Wireless setting up Photosmart C310 series to Belkin Play usb wireless adaptor.

I am strugling to set up my printer to the Belking  adaptor. The printout shows that the SSID failed. Anyone able to help me please ?
This question was solved.
View Solution.

Your printer can connect to your Orange Live Box wirelessly (or wired like your computer).   If your computer is connected to the Orange Live Box via Ethernet, your router will allow communication even though the printer is wireless and the computer is wired.
I don't think you need the USB card.  Just run the Wireless Setup WIzard from the front of the printer (Setup > Network area) to connect it wirelessly to your Orange Live Box, then download and run the software from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HP Photosmart C310 Series Printer Display and power LED not lit...still able to print.

    I am not sure what happened. I was printing, walked upstairs, came back down and the display and power LED on my Photosmart C310 were off. I thought the circuit for the outlet had tripped but that was not the case. I unplugged the printer, disconnected the power supply and let it sit for 2 minutes. Plugged it back in and nothing changed. Forced off printer/reboot?..nothing changed. Tried online utility. Useless. Is this common? Is there a solution? Any suggestions? Thanks in advance.
    Have had problems with HP and Compaq in past and obviously made a mistake buying again. Product is past warranty and I am not willing to pay to speak with a "representative" who is on a computer using a diagnostic tree program literally taking shots in the dark. Thanks but no thanks HP. I would love to Office Space this friggin' printer but I'll hold off for now.. 

    I experince the exact same issues and have for most of the time I have owned my C310A. I've gone through all the firmware upgrades, the useless patches etc. something is WRONG with the printer as my power modules continues to pump out the voltage after the printer shuts down(I've confirmed with a voltmeter). My printer will be printing a photo and the display will shut off, the power light and wireless LED lights go off BUT the photo continues to printer and the carriage will return to its resting spot THEN remain unresponsive till I go through the unplug routine. It's no wonder HP discontinued this printer and I'm throughly disgusted at tthe lack of quality in the components. I('ve gone through at leat 5 HP printers in the last6 years, each printer failing to either power issues or ink delivery systems. There is a very obvious lack of quality control. I feel as thoughHP sells the shoddy printers to force continual upgrades and flow of ink sales.  The design and engineering and features of the C310 A is to be commended but the qulaity and reliabilty of the mfg. product is abysmaly horrible. HP once had a solid quality control methodology that was second to none now  its just too little and too late.

  • Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized?

    Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ?  I have the same printer/scanner/fax at work and I couldn't get it to scan either.  They just keep saying No scanners were detected. 
    And it tells me on the scanner to do it from the computer!!  Ugh!!!!!  I need it done yesterday!  This ePrint has been very disappointing.  Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up!  What good is having wireless if I have to go to it?  I might as well plug in!   Waste of money and can't afford to buy a different one   But any answers would be greatly appreciated.
    OS- Windows 7 64-bit 

    jewlz0001 wrote:
    Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ?  I have the same printer/scanner/fax at work and I couldn't get it to scan either.  They just keep saying No scanners were detected. 
    And it tells me on the scanner to do it from the computer!!  Ugh!!!!!  I need it done yesterday!  This ePrint has been very disappointing.  Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up!  What good is having wireless if I have to go to it?  I might as well plug in!   Waste of money and can't afford to buy a different one   But any answers would be greatly appreciated.
    OS- Windows 7 64-bit 

  • Problem between (10.9) Mavericks and Photosmart Premium C310 series with the scan(ner)

    Hello,
    I have a serious problem with my Photosmart Premium C310 series with the scan(ner). I get a black image with white stripes (or an error 30) when I save my picture or my document on Mavericks (Mac OS X 10.9) installed yesterday.
    With Moutain Lion all was OK.
    My HP Scan is 2.4.3
    Model name : CN503B
    Serial Number : {Private Information Removed}
    An update is planned as soon as possible  ?
    Thanks in advance.
    Valorisa

    Hello
    Can you please advise what software you are using to scan ?  HP Scan app or Image Capture or Preview ??
    I think you are using HP Scan app, yes ?
    Did you know you can also scan using Preview or ImageCapture ?   You might try this as a test.  Make sure printer is turned on and available on same network as your Mac.
    Open up Apple's Preview app from your dock.  Under File menu, select "Import from scanner", you may have to do this twice to get printer to show up.     You should get a scan dialog window with many options to help you scan and save the file.
    Please let us know if this works, I'd like to know if the issue is with the HP scan software or something else. 
    If this reply helped you, please say thanks by clicking the blue Kudos star.
    I am an HP employee

  • HP Photosmart Premium C310 Series.......Printhead Problem

    I have the HP Photosmart Premium C310 Series Printer. It will no longer print. There is an error message of "Printhead Problem", with the instructions of:  Remove all Cartridges. Next, left black latch and remove printhead. Then re-install Printhead and Cartridges. I have done this several times with no success. Even went out and bought all new ink cartridges and tried those as well with no success. With this error message on the printer screen, it won't let me get off of that screen.

