Wireless Router WRT54G Setup without CD - Having problems with manual setup

Hi. I have a WRT54G wireless router that I haven't used in years because my old cable provider supplied me with a router. I recently switched cable providers & they don't provide a wireless routers. I would like to use my WRT54G router, but I don't have the cd. I figured it wasn't a problem because I can just do a manual setup using the ip address 192.168.1.1. I receive the pop up window to enter the user name & password. I follow the instructions & just type in the password field the word admin & l left the user name blank but it doesn't work. Can someone please help? I know that I can fix this problem. It doesn't make sense to spend money for another router when this can be a simple fix. Thanks in advance for your help.
Solved!
Go to Solution.

I agree to sabretooth, you must do a reset on the router. You must have setup a password before to access the router page. Resetting the router will reset it's settings to the factory default settings. Push and hold the reset button for 30seconds then power it off for 10-15seconds. Once the power light goes solid, go ahead and reconfigure your router. This link should help you: Setting up a Linksys router with Cable Internet service

Similar Messages

HT4623 having problems with ios7 setup

downloaded ios 7, trying to set it up and i get connect to itunes part and then get a message on my computer saying there is a problem with my phone and visit the services centre but nothing has worked

Maybe you should try doing what the message says...

Recently bought an LG 3D tv and an LG 3d Blue Ray player but am having problems with my setup

I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all. My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of. My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all. The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all. I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound. When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?
Solved!
Go to Solution.

tomc1965 wrote:
I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all.
My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of.
My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all.
The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all.
I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound.
When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?

I have a problem with my wireless router wrt54g. 360 help

So, let me explain my setup.
wireless router wrt54g has 1 wire connecing a home computer to the internet
Laptop is wireless
I tried connecting my 360 to my laptop (with a wire) and having a shared internet connection so that i could connect to the internet.
YET! when i connect my 360 to my laptop, it dissconnects MY LAPTOP from the internet. Weird phenomenon i know.
ALSO
whats nat? When i connect with a ethernet cable, it says this when i try to join a game

this video was able to help me out
http://www.youtube.com/watch?v=6NIyo2kJEG4

I am having problems with connecting to my router wireles...

I am having problems with connecting to my router wirelessly. How do I determine my access point's network key?

Follow this from a computer already connected: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. 2. Go to wireless tab. 3. Go to wireless security sub-tab. 4. If security mode is wpa or wpa2 note down pass phrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key.

I need Help Setting Up Wireless Router WRT54G on NTL

Hi, I've managed to setup a few home wireless networks in my time but I'm having problems with this. My gf's ISP is NTL and it is connected via a cable modem (rather than the set top). I registered my laptop using the installation software and the internet connection is working fine. I attempted to setup the router and I could connect to it, however I could not connect to the internet through the router. Previously with other routers I found an option where you could input the user/pass so that the router was automatically connected to the service, but I could not find this option. Does anyone who has setup this wireless router with an NTL setup / or anyone at all have any idea how I go about setting it all up?
Thanks in advance

I also found this thread which helps by showing when to clone the MAC address.
Using run cmd from XP's start menu and typing ipconfig /all will show the MAC address of your machine's NIC card, if you need it.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=1040&p_created=10869...

Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
Need help to get this problem resolved
Thanks
Rohit

Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
Click on wireless tab ....change the channel to 11 .....click save settings ....
Go to advance wireless settings subtab ....
Beacon interval 75
RTS & Fragmentation threshold 2306...... click save settings ...
Click on status check Ip address & firmware version on the same & let me know ...

Linksys Wireless Router: WRT54G Version: 2

I was just curious, since I have been talking to someone about the Linksys Routers and they were saying that WRT54G Versions 3, 4 & 5, all work successfully. Then when I asked him about Version 2, he said that he THINKS that the router will work.
Can someone please give me an answer: Will the Linksys Wireless Router: WRT54G Version: 2 work with a MacBook Pro?!

I get from 3 to 6 Mbps wireless and wired, which is considerably slower than my other Windows-based desktop and notebook over my 30 Mbps cable connection. My Dell notebook and desktop consistently get 15 Mbps wireless and 22 to 28 Mbps wired. Mac OS is relatively new to me, so I haven't had a chance to read as much I need to about optimizing connection speeds. But, I can either fix it by optimizing it, or perhaps Apple will come out with a firmware update since some people have been complaining about slow connections speeds and dropping connections.
In my work, I have several computers going at the same time, and for typical Web surfing, I see no difference in speed between the 6 Mps on the Mac and the 15 Mpbs on the Dell---it's really limited anyway by the Web site server. I do notice a difference in download times, but even for very large files, the difference is noticeable but not a problem. And, there has never been a problem streaming video or downloading trailers, etc.
Of course, only five years ago, my cable connection was first 128 Kbps (which was high speed then), then they jumped it up 1 Mpbs, then 10 Mbps, and now 30 Mbps---so the 6 Mbps on the Mac still seems pretty fast to me.
Speed will always be slower over the wireless compared to your Ethernet connection, but once you get speeds in excess of 1 Mbps, you only see the difference in download times, surfing is the same.
MacBook, MacBook Pro, Mac Mini PPC Mac OS X (10.4.7) Dell D500 and GX620 with Windows XP Pro

Lost IP access to Linksys wireless router WRT54GS v.4. How to restore?

