Wireless security compability issue with Win 7? Help!
I was able to upgrade my wireless router and reset the configuration. However, it looks like Win 7 doesn't support WEP or any other security key......I can use wireless Internet when no security key is added. However, my wireless internet turns into "Limited Access" when I added WEP key......any thoughts on this?
Thanks,
As vai_fan and sabertooth has mentioned, BEFW11S4 is not compatible with Windows 7. So its time to buy a new Router. So i think this Christmas you need to gift yourself a New Router
Similar Messages
-
I have a SB X-fi Xtreme unit in my system. It was running XPsp3 and ran just fine. Upgraded to Win 7 home premium. Now some video files have issues with the sound tracks but music seems to be okay. Itunes seems to play my music just fine (although a couple of things may be boarderline - hearing sux LOL). I can't narrow it down to any particular video type since it happens on FLV, MPG, MOV and other extensions. VLC and MS MP both show these issues. Playing stuff on Youtube and elsewhere acts up. I am running the creative 8/3 release 5.2..208. I went to the website and tried the dri've upgrade available ?but it errors out saying that it does not find a device. I also installed various codecs since I figured that might be a cause. Any help is welcome. BTW I am running 32bit.
EDIT
I have also downloaded both:
XFXA_PCDRV_LB__04_0000.exe and
XFXA_PCDRV_LB__04_0090.exe
version 0000 gives me a message that it'scould not find a?device type?error and closes
version 0090 didn't complete (I waited 5 minutes and there was no disk activity - task manager said it was working) under normal mode
I then ran 0090 under XP sp3?compatibility and got a 'driver not found' error.CS2 is totally unsupported under Win 7. And if you have 6 gigs of RAM I'll guess that it's a 64 bit system which simply adds to the complexity.
Sorry, but the best advice you'll get is to upgrade.
Bob -
USB 2.0 issue with sleep mode--help!
hey there,
so i've searched this forum's board and found that it seems quite a few people have had issues with USB 2.0 and sleep mode on the mac. most of what i read, however, comes from people not being able to put the computer to sleep once new USB 2.0 cards or devices are installed. that is not the problemm I seem to be having, but is this:
I recently purchased a Belkin USB 2.0 PCI card, and installed it on my MAC G4 tower. It seemed to work ok for a little while, but then i noticed that AFTER i put the computer to sleep, when it 'awakens' from slumber, it no longer reads the USB devices. if the device was plugged in prior to sleep mode, it sometimes reads ok. but if I try and plug in a new USB device, such as an iPod or flash drive, no dice. it doesn't mount on the Mac.
I called Belkin tech support, and they were very helpful, but told me that the macs have had issues powering the USB PCI card once the computer is in sleep mode. they even directed me to an apple support page that has downloads that seem to address this, but they're for 10.0-10.0.4. I don't want to download that onto my mac (10.3.9) cuz im worried it might screw something up on my OS.
I would LOVE a download link for a software updater for this if someone knows where it is, otherwise, I may have to return this thing to Belkin and go with a more mac-friendly brand. so im open to that possibility, too.
any help would be GREATLY appreciated!!
cheers,
the quid pro
Power Mac G4 Mac OS X (10.3.9) Dual 1Ghz, 1.5 GB SDRAMI would either complain to Belkin for a fix if there is one or return the card and try a different one. You should not have the problem, but Belkin USB hubs and cards appear to have more problems like yours than other manufacturers' products.
You might try Sonnet's Tango FW400/USB 2.0 multi-card, for example, or Firewire Direct's 6-port FW800/USB 2.0 card.
You may also want to check this page for some user reports on related products. -
Image Gallery issues with Lightbox2 - please help!
Hello there,
I am using Lightbox2 image gallery. The loading.gif and close.gif aren't showing up and I think there's an issue with the path in the lightbox.js file. The loading and close gifs are located in the Images gallery so I changed the path in the lightbox.js file accordingly - I've gone through this many many times but they are still not showing up.
Can anyone please help me?
