Wireless Setup Wizard not showing up on printer to setup wifi on 1525nw
I am not able to see the Wireless Setup Wizard when trying to get my printer setup on a new network. I would like to reset the printer to factory default settings and need some direction in getting this done. Please help.
Keltex
Hi Keltex,
Indeed a Wireless Setup Wizard is not an available option for the CP1525nw, it support either Wireless Protected Setup (WPS) or wireless setup through the HP software on your PC.
If your new router supports WPS you may use that option from that menu and click the WPS button on your router or your router configuration utility (refer to your router manual for more information) otherwise run the software installation for your printer by selecting wireless connection, you will be prompted to temporarly connect a USB in order to configure the wireless connection.
For any issues, be sure to clarify your operating system.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Similar Messages
-
Wireless network connection not showing up in network connections
Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.Issue Resolved. I did not turn on the wireless switch.
-
Add PDF to iTunes not showing up in print PDF pop up menu
Add PDF to iTunes not showing up in print PDF pop up menu. I lost the print PDF to iTunes option. its no longer there. I still have web reciets and mail. also when i add in "edit menu" they don't get added.all this used to work fine
i found the answear. go to library/PDF Services or ~/Library/PDF/Services and clean out this folder. you can also add scripts and automator scripts to add things
-
A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?
Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer. -
I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help
Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G. -
Using osx mavericks on macbook pro. My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.
What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Bonjour printer not showing up in Printer List
I am having trouble adding a bonjour printer (HP PSC 1610). The printer is not showing up in the list of printers under System Preferences > Print & Fax. I was able to add the printer by clicking on the "+" sign. It found the bonjour printer and I clicked "Add." Everything seemed fine, but the printer is not showing up in the list of available printers.
When I'm in Printer Setup Utility, the Printer shows up when I click View > Show Printer List. I just can't select it when I'm in an application and trying to print.
I can print to the printer from my G5 which still has OS 10.3.9.
MacBook Pro 1.83 Mac OS X (10.4.7)I think the reason you haven't got responses is that no one has experience with that. Here are some generic troubleshooting steps to try, one at a time:
Repair permissions (Disk Utility).
Delete Print Prefs - search for (File>Find) files that start with com.apple.print and delete them all and reboot.
Reset Printing System (new in Tiger) - In Printer Setup, click this menu item found just above Quit Printer Setup.
If there is a downloadable Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD. -
HP C3180 will not show up on printer list or set up assistant??
When I try to add my new HP C3180 all in one printer, it will not show up on the printer list, or in HP set up assistant, and searches for new drivers fails to bring up any printers. My G4 does not seem to recognize the C3180 printer. Looked for updates to software and there are none. HP says I have the latest software. Uninstalled, and reinstalled HP software several times, still will not show up on the add printer list so I am not able to configure it. Previous Deskjet 970CXI printer is also missing which is OK if C3180 would show up. Anyone with any ideas? Thanks.
G4 AGP Graphics Sawtooth 1.3Ghz Mac OS X (10.4.7)
G4 AGP Graphics Sawtooth 1.3Ghz Mac OS X (10.4.3)If you are unable to print wirelessly, the comments below enabled me to print via my Airport Extreme. Just go to the "Print & Fax" system preferences, and 'add' a printer, then follow these instructions:
-You can print using bonjour in a roundabout way. Wireless printing will work if you select "hp photosmart p1000 g-print beta" in the printer browser under the "print using" option in the print and fax control panel. If you choose this option, the computer will think it's hooked up to a p1000. So it will work with airport express!
This advice was in the customer reviews section of the Apple Store for this printer, where a lot of people were complaining that they couldn't print wirelessly.
iMac Mac OS X (10.4.4) -
I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
Bookmarks not showing up in Printed Documentation
Hello all. I'm evaluating Robohelp 7 and all seems to be
working ok except for printing the documentation to PDF, (or word
for that matter) but that isn't so much of a concern at this point.
When I get to the second screen of the wizard to organize the
chapter layout and choose to do this from the TOC, some of my
bookmarks do not show but some do. I can't see what a difference to
determine why some do and some do not show up there.
Anyone have any suggestions. I would be grateful!Sorry for the confusion what I meant is of the bookmarks that
aren't showing up some of them have spaces (not actual spaces), and
some have none.
Upon looking further at the TOC I did notice a difference in
the bookmarks that are showing up and the ones that are not. The
ones that are showing have a # symbol rather than the underscore. I
tried changing one of the ones that isn't showing but it didn't do
anything. -
Printer not showing up in Printing Pane
I'm trying to print to a printer on the network. I've set the printer up in the Printer Setup Utility. I can see the printer in the utility. When I go in to any program and print, it doesn't show up in the drop down box in the printing window.
I've done everything that Apple suggests to do on their printer troubleshoot page. I've ran a disk permissions check.
Is there anything I can do besides reinstalling the OS again?Welcome to the forums!
