laptop, but once I connect from the modem to the router, it will not connect to the internet. I have been searching HP, CIsco, & even my maker of my wirelkess card to see if there were any driver updates. My wireless card says it is up to date. I tried to rest my BIOS, that didn't help either. I'm stumped, & I've spent entirely too much time trying to figure this out with no success, PLEASE HELP!!!!!

Reset your router to defaults. Here's the procedure.
Reconfigure the router so it would connect to the internet. Here's the procedure.
Reconfigure your wireless settings. Here's the procedure. I suggest you set your SSID to something unique. In addition, set your wireless security to WPA or WPA2. Don't use WEP as it is insecure.

Can't Connect To The Internet Or Router

I have had my router set up for about three years. It's always worked perfectly fine until the other day. I think that the router just died, but I'm not sure and I want to try and fix this one before I just go out and buy a new one.
Basic Background Information:
Model No:WRT54GC
-The router is and always has been hooked up to a surge protector and there haven't been any other recent surges in my home.
-When the wireless router is connected to the computer (using a functioning Ethernet cable ) I cannot connect to the internet or the router. (I can't even put the IP into a browser and bring it up. I also tried the factory setting IP, just incase it actually did reset, and that doesn't work either.)
-When the router is plugged in I can't see it from any other wireless computer. (I also checked for any new signals and did not see any after I reset the router.)
-LEDs look like:
*Power = solid green
*Internet = solid green
*wireless = hard to tell - doesn't look like it's on at all
*all other Ethernet pluggins = solid green
What I've Tried So Far:
-I couldn't connect to the internet so I plugged the modem directly into my computer. --> The internet works.
-I tried unplugging the router, waiting, and then plugging it back in. --> I couldn't connect to the internet or the router.
-I tried the reset button. --> I couldn't connect to the internet or the router.
-I tried leaving the router unplugged all night and then plugging it in and starting the process all over again. --> I couldn't connect to the internet or the router.
-I also tried downloading new firmware, but since I can't connect to the router through any of my browsers I am unsure how else to update the firmware.
Thanks in advance for any help!
Message Edited by mcgree on 08-08-2009 03:29 PM

Try upgrading your Router's firmware and then you can reconfigure your Router from the scratch...
As you are not able to go online through router...you have to download the formware by connecting computer to the modem..
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Now reconnect the Modem to Router on Internet Port and from Computer to Router on Ethernet Port 1and now Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...
Now you can upgrade the firmware using TFTP utility...Download tftp utility.
Follow these steps to upgrade the firmware on the device : -
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

I can't connect to the router in my home. Things were working fine as usual - I attended school and connected to their WiFi network as usual. When I returned home I could not connect to my own home router. The Ipad seeks the network but nothing happens

I can't connect to the router in my home. The Ipad seeks the network but nothing happens. I went to school and connected to their WiFi network as usual with no problems. When I returned home I could not connect to my home router. The Ipad seeks the router number but nothing happens. I rebooted the Ipad a few times in the school. The numbers identifying the router, etc. on my Ipad no longer appear there.
TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
I reset the network settings to the factory defaults but this doesn't fix the problem.
What can I do to reconnect to my home router?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet.

The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet. I'm on my home network and have never had trouble before. My iPad is current on all updates. I have tried to reset the network settings, nothing has worked. I can connect to the internet via my iPhone personal hotspot and all other wireless devices are operating normally on my home wireless network.

I am also having this issue. My boy just got an iPod 4 touch, upgraded to iOS 6. I have a D-Link DGL-4300 108G Wireless Gaming Router. With the iPod I can connect to the router, get an IP address (either DHCP or Static) and even browse through the menu on the router, but I can't connect to the internet.
With a DHCP IP address the iPod give the error "Not connected to the internet" with the static IP address it takes a long time when trying to connect to a website but then it gives the error "server stopped responding".
Clearly the issue is in some setting in the router. I've tried setting up a filter so that the iPod will always have access based on MAC address. I've tried changing the various wireless connection settings, all to no avail. I would greatly appreciate some guidence here.

Can't connect to the internet with my wired desktop computer or my wireless laptop!

I'm stumped? Tonight I was surfing the internet when all of a sudden I lost my internet connection from my desktop computer? I tried various solutions to fix this but nothing worked? I'm currently hooked up to a wireless router model WRT160N. Here's the clincher, I unhooked the ethernet cable from the port on the router labeled "internet" and hooked it back into my ethernet port on my desktop computer and persto everything worked fine!! I can't connect to the internet either using my laptop!? I hooked everything back up to my router and tried accessing the internet but nothing worked? When hooked up like this I lose my internet connection on my desktop computer as well??? I'm confused??? What could be causing this??? I've just recently configured my router last Satuday with the help of a Linksys technician?? I bought my router last tuesday!?! Need help here!!!! Both my laptop and desktop computer have Windows Vista Home Premium as OS.

You need to re-configure your router...
If your Internet Service Providor is Cable follow this
If your Internet Service Providor is DSL follow this

Wireless router wrt310N can't connect to the ps3

Similar Messages

Maybe you are looking for