My website is: www.labellepetraie.com
Here's where I downloaded the script from: http://www.huddletogether.com/projects/lightbox2/#how
I have tried all the path combinations mentioned in their forum but to no avail. What am I doing wrong?
Thank you for any help you can offer to me.
Regards!Interesting. I've just looked at your scripts, and it would appear that you have blended two versions of lightbox2 on your page,. Is that possible? The lightbox.js file has no function called initLightbox() in it, whereas older versions do. So, try changing this:
window.onload = function(){ // use this instead of <body onload …>
MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
initLightbox();
to this:
window.onload = function(){ // use this instead of <body onload …>
MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
//initLightbox();
to see if that works. I think so. Turns out the initLightbox() function call that we activated by fixing the code before is no longer needed by the lightbox2 script as of v2.04! I see that it still tells you to put that function call in the body tag, but i think that is wrong (which is very weird to say, can I really be right???). If you look at the example page online you'll see that he uses this body tag:
<body>
and there are no onload's anywhere.
Let me know.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
Consistent windows errors and installation issues with win 7
I am experiencing repeated blue screen errors (bad pool error and failed to clock interrupt among others) and now have issues with enabling windows firewall (error 8007042c) among various other windows errors also windows restore is not working would appreciate
any advice thank you.Hi,
Please refer to this KB to troubleshoot the windows firewall (error 8007042c), begin with scanning for malware.
http://support.microsoft.com/kb/2530126
Regarding to the blue screen, I sugegst you keep Windows up-to-date, install latest drivers, if this doesn't help, please upload the latest dump files to a public location like OneDrive, then paste the downlaod link here for further analysis. (default location:
%SystemRoot%\MEMORY.DMP or minidump)
http://windows.microsoft.com/en-in/onedrive/share-file-folder
Yolanda Zhu
TechNet Community Support -
Installation Issues with Win XP
Hi, how are all of you? I am having installation issues with
Windows XP. Every time I double click the Adobe Air installer, it
says, "Installer encounters an error and need to be close"
I have tried on three different PC. All giving same error. I
downloaded the installer many time from adobe site but nothing
works.
Windows XP SP2
512MB RAM
Pentium IV 2.4 GHz Processor
Any suggestion or help will be greatly appreciated.
Thanks,
.:.WAHABHello Tzeng, thank you for your reply. I could not get to the
log file you mentioned in your reply but here is file generated
when I get the error:
FILE LOCATION
F:\DOCUME~1\DUR-E-~1\LOCALS~1\Temp\c022_appcompat.txt
<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="Adobe AIR Installer.exe"
FILTER="GRABMI_FILTER_PRIVACY">
<MATCHING_FILE NAME="Adobe AIR Installer.exe"
SIZE="42304" CHECKSUM="0xAC3BF086" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="setup.exe" INTERNAL_NAME="setup.exe"
LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x13891"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:35:52" UPTO_LINK_DATE="02/12/2009 19:35:52" />
<MATCHING_FILE NAME="AdobeAIRInstaller.exe"
SIZE="15739760" CHECKSUM="0xA9D06949" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="Adobe AIR Installer.exe" INTERNAL_NAME="Adobe
AIR Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems
Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF1128F"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:35:39" UPTO_LINK_DATE="02/12/2009 19:35:39" />
<MATCHING_FILE NAME="flashplayer_9_plugin_debug.exe"
SIZE="1786846" CHECKSUM="0x2FE8A8E1" BIN_FILE_VERSION="9.0.159.0"
BIN_PRODUCT_VERSION="9.0.159.0" PRODUCT_VERSION="9.0.159.0"
FILE_DESCRIPTION="Adobe® Flash® Player Plugin Installer"
COMPANY_NAME="Adobe Systems Incorporated" PRODUCT_NAME="Adobe®
Flash® Player Plugin" FILE_VERSION="1.0.20"
LEGAL_COPYRIGHT="Copyright © 1996-2009 Adobe Systems
