Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
Need help to get this problem resolved
Thanks
Rohit

Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
Click on wireless tab ....change the channel to 11 .....click save settings ....
Go to advance wireless settings subtab ....
Beacon interval 75
RTS & Fragmentation threshold 2306...... click save settings ...
Click on status check Ip address & firmware version on the same & let me know ...

Similar Messages

Linksys Wireless Router: WRT54G Version: 2

I was just curious, since I have been talking to someone about the Linksys Routers and they were saying that WRT54G Versions 3, 4 & 5, all work successfully. Then when I asked him about Version 2, he said that he THINKS that the router will work.
Can someone please give me an answer: Will the Linksys Wireless Router: WRT54G Version: 2 work with a MacBook Pro?!

I get from 3 to 6 Mbps wireless and wired, which is considerably slower than my other Windows-based desktop and notebook over my 30 Mbps cable connection. My Dell notebook and desktop consistently get 15 Mbps wireless and 22 to 28 Mbps wired. Mac OS is relatively new to me, so I haven't had a chance to read as much I need to about optimizing connection speeds. But, I can either fix it by optimizing it, or perhaps Apple will come out with a firmware update since some people have been complaining about slow connections speeds and dropping connections.
In my work, I have several computers going at the same time, and for typical Web surfing, I see no difference in speed between the 6 Mps on the Mac and the 15 Mpbs on the Dell---it's really limited anyway by the Web site server. I do notice a difference in download times, but even for very large files, the difference is noticeable but not a problem. And, there has never been a problem streaming video or downloading trailers, etc.
Of course, only five years ago, my cable connection was first 128 Kbps (which was high speed then), then they jumped it up 1 Mpbs, then 10 Mbps, and now 30 Mbps---so the 6 Mbps on the Mac still seems pretty fast to me.
Speed will always be slower over the wireless compared to your Ethernet connection, but once you get speeds in excess of 1 Mbps, you only see the difference in download times, surfing is the same.
MacBook, MacBook Pro, Mac Mini PPC Mac OS X (10.4.7) Dell D500 and GX620 with Windows XP Pro

Linksys Wireless Router WRT54G Version 3

I just purchsed and installed a Linksys Wireless Router WRT54G Version 3. It works great in my somewhat small ranch type house. I'm presently just using it so I can wireless access the internet with my Dell notebook computer from any room in my house. My operating system is Windows XP. If I decide to upgrade to Windows Vista in the future will my Linksys Wireless Router WRT54G Version 3 still work ok?
Frank

yes, i think it will work... just make sure that the firmware of your router is up-to-date with the latest releases from linksys... you can check it out at http://www.linksys.com/downloads and just choose the model no. and version of your router... also, try to check the knowledge base website at http://www.linksys.com/kb ... i hope this helps... good luck buddy
♥ Registered TradeMark Since 1987 ♥

I recently added a wireless router and now am unable to get to the internet through Firefox.

When I laucnch Firefox I get the following message: Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
This problem can sometimes be caused by disabling or refusing to accept
cookies.
Do I have to do something else now that I added the wireless router?

From a previous post:
Clear the Cookies for the Specific Site or Page you are having the problem connecting to - or if no sites will load, Clear All Cookies: http://support.mozilla.com/en-US/kb/Deleting%20cookies?s=clear+cookies&r=1&as=s

HI I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7. NOW I W...

HI
I HAVE WRT54G WIRELESS ROUTER WITH VERSION 7.
NOW I WANTED TO UPGRADE THE FIRMWARE.
I CHCAKED OUT THE SITE I COULD'NT FIND THE DRIVERS FOR THE VER 7
EVERYTHING ELSE OTHER THAN VER 7 IS PRESENT ON SITE I WANTED TO CHEAK OUT WHEATHER THE VER 7 FIRMWARE ARE AVALIABLE OR NOT PLEASE HELP ME TO DO SO
THANKS
PRAVIN

hi helm
Thanks a lot for your suggestion i got the required farmware
thanks
prav

Lost IP access to Linksys wireless router WRT54GS v.4. How to restore?

Apologies for the long post and multiple questions. If you can answer at least one of them, I will be appreciative!
While attempting to set-up wireless networking between my new Westell Model 6100G and Linksys wireless router WRT54GS v.4 (with most recent upgraded firmware), I lost access to the Linksys. When I hooked up the Linksys again via Ethernet to my XP PC with the modem no longer connected, I was unable to access it via IP 192.168.1.1. All I get is a blank web browser page (with the usual “diagnose, etc.” button). I assumed this is because the IP address conflicts with IP for the Westell, but I am also concerned if it is hardware failure. I have tried resetting the router, but no luck. I have tried ipconfig /all which gave me a different ip address. But when I tried to access the Linksys using this ip address, I was unsuccessful. I hooked up the router to a different pc with no present Internet access and tried IP 192.168.1.1, but still no luck. Trying the IP I got from ipconfig /all at this new pc failed as well.
Is there a chance I have a hardware failure? I had access last night when the linksys was at its original location (I only checked it once before turning in), but I seem to have lost access ever since I moved it closer to my desk and to a new electrical outlet. When turned on, the Linksys has green lights in the right places, so it looks fine, but, again, no access via IP.
If it’s not hardware failure, how do I find out what IP address the Linksys actually uses now if it is no longer 192.168.1.1? Or how do I change it?
Is a WRT54GS v.4 worth the trouble or should I start over and upgrade to a newer router?
Is Linksys the best choice with the Westell 6100G? The configuration procedures seem very complicated compared to my ease of router/modem configuring in the past.
Solved!
Go to Solution.

