Wireless says windows cant control this device
I am using boot camp with windows xp sp2 i loaded the drivers from the apple disk but whenever i try to select a wireless network it comes up saying that windows cant control the wireless device, and references wireless zero config. I have tried to start this service per Microsoft's instruction but every time I get a error message saying "Error 1075: The dependency service does not exist or has been marked for deletion." I have searched trying to figure out how to solve this problem but havent come across anything. Can someone out there help me?
i am having the same problem on my mac pro when i try to use the airport card to connect to the wireless network in my house. I was using a Hawking wireless G USB adapter that worked fine on the windows partition nut would cause kernal panics in OSX. Hopefully someone can help us out because it is very frustrating.
Similar Messages
-
please help...
my computer is not recognizing my ipod classic gen 5. it shows the sad face then i did the basic troubleshooting until logo comes out...
still my computer is not recognizing my ipod.. it still says "Windows has stopped this device because it has reported problems. (Code 43)"See here: iPod displays a sad iPod icon
Note that it's often a good sign of a hardware issue with the iPod's hard drive meaning the iPod will need to be serviced or replaced.
B-rock -
""windows has stopped this device because it has reported problems. (code 43)"" it says this when i connect my iphone4 to my laptop, and the phone is stuck in recovery mode, wat can i do???
Read http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/code-43-wind ows-has-stopped-this-device-because-it/b9cf1b3e-2b71-4b54-adc6-2dda9c73cd5a
-
My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.
Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2 -
ipod nano(6th generation) it is not recognised in itunes.. it says it cannot recognise this device completely..try unistalling and re-install itunes.. i did but it still doesnt.. even my ipad is not recognised in itunes,.. wat shall i do ..pls help me ...
Did you uninstall iTunes and all other Apple related software using the instructions in this Apple support document?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
B-rock -
Everytime i go to watch a video on youtube, weather it be the mobile site, desktop version or the app, it always says 'video unavailable on this device' this only started happening in the last few weeks! Can someone help???
Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video. -
hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit
This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
But aren't Macs supposed to "Just Work"? Not in this case. -
it says i must authorized this device before i can sync purchased albums to my nano
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
Also see, iTunes Store- Authorize or deauthorize your Mac or PC -
I have a workstation with following configurations:
Display adapter NVIDIA Quadra K4000
OS: Windows Server 2012 Standard (64 bit)
Hyper-V virtual GPU: NVIDIA K4000
Hyper-V VM 1: Windows 8 Enterprise 32 bit
Hyper-V VM 2: Windows 8.1 Enterprise 64 bit
Both the 2 VMs above has the RemoteFX video adapter added and are supposed to have RemoteFX display working.
However it only works in the VM 1 (Windows 8). In the VM 2 (Windows 8.1) the display adapter (Microsoft RemoteFX Graphics Device - WDDM) is reported "Windows has stopped this device because it has reported problems (Code 43)"
Anyone ever experienced a similar issue?
Much appreciated :)
Hi leon,
I am currently standing by for an update from you and would like to know how things are going on your end. Should you have any questions or concerns with the
suggestions I provided, please don't hesitate to let me know.
Regards,
Kelvin hsu
TechNet Community Support -
Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solvedFolling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
HT1386 Windows has stopped this device because it has reported problems. (Code 43)
Windows has stopped this device because it has reported problems. (Code 43)
When I try to sync to windows 7 machine has been synced before.Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43)
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43) what does it mean
-
HT4236 Windows has stopped this device because it has reported problems. (Code 43)
Cpu does not recognize the IPod Nano Gen6 since upgrading to new device and getting this error code...Windows has stopped this device because it has reported problems. (Code 43). I have even uninstalled and reinstalled ITunes...still no joy. Suggestions please??
Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
I just downloaded Snow Leopard to my Mac Book, now my ICalendar says I cant use this version of iCal with this version of Mac OS X, i currently have ICal 3.0.8.....what do i need to do?
Your profile shows you are running Snow Leopard. Put the Safari version you now have into the Trash. You need to reinstall Snow Leopard.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
i downloaded a movie and i tried to put it on my ipod touch but itunes said " itunes cant put this on your ipod touch and error has occured" any help? thanks!
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
Maybe you are looking for
-
Problem with firmware in a Zen Jukebox 3
Well, I've got a mp3 player, a Creative Zen Jukebox with a HD of 30GB. The other day I started it and it began to re-built the music library, but it blocks in the middle of the process and shows a message: firmware problem. And here it sto ps. I can
-
With the older version I was able to print a playlist of 24 songs that would fit on a case. The print was single-spaced on the older version, but on this version, the print is double spaced and it no longer fits on a case. Does anyone have an answe
-
Workflow Manager 1.0 with SharePoint 2013
Hi Guys, I understand as per below link that minimum three servers are required to provide high availability for Workflow Manager 1.0 in SharePoint 2013. http://blogs.msdn.com/b/sanjaynarang/archive/2013/04/06/sizing-and-capacity-planning-for-sharepo
-
Hi ALL! How can I show a form (created by wizard) with record returned by query? To Kelly Cox ([email protected]): You wrote earlier: "There are a couple of posts in the 9iAS Portal Applications Forum that address this requirement. --Kelly" I still h
-
Error Msg: "The application iTunes can't be opened. -1712" How can I open the application?
Error Msg: "The application iTunes can't be opened. -1712" Spinning Wheel from ****! How can I open this application?