Incorporated and its licensors. All Rights Reserved."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x18FD8B"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="9.0.159.0"
UPTO_BIN_PRODUCT_VERSION="9.0.159.0" LINK_DATE="01/13/2007
18:28:10" UPTO_LINK_DATE="01/13/2007 18:28:10"
VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="setup.msi" SIZE="30720"
CHECKSUM="0xF9521F1C" />
<MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe AIR
Application Installer.exe" SIZE="67392" CHECKSUM="0x78783101"
BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR Application
Installer" COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe
AIR 1.5.1" FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR
Application Installer.exe" INTERNAL_NAME="Adobe AIR Application
Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x145F9"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:34:43" UPTO_LINK_DATE="02/12/2009 19:34:43" />
<MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe
AIR.dll" SIZE="7876928" CHECKSUM="0x7F6C1C4D"
BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR"
COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe AIR 1.5.1"
FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR.dll"
INTERNAL_NAME="Adobe AIR.dll" LEGAL_COPYRIGHT="Copyright 2009,
Adobe Systems Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0"
VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32"
PE_CHECKSUM="0x789021" LINKER_VERSION="0x0"
UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
<MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
CS3\Setup.exe" SIZE="2685104" CHECKSUM="0x7309F0C8"
BIN_FILE_VERSION="1.0.135.0" BIN_PRODUCT_VERSION="1.0.135.0"
PRODUCT_VERSION="1,0,135,0" FILE_DESCRIPTION="Adobe Setup"
COMPANY_NAME="Adobe Systems, Copyright 2005-2007"
PRODUCT_NAME="Adobe Setup" FILE_VERSION="1,0,135,0"
ORIGINAL_FILENAME="Setup.exe" INTERNAL_NAME="Setup.exe"
LEGAL_COPYRIGHT="Adobe Systems, Copyright 2005-2007. All rights
reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x298CDB"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.0.135.0"
UPTO_BIN_PRODUCT_VERSION="1.0.135.0" LINK_DATE="03/16/2007
23:30:15" UPTO_LINK_DATE="03/16/2007 23:30:15"
VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
CS3\WinBootstrapper.msi" SIZE="1823744" CHECKSUM="0x88506662" />
</EXE>
<EXE NAME="Adobe AIR.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="Adobe AIR.dll" SIZE="7876928"
CHECKSUM="0x7F6C1C4D" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR" COMPANY_NAME="Adobe Systems Inc."
PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="Adobe AIR.dll" INTERNAL_NAME="Adobe AIR.dll"
LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x789021"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
</EXE>
<EXE NAME="kernel32.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="983552"
CHECKSUM="0x4CE79457" BIN_FILE_VERSION="5.1.2600.2180"
BIN_PRODUCT_VERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180"
FILE_DESCRIPTION="Windows NT BASE API Client DLL"
COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft®
Windows® Operating System" FILE_VERSION="5.1.2600.2180
(xpsp_sp2_rtm.040803-2158)" ORIGINAL_FILENAME="kernel32"
INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft
Corporation. All rights reserved." VERFILEDATEHI="0x0"
VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2"
MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001"
UPTO_BIN_FILE_VERSION="5.1.2600.2180"
UPTO_BIN_PRODUCT_VERSION="5.1.2600.2180" LINK_DATE="08/04/2004
07:56:36" UPTO_LINK_DATE="08/04/2004 07:56:36"
VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>
Seems like an XML doc.
I tried by extracting all the file with WinRAR but nothing
worked
Please let me know if you need more information.
Thanks
.:.WAHAB -
Issue with tables :( Plz Help!
Hey all!
Never posted before on this forum and pretty new with
dreamweaver. So I'm having the strangest issue with dreamweaver
tables. I bought a template that I'm modifying by my self which
isnt all that hard haha. But Here's what I ran into. Whenever I put
one table and then another one under it and another one under it
and I insert txt or pics in there and save it, after I upload it
and preview it, I can only see the info from the first table.
Everything else under it, wont show up.