    Hi annie47here, and thanks for the reply.
    After reviewing the issue, it's possible you are experiencing printhead failures.  The best recommendation I could make would be to contact HP directly.  You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
    Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Does the HP Photosmart Premium Model C310 Series have the capability to do two side printing?

    Is my printer capable of doing two sided printing without manual intervention?

    Hi fildawg,
    First, check to see that the two-sided printing accessory is showing as installed:
    1. Click the Apple icon on the top bar, to the far left
    2. Click System Preferences
    3. Click Print & Fax (10.6.8 and Earlier) or Print & Scan (10.7.x)
    4. Click to select your printer (HP Photosmart C310) from the list on the left
    5. Click the Options & Supplies button on the right
    6. Click the Driver tab
    7. Look for a line item that says "HP Two-sided Printing Accessory (Duplexer)", and make sure it has a check mark to the left of it.
    Next, here are the steps to print two-sided:
    The following is an example of the print workflow I use - it is just the order of menus/buttons/settings that you go through when setting up a print job.
    1. Open a document to print
    2. Click File --> Page Setup (If Page Setup is available, Safari doesn't usually have this option).
    3. Under Format For: select the specific printer (Sometimes this will default to "Last Used Printer").
    **By specifying the printer, you enable the driver-specific options for that product.
    4. Select the Paper Size, then Click Ok
    5. Click File --> Print
    **Depending on the application, you may see a condensed driver window. Look for a down arrow or show details button to expand to the full size driver window.
    6. Depending on which version of Mac OS X you are using, the two-sided option will either be:
    - A check box towards the top of the driver window (or alternately, a selection within the Layout menu where you select the binding style).
    - A menu item located in the drop down menu that is just below Orientation.
    7. Click the Paper Type/Quality menu item, and ensure that these settings are correct for the media being printed on.
    8. Click Print.
    Please let me know if you need further assistance with this, or more detail.
    Thanks! 
    I am an HP Employee
    Click the KUDOS Star to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Photosmart C310 wireless issues

    I have purchased a brand new HP Photosmart C310 and I am complete unable to get the wiress connectivity working.
    I just purchased a new router hoping that may be the issue, however that did not solve the problem.
    Current setup is:
    Router: Dlink N300
    SID is broadcasting
    Security is WPA
    I have tried manual setup, WPS (wifi protected setup), and attempted to use the USB to Wireless setup on both Windows 7 and Mac OS.
    All attempts have failed. This printer has never for a second been connected to wifi here in my house.
    I have downloaded a suposed update from HP CPE_SLP_NETWORKMSI_hpcom_000_006.exe that was said to address network issues, no noticable difference.
    I have reset the settings to detault, unplugged it, moved it, and done everything short of blood offerings to make this device work. No luck.
    When I search for routers, it finds nothing, even though any device I have in the house thats wifi can see my router and the ones near me.
    Some times I get an error message stating that radio is broken and to contact HP, however I know from my own support background that DOA hardware is very rare.

    Print a Wireless Network test (Setup > Network menu).  It will self-test the wireless radio.  It sounds like it has failed, though.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My HP Photosmart C309a series printer can't find the wireless router 3 feet above it.

    My HP Photosmart C309a series printer can't find the wireless router 3 feet above it.  I ran the diagnostics and got "The wireless radio is not functioning" message.  In what device is the wireless radio located?  In the router? In the printer?  I reset the router, did the #6 with the printer, but I am still unable to connect my wireless Macbook to the printer.  My desktop Mac is connected to the printer with a cable and prints fine.  Is my router messed up or my printer?
    This question was solved.
    View Solution.

    Just call HP, they can walk you through the options based on what is wrong with your printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing from My Apple i-pad wireless to my HP Photosmart Plus Series 209B

    Unable to print from my Apple i-pad using a wireless Photosmart Plus series - 209B. Says no printer available and finding no where to change that.

    Hello 518,
    Welcome to the HP Support Forums!
    It would appear that the HP Photosmart Plus 209B is not compatible with AirPrint. Without AirPrint you can only print via an App.
    I suggest the ePrint App. Getting Started with HP ePrint Mobile Apps<---
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I'm unable to download the driver for photosmart C310 as the page is blank.

    My computer was just repaired so I've been trying to reinstall my printer (Photosmart C310). My computer can't find the printer even though they are both properly on the same wireless network. I've been trying to download the driver from HP in hopes that it will help but anytime I click on the link for either C310a b or c the page is blank. I have checked that my Adobe flash is up to date, so whats wrong with the HP page?

