Wireless router wrt310n v2 installation issue

Hy
My first post here, sorry if this exist or it was solved already but couln't really find it.
I just bought a wireless router wrt310n v2. Right in the intallation it gives me a simple Runtime error. No reason, just pain error message. I wonder if the root of the problem is the fact that I bought the product in the states and I try to use in Europe, or something else? I'm using with a Sony Vaio vgn-fw560f. Any help will be appreciated. Thank you.
With repect
Muszka

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

Similar Messages

Problems after wireless router (WRT310n) firmware update.

I updated the firmware on my wireless router (wrt310n) yesterday and now I am having major issues connecting my laptop to it via wireless. After the update, I reset the router as well as unplugged the power source. Once the update and everything was reset, I re-entered all my settings and set the computers back up using the LELA. I go to change the laptop to wireless and it says it can't connect to it. I did the LELA update on the laptop thinking that would fix it, but it didn't help. However, the whole time I am able to connect to the router using a ethernet cable. I turned off all of the encryption settings, firewalls, and broadcasted my SSID. I searched this forum for some help and one topic suggested somethings, which I did, and I was able to connect wirelessly with the encryption. I thought I was done and set-up, until later that evening. I turned the computer back on only to see the same problem again. I decided to deal with it the next day (today) by uninstalling LELA and just using Windows to configure my wireless settings. As soon as I uninstalled LELA, entered the key into the Windows program, it worked like a charm. Until tonight, when I turned on the computer. Now I'm connecting to the network wirelessly, but it says "Limited or no connectivity." Acting like there is no encryption key entered. I go to "View Wireless Networks" and it says "WIndows cannot configure connection. If you have another program to manage this wireless connection, use that software." The thing is, I don't have another program on here to manage a wireless connection. Sorry for the long post. I figured if I didn't type everything out, people would have just asked me questions. I had no problems with this router until I did the update yesterday. If it can't be fixed, is there a way to revert back to the old firmware? Thanks in advance.

Well you should adjust the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Before you attempt to connect to your wireless network you should first check your Programs menu if there is any Wireless Program(like 'Intel Proset' , 'Dell Wireless WLAN' , or anything that gives you a clue of a Wireless Program/Utility/Software)...You should use the Wireless Utility/Software(if any) to connect to your wireless network and not the Windows default Wireless Program to avoid any conflicts...

Wireless router wrt310N can't connect to the ps3

I just bought the wireless router wrt310n yesterday got everything setup and installed. My PC works fine with the ethernet cable plugged directly into the router from my modem. But my router does not detect the connection to ps3. When I do the connection test on my ps3 it says exchanging key then connection failed!. Please help me open ports or resolve this issue. Thanks.

I bought the same router for my ps3 i'm using it wired but when i hooked up my psp i had the security on wep2 personal, make sure the passphrase it typed correct it's case sensitive,also check your wireless broadcast and make sure it is in manual and b and g mixed and not broadcasting n since the ps3 is wireless g.

Wireless Router WRT310N/Nintendo Wii

The issue here for me is I'm trying to get my Nintendo Wii connected to my wireless router. I cannot do so without getting the passkey to my router...or at least that's what the customer service rep. says from Nintendo. There is no self help in the Linksys website so I figured I would try this.
Also in order for myself to get the passkey the rep. said I would need to login to the router's settings. It's a wireless router and has not direct connection to my computer really and had no set-up utilities that I can find on my computer. What do I do?

Hello Sir,
In such a case, you will do require to connect either One of the Pc to the router using a cable....open up Internet Explorer and in the address bar type in the web-site.. http://192.168.1.1 (default)..It will ask you for the username and password...the default password is "admin" and nothing in the password...
Once on the ui of the router...on top you will locate a tab for wireless...click on it...and right below it you will find wireless security...click on it....and that's where you will find the wep key that you are looking for..
Revert Back if you face any Issues...
Thanx

Wireless Print Server Installation Issue - HP 2101nw

I have been using the 2101nw for the past year with my HP printer and Qwest DSL (Actiontec Wireless modem / router) without any issues. Well I made the switch over to Comcast so I needed to use a new wireless router (the Linksys WRT54G). For some reason I wasn't able to get the 2101nw to work, it just wouldn't connect to my computer. So I decided to uninstall the software and reinstall it. Well that isn't working very well. Everything loads up fine while the print server is connected to my computer. The instructions then tell me to discount the cable from my computer and plug in the printer, nothing happens at all after that. No connection and the software therefore won't complete the installation. I've spent two days trying to figure out what to do, since the guide really doesn't offer any help. Any suggestions or recommendations?