So no matter where and on what page I do it from that
template, if I put more than 1 table down, it'll only show the info
from the first and top table and everything else in other tables
under it, wont show up at all (after I upload it) even thou it
looks good on dreamweaver itself :(
Is there an option to enable or disable something? Plz help,
thank you all!"Unknown7" <[email protected]> wrote:
> So no matter where and on what page I do it from that
template, if I put more
>than 1 table down, it'll only show the info from the
first and top table and
>everything else in other tables under it, wont show up at
all :(
>
> Is there an option to enable or disable something? Plz
help, thank you all!
The bad news is that if you want to do anything remotely
complicated with
Dreamweaver you will have to learn a fair amount about HTML.
I would virtually
guarantee that when you put your new table in something is
going wrong so that
one or other table is not being defined correctly.
As you are modifying someone else's template there is
virtually no way to find
out what is happening other than to examine the HTML. It is
unlikely that
fiddling with any Dreamweaver settings will make any
difference.
Every table should start with something like:
<table width="100%" border="0" cellspacing="0"
cellpadding="5"
bgcolor="#e0e0ff">
<tr align="center" valign="middle">
<td width="9%"><a href="#Bottom">
and end with:
</td>
</tr>
</table>
You can have more or less as many columns as you like in a
table, (<td> ...
</td>
And more or less as many rows ( <tr><td> ...
</td></tr>) as you like, but
unless you get up to special tricks you should have the same
number of columns
in every row. You can put anything you like -- images, more
tables, whatever --
inside a cell e.g.:
<td> image, blah, table </td>,
but you mustn't put any content anywhere else, and every
opening definition
(<table>, <tr>, <td> must have a matching
closing definition in the correct
order.
You can nest tables more or less indefinitely, but
Dreamweaver Design View
sometimes blows its top if you go more than three deep.
HTML usually doesn't produce any error messages, but the
effect of omitting any
of the steps in building a page is quite unpredictable.
Sometimes a major error
will not produce any visible effect, but on other occasions a
minor error will
send the page completely haywire.
You may care to have a look at:
http://www.corybas.com/Technical/Wrapping.htm
This has a series of demonstration pages illustrating what
happens when you try
to display increasingly complicated page layouts on narrow
screens.
Once you have learnt to interpret HTML, you can often learn a
lot by inspecting
the source code for the page (in IE click view, then Source).
This works with
anybody's page, so you can look at the source code for my
pages if you wish.
Clancy -
Dell Wireless(DW1530, DW1540) issues with VoIP on 802.11n
We are having issues with VoIP, using Microsoft Lync, over wireless. We are experiencing static, jitter, dead air, and dropped words during calls. We have a Cisco wireless infrastructure consisting of a 5508 controller and 2602 access points. We're currently runng OS version 7.5.102.0, but the issues also occurred when running OS version 7.4.100.0.
On the client side, we've narrowed the issues down to Dell Laptops(Latitude E6430, Latitude D640, Latitude E6420) with Dell Wireless/Broadcom(DW1530, DW1540) network adapters that are 802.11n capable.
Latitude E6430
OS - Windows 7
wireless adapter - DW1540
driver - 5.100.82.112
Latitude D640
OS - Windows 7
wireless adapter - DW1530
driver - 5.100.235.12
Latitude E6420
OS - Windows 8
wireless adapter - DW1530
driver - 6.30.58.26
All of the drivers are the latest offered from Dell.
If we disable high throughput (802.11n) on the access points and force the clients to connect with 802.11a or 802.11g, we don't experience any issues.
If we use another manufacturers 802.11n USB NIC in the same hardware, we don't experience any issues.
This seems to be a compatibility issue between Dell Wireless(Broadcom) 802.11n capable network adapters and Cisco access points. I'm guessing this issue is with all 802.11n traffic, but we're only noticing it during Microsoft Lync voice calls.
Has anybody else had this type of problem and found a resolution?Has anybody else had this type of problem and found a resolution?
I've seen some Intel chips that simply "misbehaves" when operating in 802.11n. Going to the laptop manufacturer's website to download the firmware is next to useless. Going to the NIC manufacturer's website to download the LATEST firmware is more reliable.