"_when I setup the Westell modem in bridge mode, will I lose my Internet connection?_ "
Answering my own question: "yes."
I found what looks like a good step-by-step guide to hooking up a Westell 6100 to a Linksys
router at:
http://www.dslreports.com/faq/vz/4._Hardware#13600
It provides more detail and up-to-date illustrations than Verizon's instructions at
https://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/QuestionsOne/87126.htm
(which appear to be for an earlier version of the Westell 6100), although they are otherwise similar. The DSLreports faq confirms that Internet and IP access to the modem will be lost during the setup phase. For a "newbie" at such linking, this bit of information is very helpful!
Thank you, Telcoguru, for confirming that I should have followed the instructions exactly from beginning to end before becoming concerned and skipping steps.
I will close this thread and wait for a long lazy day, to try linking the Westell and the Linksys again. If I need to post again, it will hopefully be with more specific questions about specific steps that haven't worked as they should.

Wireless Router WRT54G and VPN RV042

Respected member please help if u can! I have a ADSL with dynamic connected with wireless router wrt54g , i recently bought RV042 and want to connect wire coming from wireless with ports. so basically, i want to use RV042VPN using after router, is there a way i can use vpn behind wireless with port router using RV042
i cannot be able to establish connect in vpn because it not seeking any ip neither WAN/LAN.
Solved!
Go to Solution.

If you are getting a public ip address from the ADSL device then connect RV042 to the AdSL device and then configure the settings for wrt54g connected to RV042.with DHCP disbled and connected from LAN on RV to lan On WRT.

I have a problem with my wireless router wrt54g. 360 help

So, let me explain my setup.
wireless router wrt54g has 1 wire connecing a home computer to the internet
Laptop is wireless
I tried connecting my 360 to my laptop (with a wire) and having a shared internet connection so that i could connect to the internet.
YET! when i connect my 360 to my laptop, it dissconnects MY LAPTOP from the internet. Weird phenomenon i know.
ALSO
whats nat? When i connect with a ethernet cable, it says this when i try to join a game

this video was able to help me out
http://www.youtube.com/watch?v=6NIyo2kJEG4

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I need to limit the range of my wireless router WRT54G - Any ideas are appreciated.

I need to limit the range of my wireless router WRT54G - Any ideas are appreciated. I don't want to put on a password if I can avoid it. Thanks for you advice in advance. Milwaukie

Trying to confine a wireless signal to your home is not a practical solution to security concerns. The distance that a wireless signal will travel is mainly limited by the receiving antena and sensitivity of the receiver. An ordinary wireless receiver can probably pick up your signal for 200 to 1000 feet. A great receiver could probably pick up your signal from a mile or more. The best alternatives are:
a) convert your system to a wired system, or,
b) encrypt your wireless using a good encryption method (WPA or preferably WPA2) and use a strong password.

I have an Airport Extreme wireless router & I can not connect my Kindle.

I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.

If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
,but that is not helping.kindly provide me the guidance.
when i searched in internet i am able to see many people are struggling with this same issue .

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

Problem with Virtual PC and Network Connection - VPC gets disconnected

Hi,
I've been having a few problems with a virtual computer and its network connection. I've set up a few computers the same way over the years and they all work fine except this one. We use the Virtual PC and XP mode to access our data from an older
program. The databases are on a server, which are accessed as a mapped drive. Every once in a while (with no particular pattern, sometimes it doesn't happen all day, sometimes it happens every 5 mins), the VPC gets disconnected from the network,
my program returns a file read error and then everything is frozen. When I try to ipconfig/release and renew, it releases correctly then it won't renew. I need to shut down the VPC from the Win7 task manager and even so, it doesn't shut it down,
even when I try to kill the vpc process. The only way it'll come back up is if I restart the computer. The network connection on the Win7 computer doesn't do that.
Is there anything I can do to fix this ?
Thanks,
Melanie

Hi,
Does it become more stable now, actually, I'm afraid that this issue is not related with the drive letter or name. Since you're using bridge mode, the I would suggest you use NAT as a test, it is the default network configuration, which allows the VM
to leverage the external TCP/IP network connected to the host. This is very useful if you regularly move the host computer between different network configurations. NAT is the preferred networking option when there is a shortage of IP addresses, a need to
ensure the VM’s IP address is not targetable from an external network, or a need for connecting using WWAN.
Yolanda Zhu
TechNet Community Support

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

Morning Indrajit Chatterjee,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Best of luck,
Mario

Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

Similar Messages

Maybe you are looking for