    Hi,
    It's blank could be because of this:
        http://support.hp.com/us-en/document/c04510394
    I've got the above link when go to:
       http://support.hp.com/us-en/product/HP-Photosmart-Premium-All-in-One-Printer-series---C3/4023238/mod...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't set up photosmart c4700 to iMac network

    I'm trying to set up a HP Photosmart C4700 series printer  my to iMac via wireless network. Now connected via USB, and I can print to it, though the Finder window doesn't show it as a device. I think I have a network but when I'm using the HP setup assistant, it comes back with:
    The network configuration was successfully downloaded to the device. However to continue configuring the device in network, your Mac must have access to the device. So please make sure that your Mac has access to the Network : "2WIRE490" and retry.
    I'm also trying to get access to the network for my new Kindle and it can't find it either.  So does that mean I don't have the network?  But shouldn't the printer show as a device?   So maybe I have a network but no printer?   AARRRGh

    This is Stephanie.  For some reason I was forced to pick a new username.
    It's been a while but I believe Apple told me it was a printer issue.  I gave up.  I think it worked a while with the cable, and then nothing worked.  One day I looked at the device list and there were two printers (same one listed twice with slightly different names I think).  They showed idle and then said in use and nothing worked.  A while later for some reason I deleted one of printers on the device list---and it worked again.   Still cabled together though.
    For  a while the HP setup assistant kept bedeviling me to finish but I ignored it because I didn't want to mess it up again. The setup asst has stopped appearing and the printer works.
    I may try uncabling it, when I feel daring.
    I suspect I had done conflicting things, and confused the little person inside.  Deleting the duplicate printer removed the conflict.
    so basically it's magic.
    good luck!

  • My Photosmart D110 series printer prints random documents all on its own

    I turned on the my Photosmart D110 series printer after being away for a few days and discovered that it was halfway through installing an update that I hadn't ordered.  I quickly aborted this process, but not before the printer began relentlessly printing random documents from my files; as soon as I cancelled, it began printing another.  The print queue is empty.  I uninstalled and reinstalled.  I downloaded and ran the HP Print Doctor, which says all is OK.  I unplugged and unplugged some more.  And it still does it.  My operating system is XP 2002 (yes, I know, I know...).   Do I need to throw in the towel and get a new printer?

    missnan,
        The printer will only print what the PC sends to it, so I would look more into your pc than the printer.  What you might try to do is uninstall the printer and re-install, but keep in mind that the pc is sending those print jobs to the printer.  Are you sure that the printer is printing files from your PC, this printer does have apps and it can be set up to print those on a daily basis.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • HP Photosmart D5100 series lack of a vital feature in Lion 10.7 OsX

    I had no problem under OsX 10.6 and no problem on Windows7.
    With new Lion 10.7, it was automatically downloaded the HP driver for "Photosmart D5100 series". My printer is D5160 and it has direct print to CD/DVD feature.
    In the new settings it is missing the capability to select "CD'DVD tray" or "print to CD/DVD" as it was in the past.
    I use the same "Disc Cover" software to print onto DVD's.
    Is this feture so well hidden than a user like me is so dumb not being able to find it or the HP software guys just missed it? 

    Hi Justin,
    I tried your suggestion and it didn't work.  The scanning function continues to operate with a mind of its own and the prompt window you mentioned didn't pop up.  I unchecked the "combine into a single PDF" box and once the first page was scanned and before I could get up out of my chair to change the document on the flatbed, it began to scan again and created a second file identical to the first one.  
    I even changed the color correction setting to "manual" hoping it would ask if I wanted to make changes and hoping it would give me time to change out the documents, but a window popped up where the scan image was and displayed a message saying the color correction was being done automatically.
    The only way I could successfully scan a multi page PDF document into the same file was to stand at the scanner and as quickly as possible change out the pages before it started to scan again.  
    Something must be wrong with the software drivers of the HP Photosmart 4580 that have been loaded into Lion.

  • E-fax will not accept my registration and i am connected to the network. HP Photosmart 7510 series

    HP Photosmart 7510 series
    Windows 7 64-bit

    Hello,
    The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
    When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
    If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Photosmart D110 series Disconnected!

    I'm suddenly unable to print and in the HP Solution Center I'm seeing the message, "HP Photosmart D110 series Disconnected!"  It will let me print the the "Wireless Network Test Report" and it says "No problems found" and everything is a "PASS" and the signal quality is "Excellent".  It will also let me print the "HP Network Configuration page" and that says "Ready" for status and "Active Connection Network Type" says "Wireless".
    Any clues how to correct this?

    OK, thanks.  Download and run this utility.  It should tell us what is going on.
    Initially, I suspect your security system.  What do you use?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for