There's a significant version "gap" between the firmware published with the laptop manufacturer vs the ones with the wireless NIC.
I suggest you go to Broadcom and load the latest firmware in one or two machines just to test. -
Can java.security packages work with applets? Help required urgently.
I recently developed an applet using java.security.KeyPairGenerator, from which I called the KeyPairGenerator to generate a pair of keys for RSA.
The code :
KeyPairGenerator kpg = new KeyPairGenerator.getInstance("RSA");
However my applet refused to work and couldn't find the algorithm specified. When I replaced it with DSA, it could work. Why is this happening?I think your browser is using older or its own Java Virtual Machine to run the applet.
For example IE, it has its own Microsoft Virtual Machine and if you choose to use it, it will definately fail. You can try use the JRE 1.4 Release Candidate version. Because the security is bundle with it, not sure with JRE version 1.3
Or alternatively, you can use the appletviewer to execute the applet. Again, make sure you run the correct version of appletviewer.
Good Luck. -
Issues with Win 7 & CS2. Illustrator and Photoshop have "Stopped Working"
Hi, New to this so I apologize in advance. Bought a new computer in December '09. 6gig quad processor and plenty of 500gigs of disc space. NOt a Memory Issue! Installed CS2 ( 'cause the computer took all of my money!) and all worked fine until 4 days ago. I mainly use illustrator and photoshop. When I tried to save a document... The programs simply "Stopped Working" I'm a rookie with the tech stuff so please speak slowly and simply.... I would appreciate any help as I'm losing money and work right now! Thanks
CS2 is totally unsupported under Win 7. And if you have 6 gigs of RAM I'll guess that it's a 64 bit system which simply adds to the complexity.
Sorry, but the best advice you'll get is to upgrade.
Bob -
I am wondering if anyone else has encountered Multicast problems with Windows XP.
I think I am, and believe these issues are preventing the servers in my clusters
from syncing their JNDI tree bindings.
I noticed this while configuring a JMS Server and Queues in a clustered development
environment. It is a simple cluster of 2 servers both on a single Win XP machine,
see post 14712 in weblogic.developer.interest.jms (http://newsgroups2.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.jms&item=14712&utag=).
I tried the MultiCast test utility (http://e-docs.bea.com/wls/docs81/admin_ref/utils.html#1199798)
and found what I think means I have a multicast problem. Output follows:
------ Begin MultiCast test utility output: ------
C:\bea\weblogic81\server\lib>java -cp weblogic.jar utils.MulticastTest -N server200
-A 237.155.155.1 -t 15
***** WARNING ***** WARNING ***** WARNING *****
Do NOT use the same multicast address as a running WLS cluster.
Starting test. Hit any key to abort
Using multicast address 237.155.155.1:7001
Will send messages under the name server200 every 2 seconds
Will print warning every 15 seconds if no messages are received
I (server200) sent message num 1
I (server200) sent message num 2
I (server200) sent message num 3
I (server200) sent message num 4
I (server200) sent message num 5
I (server200) sent message num 6
I (server200) sent message num 7
java.net.SocketTimeoutException: Receive timed out
at java.net.PlainDatagramSocketImpl.receive(Native Method)
at java.net.DatagramSocket.receive(Unknown Source)
at utils.MulticastTest$Receiver.run(MulticastTest.java:304)
I (server200) sent message num 8
I (server200) sent message num 9
I (server200) sent message num 10
I (server200) sent message num 11
------ End MultiCast test utility output: ------
I expected to see "Received message X from server200" messages, like I saw from
the Win2K machines I tried.
There is a Microsoft Knowledge Base Article - 827536, "An IP multicast may not
be sent correctly from Windows XP or from Windows Server 2003" (http://support.microsoft.com/default.aspx?scid=kb;en-us;827536).
The issue appears to be limited to computers with more than one network adapter
(like I have). I am pursuing the hotfix from Microsoft, but these things take
time.
Anyone else having similar issues?
Any and all help is appreciated.
I am facing a problem and believe that its because of multicast too. The problem
is seen on XP but not on W2000.