Compatible products for:
HP 2101nw Wireless G Print Server (Q6301A)
Black and White Laser Printers HP LaserJet P1005 Printer HP LaserJet P1006 Printer HP LaserJet P1500 Printer series HP LaserJet P2030 Printer series HP LaserJet P2050 Printer series
Color Inkjet Printers HP Deskjet 6980 Printer series HP Deskjet D2500 Printer series HP Deskjet D4200 Printer series HP Deskjet D4300 Printer series HP Officejet Pro K5400 Printer series HP Photosmart D5300 Printer series HP Photosmart D5400 Printer series HP Photosmart D7200 Printer series HP Photosmart D7400 Printer series
Color Laser Printers HP Color LaserJet CP1210 Printer series HP Color LaserJet CP2020 Printer series
Color Multifunction and All-in-One HP Color LaserJet CM2320 Multifunction Printer series HP Deskjet F4200 All-in-One Printer series HP Officejet 6300 All-in-One Printer series HP Officejet J4500/J4600 All-in-One Printer series HP Officejet Pro L7500 All-in-One Printer series HP Officejet Pro L7600 All-in-One Printer series HP Officejet Pro L7700 All-in-One Printer series HP Photosmart C4200 All-in-One Printer series HP Photosmart C4380 All-in-One Printer series HP Photosmart C5200 All-in-One Printer series HP Photosmart C6200 All-in-One Printer series
Specialty Photo Inkjet Printers HP Photosmart A520 Printer series HP Photosmart A530 Printer series HP Photosmart A620 Printer series HP Photosmart A630 Printer series HP Photosmart A820 Home Photo Center series HP Photosmart B8550 Printer series

Infinity and wireless router issues

Hi Folks,
Thanks for taking the time to read this, if anyone has any similar issues or resolutions to the situation feel free to chip in..
We had Infinity installed a while back and noticed some intermittent connection problems, the issue was that wireless connections would suddenly loose the gateway and go offline but unusually it was always fixed by simply restarting the network adapter on the client machine, the wireless signals were always near full strength.
Later on I noticed that although the clients seemed to loose connection it actually appears to loose DNS and keeps existing connections live, example below, meaning that if you had fired up a streaming connection before the 'drop' it would continue to stream to the client perfectly although the client could not access any new connections(online).
The setup we were given on installation consisted of an Infinity wired(only) box that connects to our old wireless router which appears to be acting as a wireless bridge to the Infinity box.
Having been a BBI Tech for a well known ISP Customer Service Centre, using a process of elimination I am guessing that there is an issue between the old router and the new Infinity router that is causing conflicts to crop up.
**Example** A friend working out of the country was using a VNC client to logon to my machine as he couldn't access our DB servers from his location, he became confused when he was using my desktop and suddenly he lost online capability.... even though he was remotely logged into my machine to witness it he couldnt open any websites or connect to any DB's.
I would appreciate any input as im thinking that the best way to fix this would be to buy a new Infinity capable modem with wireless built in, but am reluctant to do so as the standard kit should work after being setup by the engineer..
In summary:-
wireless drops dns with signal full, (not a signal issue)
current connections stay open, (again not a signal issue or problem with the broadband)
cannot open any new connections, (not sure if this is dns based as cant even connect to direct ip's)
the clients have all been fine on other wireless networks, (not just tested on an individual, faulty adapter)
renewing the connection from the client fixes the issue, (something to do with lease times or bad routing maybe?)
The wireless router is one of the black homehubs.
Any help appreciated as im having to write this post using my 3G connection to ensure i dont get dropped.
Thanks
Mike

This is the setup left by the engineer...