You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall. -
Newly added printer is not showing up in printer list in Acrobat 11.0.3
Hello,
We are using Acrobat Pro 11.0.3. We recently added a new printer and that printer does not show up for one user of the machine in Acrobat. It shows up in other applications and under Printers. Other users who log into the machine can see the printer in Acrobat. I have uninstalled Acrobat, rebooted, reinstalled. I have also removed referenced to Adobe under HKEY_CURRENT_USER as well as APPDATA to no avail. Any suggestions would be greatly appreciated.
--mitchI have the same problem. Have you found any solution to this issue?
-
Server Admin not showing jobs in print queue
Hi All,
I'm not sure if others are having this problem or if it's just me. I am running Mac Server OS X 10.6.7 When I go to Server Admin and select "Print" and then "Job Status", I get a list of all the server's print queues. In the pane below the list of queues, there is a section that says "Jobs on Queue:" which then allows me to select any specific print queue. The problem is, no matter what queue I select, I am never able to see any of the print jobs going through the queue. I have sent multiple jobs to different printers on the server, all while watching the "Jobs on Queue" window for the appropriate printer. In every test, I have never seen ANY print job show up in that window, even though all the print jobs print out fine. I have even tried pausing a printer to let jobs queue up, and still nothing shows up in that window.
I have also tried the same tests while viewing the prints queues from the "Print & Fax" System Preferences pannel directly on the server. Still no luck. Everything prints out fine, but I am unable to ever see any print job hitting the queue.
The reason I even noticed this problem is because a user accidentally printed a 500 page document by mistake. The user called me to stop the job, but I was unable to see anything in the queue to kill. I tried deleting the job directly from the printer, but this just caused the printer to lock up. I would try powering off the printer and restarting it, but as soon as it powered back on, the print job would restart. I even tried restarting the server, but as soon as the server came back online, the print job started again. Finally, after hunting on the web, I tried logging into CUPS via http://localhost:631 and was able to see the print job listed there and finally delete it.
Is there any way to monitor print jobs on the server in real time? I found this previous archived thread describing what appears to the same problems using Mac Server OS X10.5.8, but there was never any solution listed before the thread was archived.
https://discussions.apple.com/thread/2152737Is there anyone using printing services on a Mac server at all that could comment on whether or not you see the print jobs listed in the queue when printing?
-
[SOLVED] Printer not showing up in print options but working (CUPS)
I am using Lexmark X1270 and have got it working via CUPS web interface (printed test page and all), but even after restarting CUPS daemon and rebooting, it does not show up in File > Print in any apps like Firefox, Openoffice, etc. All I see in the print is "Print to file," no printer shows up.
Last edited by colbert (2010-12-11 03:18:44)Same problem here with a HP LaserJet Professional 1102W.
Also:
[luc@borlox ~]$ lp
lp: Error - scheduler not responding!
[luc@borlox ~]$ lpstat -a
lpstat: Connection refused
/var/log/cups/error_log:
W [06/Dec/2010:14:27:23 +0100] Duplicate listen address "127.0.0.1" ignored!
E [06/Dec/2010:14:27:23 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
W [06/Dec/2010:14:30:19 +0100] Duplicate listen address "127.0.0.1" ignored!
E [06/Dec/2010:14:30:19 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
/etc/cups/cupsd.conf:
# "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $"
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
# Administrator user group...
SystemGroup sys root
HostNameLookups Double
# Only listen for connections from the local machine.
Listen localhost:631
Listen 127.0.0.1:631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Restrict access to the server...
<Location />
Order allow,deny
Allow from All
</Location>
# Restrict access to the admin pages...
<Location /admin>
Order allow,deny
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
</Location>
# Set the default printer/job policies...
<Policy default>
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
# Job-related operations must be done by the owner or an administrator...
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf.in 9310 2010-09-21 22:34:57Z mike $".
I would be very thankful for any hint. -
Colors not showing up and print doubleing and blurry
Some sites colors do not show as they should,in black and white.Print is superimposed over each other and blurry.I never had this problem till I down loaded firefox 4.
Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
Benjamin
Maybe you are looking for
-
Hi, I have been trying to down load some music to my Ipod. I keep getting the message: (Song name) was not copied to IPod IPod because it cannot be played on this I pod. Can anybody help? I have never had this problem before.
-
How to move data from one database to another oracle database
Hi All, AIX 5.3 Oracle 10.2.0.3 I want to move data between one oracle database to another oracle database. I know two method those are export/import dblink is there any other way I can move data? Thanks, Vishal
-
How to format date with in the file
Hi, I have the below data in a file, 101 02100002111406893401207310900A094101xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 5200xxxxxxxxxx D18000_1 CCDXXXXXXX JUL 31201207 1140689340000001 622113010547999999999003 000333333334RE 00030137 onee S
-
Computer shutting down after recent Lion install
After a period of non activity, my computer now goes into complete shutdown as opposed to 'sleep'
-
IPhone 3GS network ***** compared to iPhone 3G
I have been facing network problems with my iPhone 3GS since i changed from 3G to 3GS!!! So i decided to do a test and compare both the iPhone 3GS and 3G, it turned out that the 3G have a stronger network!!! (Btw i have 3 iPhone 3GS and 1 iPhone 3G)