The MulticastTest when executed does not show any message exchange at all. When
a server is started I get following exception
<BEA-000364> <Server failed during initialization. Exception:weblogic.server.ServerLifecycleException:
Failed to listen on multicast address
weblogic.server.ServerLifecycleException: Failed to listen on multicast address
at weblogic.cluster.ClusterCommunicationService.initialize(ClusterCommunicationService.java:57)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:922)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
at weblogic.Server.main(Server.java:32)
Caused by: java.net.SocketException: error setting options
at java.net.PlainDatagramSocketImpl.join(Native Method)
at java.net.PlainDatagramSocketImpl.join(PlainDatagramSocketImpl.java:134)
at java.net.MulticastSocket.joinGroup(MulticastSocket.java:274)
at weblogic.cluster.FragmentSocket.initializeMulticastSocket(FragmentSocket.java:92)
at weblogic.cluster.FragmentSocket.start(FragmentSocket.java:109)
at weblogic.cluster.MulticastManager.startListening(MulticastManager.java:164)
at weblogic.cluster.ClusterCommunicationService.initialize(ClusterCommunicationService.java:52)
... 4 more
>
Are you experiencing similar problem ?
Parag
"Andy Frank" <[email protected]> wrote:
>
>I am wondering if anyone else has encountered Multicast problems with
>Windows XP.
> I think I am, and believe these issues are preventing the servers in
>my clusters
>from syncing their JNDI tree bindings.
>
>
>I noticed this while configuring a JMS Server and Queues in a clustered
>development
>environment. It is a simple cluster of 2 servers both on a single Win
>XP machine,
>see post 14712 in weblogic.developer.interest.jms (http://newsgroups2.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.jms&item=14712&utag=).
>
>
>I tried the MultiCast test utility (http://e-docs.bea.com/wls/docs81/admin_ref/utils.html#1199798)
>and found what I think means I have a multicast problem. Output follows:
>
>
>------ Begin MultiCast test utility output: ------
>C:\bea\weblogic81\server\lib>java -cp weblogic.jar utils.MulticastTest
>-N server200
>-A 237.155.155.1 -t 15
>***** WARNING ***** WARNING ***** WARNING *****
>Do NOT use the same multicast address as a running WLS cluster.
>
>
>Starting test. Hit any key to abort
>
>
>Using multicast address 237.155.155.1:7001
>Will send messages under the name server200 every 2 seconds
>Will print warning every 15 seconds if no messages are received
>
> I (server200) sent message num 1
> I (server200) sent message num 2
> I (server200) sent message num 3
> I (server200) sent message num 4
> I (server200) sent message num 5
> I (server200) sent message num 6
> I (server200) sent message num 7
>java.net.SocketTimeoutException: Receive timed out
> at java.net.PlainDatagramSocketImpl.receive(Native Method)
> at java.net.DatagramSocket.receive(Unknown Source)
> at utils.MulticastTest$Receiver.run(MulticastTest.java:304)
> I (server200) sent message num 8
> I (server200) sent message num 9
> I (server200) sent message num 10
> I (server200) sent message num 11
>------ End MultiCast test utility output: ------
>
>I expected to see "Received message X from server200" messages, like
>I saw from
>the Win2K machines I tried.
>
>
>There is a Microsoft Knowledge Base Article - 827536, "An IP multicast
>may not
>be sent correctly from Windows XP or from Windows Server 2003" (http://support.microsoft.com/default.aspx?scid=kb;en-us;827536).
> The issue appears to be limited to computers with more than one network
>adapter
>(like I have). I am pursuing the hotfix from Microsoft, but these things
>take
>time.
>
>
>Anyone else having similar issues?
>
>Any and all help is appreciated.
-
Issues with digital certificates - HELP!
I have no rational explanation, but this past week I was playing with the settings on my computer and deleted all the digital certificates in my computer.
Since then, everytime I want to check my Yahoo! or Gmail, or any type of secure account, there is a pop-up indicating something about not having a secure certificate. I've tried to add the X509 but it just doesn't store it and the next time I reboot the same thing happens all over again.