Issues hooking a WRT350N Wireless Router to a SE587 Siemen Wireless modem

I'm having an issue with my newly both WRT350N wireless router. I had my internet hooked up today, with no problems. Rather than sending a typical modem (which might be the entire cause of the issue), they sent me a SE587 Wireless Gateway Siemen Modem. Basically i get through almost the entire installation cd for the setup of the router, when it tells me theres no internet connection, and asks me to retry while unplugging and re-plugging the modem. To no success has this resolved my issue. But here's the thing. When i hook the modem to my PC, im instanly connected, no problem there. When I hook the cables to the Router, the four solid lights come on. (Power, ETHERNET (1,2,3,4), Internet, and Wireless. So i know that the internet is there, and its getting to the router, but the connection is not making it to the PC, where i find myself with limited connectivity. Now some Telus representative was spewing that i can't have the same IP addresses on the modem and router. Fine. Now I attempted to get the internet connection through DHCP, Static IP, PPoE. And the same problem persists. For my modem the info is as follows: IPv4: 192.168.1.100 Subnet: 255.255.255.0 Default Gateway: 192.168.1.254 DNS: 192.168.1.254 When i set the settings for my router through static IP, i put the info as follows: IP address: 192.168.1.102 subnet: 255.255.255.0 default gateway: 192.168.1.254 DNS: 192.168.1.254 And i'm still in the same position. What am i doing wrong?

The siemens modems that I've encountered usually have a 192.168.1.1 or 192.168.1.254. You will need to disconnect it from the router and change the router's address to a different range (ie 192.168.2.1).
The box said windows xp or better... So I installed Linux!

ISSUE With my WRT600N Wireless Router --

Hello, I am having trouble with my Wireless Router. It is the WRT600N model Linksys Router and the issue I am specifically having is my wireless access. I have several devices which access wirelessly and am starting to have more and more issues of late, not sure why...?
I was wondering how to configure each device accessing my wireless net individually as I have Network MAgic asnd have seen a couple of the items on my network with the same ip addresses. I would like to assign a number to each device and see if that eliminates the issues I have been experiencing..?
I have looked through these question pages and have not found the answer I was looking for so I hope this has not been asked before. I also saw a post that kind of caught my interest and it was regarding using two WRT600N's routers together for better range etc. I have an issue with raqnge on my system and have an old WRT54 Router and would like to know if I could do the same thing with this and incorporate this router into my system as a wireless access point (WAP) only. If this is possible, what would the steps be to accomplish this...
My main issue I chose to writer about here was recently experienced when I got an Ipad and my Ipad has issues remaining connected to my WRT600N Router and I checked my network program and noticed that it was assigned the samw IP address as one of my boys X-Boxes. I believe currently we have approximately 9-11 devices that periodically connect wirelessly to my network. Some devices are PSP's and only occassionally connect and I have NEVER seen all the devcices connect at the same time. I believe the max at once would be approximately 5-6 devices. Is this too many at once...? Is the router overloaded with the amount of devices I have connected...?
Please let me know what you would recommend for my situation,
Darius Taylor
[email protected]

2 wireless routers can not communicate wirelessly with each other.
You need to connect cable between 2 routers and use the second wireless router as access point.
Follow this link to connect Linksys router to another router.
Some of your devices are getting same IP address. This might be the issue with DHCP server of the router. You can try DHCP reservation on the router so that each device will get unique IP address.

HT204409 I have a new iphone 5 and it won't connect to a wireless router that my old iphone 3GS would pick up. Is there a compatibility issue with some routers or is the antenna weaker in the new iphone 5?

I have a new iphone 5 and I can't pick up a wireless router that I could use with my old iphone 3GS. Is there an issue with the new iphone and is the antenna weaker than the 3GS?