Apologies for the long post and multiple questions. If you can answer at least one of them, I will be appreciative!
While attempting to set-up wireless networking between my new Westell Model 6100G and Linksys wireless router WRT54GS v.4 (with most recent upgraded firmware), I lost access to the Linksys. When I hooked up the Linksys again via Ethernet to my XP PC with the modem no longer connected, I was unable to access it via IP 192.168.1.1. All I get is a blank web browser page (with the usual “diagnose, etc.” button). I assumed this is because the IP address conflicts with IP for the Westell, but I am also concerned if it is hardware failure. I have tried resetting the router, but no luck. I have tried ipconfig /all which gave me a different ip address. But when I tried to access the Linksys using this ip address, I was unsuccessful. I hooked up the router to a different pc with no present Internet access and tried IP 192.168.1.1, but still no luck. Trying the IP I got from ipconfig /all at this new pc failed as well.
Is there a chance I have a hardware failure? I had access last night when the linksys was at its original location (I only checked it once before turning in), but I seem to have lost access ever since I moved it closer to my desk and to a new electrical outlet. When turned on, the Linksys has green lights in the right places, so it looks fine, but, again, no access via IP.
If it’s not hardware failure, how do I find out what IP address the Linksys actually uses now if it is no longer 192.168.1.1? Or how do I change it?
Is a WRT54GS v.4 worth the trouble or should I start over and upgrade to a newer router?
Is Linksys the best choice with the Westell 6100G? The configuration procedures seem very complicated compared to my ease of router/modem configuring in the past.
Solved!
Go to Solution.

"_when I setup the Westell modem in bridge mode, will I lose my Internet connection?_ "
Answering my own question: "yes."
I found what looks like a good step-by-step guide to hooking up a Westell 6100 to a Linksys
router at:
http://www.dslreports.com/faq/vz/4._Hardware#13600
It provides more detail and up-to-date illustrations than Verizon's instructions at
https://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/QuestionsOne/87126.htm
(which appear to be for an earlier version of the Westell 6100), although they are otherwise similar. The DSLreports faq confirms that Internet and IP access to the modem will be lost during the setup phase. For a "newbie" at such linking, this bit of information is very helpful!
Thank you, Telcoguru, for confirming that I should have followed the instructions exactly from beginning to end before becoming concerned and skipping steps.
I will close this thread and wait for a long lazy day, to try linking the Westell and the Linksys again. If I need to post again, it will hopefully be with more specific questions about specific steps that haven't worked as they should.

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.us there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PCM anymore.

Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.is there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PC anymore.i reset my pc and save my iTunes to a hard drive but can't access it.Need help please

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

TS3899 I HAVE IPAD AIR HAVING PROBLEMS WITH EMAIL DELETING AFTER A SHORT TIME WITHOUT COMMAND CAN YOU HELP

Q. I have an IPAD air having problems with my email deleting after a short while without command.

I've had issues like this before.
I ended up having to call my provide to reset the connection, which worked for a while, then quit. i then took it into my provider for a new sim card and had the connection re-established again. I haven't had issues since.
hopefully for you resetting the connection with your provider will do the trick and a new SIM card wont be nessesary.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

I need to limit the range of my wireless router WRT54G - Any ideas are appreciated.

I need to limit the range of my wireless router WRT54G - Any ideas are appreciated. I don't want to put on a password if I can avoid it. Thanks for you advice in advance. Milwaukie

Trying to confine a wireless signal to your home is not a practical solution to security concerns. The distance that a wireless signal will travel is mainly limited by the receiving antena and sensitivity of the receiver. An ordinary wireless receiver can probably pick up your signal for 200 to 1000 feet. A great receiver could probably pick up your signal from a mile or more. The best alternatives are:
a) convert your system to a wired system, or,
b) encrypt your wireless using a good encryption method (WPA or preferably WPA2) and use a strong password.

Wireless Router WRT54G and VPN RV042

Respected member please help if u can! I have a ADSL with dynamic connected with wireless router wrt54g , i recently bought RV042 and want to connect wire coming from wireless with ports. so basically, i want to use RV042VPN using after router, is there a way i can use vpn behind wireless with port router using RV042
i cannot be able to establish connect in vpn because it not seeking any ip neither WAN/LAN.
Solved!
Go to Solution.

If you are getting a public ip address from the ADSL device then connect RV042 to the AdSL device and then configure the settings for wrt54g connected to RV042.with DHCP disbled and connected from LAN on RV to lan On WRT.

Still having problems with wireless connections with the new lions os

is anyone else still having problems with there wireless connections on the new lions os? What a poor job apple did

No.

Wireless Router WRT54G Setup without CD - Having problems with manual setup

Similar Messages

Maybe you are looking for