Can someone please help? Thank you!!I assume you are talking about the icon on an iPad.
Not all apps have Airplay functionality, more will with time.
If it's the same app sometimes showing icon, sometimes not I would suspect transient network issues losing the connection between the devices. Some of Apple's device seem a bit slow to re-establish connections if they're lost or stubbonly refuse to reconnect - occasionally this can be down to a user's network or the device at either end losing connection even if the iPad remains connected.
There may of course be some software bugs at play. -
Need help getting itunes to recognize my 4s, my older other computers have no issues. I have hp 2000 with windows 8.1..
That didn't work for me....I have done every concievable action to resolve this....now I am getting pissy......Went through all the suggestions on the support page....I am going absolutely nuts here, uninstall, reinstall, set this default to that....NO ONE KNOWS WHY THIS IS HAPPENING OR IT WOULD BE ADDRESSED ALREADY!!!!!!
Sitting right next to my new laptop is the old one that started out with XP on it. Has Win7 and itunes fires right up. I called my brother, he doesn't have apple products. He just bought a new laptop and did the 8.1 upgrade and guess what? Itunes still won't recognise my 4S....
ANY FEEDBACK WOULD BE GREAT. However, keep in mind I have done everything except throw the laptop and the phone.....
IF IT AIN'T BROKE DON'T FIX IT!!!!!!! -
Issue with Smart View Help Contents using v11.1.2.0.01
Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBMWell, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM -
Can't get wireless keybord to work with Win XP
Hello,
I've installed Win XP SP2 on my iMac via Boot Camp and am having problems getting the Apple Wireless keyboard to connect. I did get the wireless mighty mouse to work by entering a passkey of "0000". For the keyboard, I've tried entering an 8 digit key and 16 digit key and also let Windows pick a key for me but nothing works. Initially the status would show that the keyboard is connected but then after a few seconds it will say there is no passkey or something to that effect, and the connection would then be lost.
Does anyone have any ideas how to get this to work?Had problems with wireless keyboard, but have just got it working a second time. Might be worth trying.
1. You need a working mouse (either a USB, or the mighty mouse.)
2. I did try the method as described in the bootcamp guide, but I don't have a USB keyboard so got the computer to choose the passkey. The keyboard would initially connect, then lose the passkey.
Then I tried this
1. Run the same add bluetooth device program. Make sure it's in discovery mode (check the tabs).
2. Click add device and wait for keyboard to appear.
3. DON'T then click next. Instead right click the keyboard icon, click properties, one of the tabs has an option to download drivers. Tick this and click apply.
4. I was advised to reset, which I haven't, and haven't closed the bluetooth install program. The keyboard is now working.
I can only think it's something to do with working around the need for a paaskey, which seems to have caused some problems. Please let me know how you find this.
G
Maybe you are looking for
-
How can I change my original security questions? After changing my AppleID and password, I am not given an opportunity to change my security questions, which I cannot remember the answers to, so I cannot purchase any music.
-
Problem with the product activation adobe acrobat 9 standard.
I have a problem with the product activation adobe acrobat 9 standard. It is a failed hard disk to the pc and was not able to deactivate the license adobe. Now I replaced the hard drive and reinstalled the software but it tells me that all licenses a
-
I have final cut pro 5 and it keeps asking for my serial every time i open it again. What can I do?
Everytime I open up Final Cut Pro I have to enter my name and my serial. It's annoying to have to do every try. Does anyone know what's wrong or what I can do? I have final cut pro 6(the one that came with final cut studio 2)
-
Is there a call block function for the iPhone 4S?
Is there a call block function for the iPhone 4S? If not, will it be offered in the future? what else can I do to the phishing calls?
-
Getting rid of white space when importing Flash
When I import a Flash file onto Dreamweaver, I am getting the white space (canvas) that I don't want. I previously used Flash and Dreamweaver 8, and I added this to the html to get round it (highlighted by *'s): <div id="quick"> <object classid="clsi