Please read this :
https://discussions.apple.com/message/20053332?ac_cid=tw123456#20053332
Well I copyed it to you here.
Re: Anyone still having IOS 6 wifi issues?
created by mpa9366 in Using iPad - View the full discussion
Having done a lot of reading today and having found a very good online tablet magazine (will post link tomorrow) there seems to be a few tech bods onto the problem.
The magazine I was reading identified wifi problems within hours of the ios 6 release and have been analysing since then with almost daily updates - the story seems to be:
The apple authenthication transmission is normal, it should slip through event prior to a full handshake with the host network being completed - however if not authenthicated then apple will not permit the device to connect (kills the connection) this is designed to protect apple from counterfeiting. So thats problem 1 if you dont receive a token from apple.
Problem 2 is that ios 6 only supports ipv6 (the new ip protocol) whereas outside silicon valley a large proportion of routers modems etc are still ipv4 protocol.
So youre locked into ipv6 in a world where ipv4 devices are everywhere and apple have not allowed for the ability to handle both protocols. This is like GM telling you your car requires an upgrade, everything will improve etc and as part of the upgrade fits a fuel cell motor and stays silent when their upgraded vehicles are simply parked up because they cannot get fuel.
A very basic expectation would have been dual protocol handling - we know the HW supports ipv4 as all wad fine on ios5.
So its going to be hit and miss with networks - more hit than miss in techy areas like silicon valley, but more miss in places like where I am - a small town in rural Switzerland.
Only apple can fix this with a patch to enable ipv4 protocol handling.
There you go. you just need to buy a new router, I'm sure Apple has one for sale, cause it's not there fault for sure.
Wonder why people start to migrate to other devices ?

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

Mail and Wireless Router issue?

Hi,
I recently switched from a Linksys router which had no wireless capability to a Beklin N+ wireless router. When I received mail (Gmail) in Mail through my old Linksys, it would arrive with little to no delay. However, now when I receive email through the Belkin router, I get a substantial delay: a message could take 20 minutes to arrive in Apple Mail. For example, a message may be sent at 1 PM, and I'll receive it in my inbox in my web browser at 1 PM. However, Apple Mail won't retrieve the message for another 15-20 minutes. (Mail checks for messages every 5 minutes.) Changing the setting in the "Check for new mail" button from 5 minutes to every minute doesn't seem to help.
How can I fix this so that I can receive my email with less delay? Are there settings that I can change on the Network control panel l of my Mac?
I hope you can help. Thanks.
David

After further investigation, I think I may have found the issue: Apple Mail separates the general Inbox for "Mailboxes" and my Gmail inbox - they aren't reconciled.

Wireless Router issues with MacBook Pro and Windows XP laptops

hello,
I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

Wireless Router Installation CD won't open

Trying to install a netgear WPN 824 wireless router on my Imac 17, the installation disk won't open. I am installing the router for use with a PC laptop.
Thanks

You probably don't need the CD. Just plug a network cable (should have come with the router) from your Mac to the router. Use one of the numbered ports.
Then open up your browser (Safari, Firefox, etc...), you'll get an error message that page could not load, or something like that.
Depending on the router, you might have to look at the quick, guide, type in the default IP address of the router in the address line. Example: 192.168.0.1 -or- 192.168.1.1
It will then take you to a Netgear page, and the Wizard should start for you.
Hope that helps a little,
AL

HT1595 Wireless router sysnc issues

I have the latest Apple TV. Why do I have to reset my wireless router almost all the time when I turn on Airplay. My wiress has been flawless for a year until i recenly hooked up apple TV. Cisco Linksys E4200. It seems to make my wirlels network go haywire. My IPAD sugnal goes in out at this time. This is never an issue. I checked the wirless on my phone, IPOD, and playstation, and all go in an out until I it the reset button on my wirelss router. Why this is a pain in the *** as it is up stairs.

Then this problem, does not sound related to changing your router at all. Have you checked that the power lead is properly pushed into the Apple TV and that you are selecting the correct channel for HDMI on the TV itself.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p (Apple TV 2)
Try the Apple TV with another TV

Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit). When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number. This model doesn't show one. Any thoughts?
Thanks!

Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

Wireless router wrt310n v2 installation issue

Similar Messages

Maybe you are looking for