Wireless sometimes not working after resume

After resuming from lid close hibernation wireless sometimes does not work.
Using Windows 7 64-bit
Intel 5100AGN driver 13.1.1.1
1. Have an active internet connection
2. Suspend closing the lid
3. Resume by opening the lid
4. Login
Result: Wireless has connection problems, cannot reconnect
Expected: Automatic fast reconnect
5. Deactivate the adapter and enable in again, or run troubleshooting which resets the adapter
6. Reconnect
How to fix that I have to reset the adapter or deactivate/enable it again?

right click my computer > manage > device management > network adapters > find your wireless adapter > double click > on power management tab, make sure "allow the computer to turn off this device to save power" unchecked

Similar Messages

  • Wireless not working after resume from sleep, T440s

    Some times when I resume laptop from SLEEP, wireless are not working...
    Solved!
    Go to Solution.

    Try new drivers. Helped me a lot.
    http://ns3369637.ovh.net/index.php/outils/Drivers/Intel/Wlan/PROSet-Wireless-WiFi-Software/Intel-PRO...

  • Keyboard wireless key not working after upgrading to windows 8.1

    Hello,
    I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
    Kindly suggest me some solution.
    Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
    Thanks.

    Hi @Jayesh_Bhadja ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
    The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook.  Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
    Make sure all your updates have been completed. I would try restarting my Notebook a few times.
    If that does not help I would uninstall the keyboard from the Device manager.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP 5524 Wireless does not work after firmware upgrade

    HI,
    I have just purchased an HP5524.  After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
    The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully. 
    However, ever since wireless will not work.  Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum.  The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
    Thank you

    Hi,
    Thank you for posting you query,
    In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen  instructions.
    If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup  and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Sound not working after resuming on maverik

    Sound stops working after resuming my Mbp. Reseting PRam solves this issue but its tempory. I have to restart my system everytime this issue occurs.
    I have one more issue regarding sound, which might be just another bug.
    When I plug my headphone, sound doesnt switch to head phone and I cant switch manually too from system preferences. To fix this issue, I have to close the lid and wait for a while for system to sleep and resume system. after resuming, Os starts detecting my headphone. strange!

    For those of you reading this just thought that I would update you.  After spending 90 minutes on the phone and resetting/restoring the phone twice, with two different level of tech support they have deemed this a hardware issue now.  This phone worked perfectly fine before the ios 6.1.2 update that was done yesterday.  Worked fine, played music, took calls, did all the sounds, then updated and now nothing!
    Our family has 4 iphones, several ipods and 2 ipads.  I am now left with a phone just out of warranty (by 2 mo) and no choice but to pay the $200 to apple to get another phone.  Apparently this is a steal because a new 4s costs $600.! lol.  I am greatly disappointed.  I have been given the corporate phone number and assured that there would be someone in customer service to talk to, but there was not, no surprise to me.  Anyone else have any suggestions? 

  • Wireless trackpad not working after lion update on May 15, 2012

    Right after OSX update on May 15, 2012, the pairing of my wireless trackpad to the desktop is no longer working.
    First the bluetooth found my trackpad.  After clicking "continue", the box showed: "No trackpad found  The pariing attempt was unsuccessful, click "continue" to try again. 
    I've been trying for several times.  Still not working!!

    Yes, I did replaced a new set of batteries!!  The computer keeps finding new wireless trackpad but once I click on continue, the box showed "the pairing was unsuccessful".  Again, this happend when I updated my OSX this morning.
    I clicked on the bluetooth set up box.  It shows a green light (connected) but sometimes turned red (disconnected) for no reason.  Then I clicked on "Monitor connection RSSI.  As I played with the trackpad, there seemed to be signals being detected by the desktop.
    Still, the mouse cursor cannot be moved by the wireless trackpad and the pairing is still unsuccessful.
    JyhMin

  • Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

    Hi, everyone!
    I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
    ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
    ThinkPad Power Management Driver version 1.60;
    ThinkPad Modem Adapter version 7.80.8.0;
    ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
    Inter Wireless WiFi Link for Window XP version 13.02.0000;
    ThinkVantage Access Connections for Windows XP version 5.62;
    ThinkPad Power Manager version 1.88;
    Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
    I've got a Lenovo T61 with Windows XP SP3.
    Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
    Bluetooth Hands-free Audio;
    Bluetooth LAN Access Server Driver.
    Does anyone have any idea what can be done to have these issues solved?
    P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

    Hello and welcome,
    I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61.  I guess that makes 3
    _Maybe_  your situation is the same.
    The fix in all 3 cases was to go to device manager and uninstall the wifi driver.  Then scan for hardware changes and let it reinstall the driver.  Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
    On both of the friend's machines, the wired networking was also b0rked.  Same fix there.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Touchpad permanently not working after resuming from suspend

    I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
    Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
    In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
    In Linux, I can see the difference is kernel traces when the driver is loaded.
    Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
    Now    : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
    After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
    It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
    Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
    The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

     I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home.  When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
    BTW, sorry I can't help... but at least I am entertained easily.

  • Usb wireless mouse not working after latest -Syu

    after todays kernel upgrade to :
    Linux archie 3.7.4-1-ARCH #1 SMP PREEMPT
    my usb mouse is not working anymore, The touchpad still works fine
    lsusb: Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
    any ideas?

    resolved: alternate usb-wireless mouse works fine - it's the battery!!
    oh well

  • [SOLVED] Sound (snd_hda_intel) not working after resume from suspend

    Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
    Running the following brings back the sound, but that is obviously a hack:
    fuser -k /dev/snd/*
    rmmod snd_hda_intel
    modprobe snd_hda_intel
    /etc/rc.d/alsa start
    I have on my /etc/modprobe/50-sound.conf:
    options snd-hda-intel model=laptop
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    Here's the exact hardware specification:
    # lspci -nnv|grep Audio
    80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
    Any idea where to look for this?
    Last edited by yhager (2009-08-21 16:54:00)

    [SOLVED]
    I downgraded to kernel 2.6.29 and the problem is gone.
    Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

  • Wireless printer not working after 10.5 upgrade

    My Canon All-in one MP600 was working fine using 10.4.11 and Airport Extreme Base Station. I upgraded to 10.5.4 and now the printer does not work. I checked the Airport utility and the printer shows under printer. The printer works fine on my wife's MacBook. The old printer setup utility app is not present on 10.5. Am I missing something? I followed the instructions to install the wireless printer but it still does not work. It works fine when I use the USB cable directly to my powerbook G4.

    Found problem. Removed printer from Sys Prefs -> Printers and Fax and re-installed it. Works now.

  • Wireless router not working after Windows update

    I have a WRT54G V.5 wireless router. Windows Vista Home Premium did an auto update. Now wired connection works, wireless does not. Asks for key, but when entered nothing happens. Diagnosis states action was canceled. I have disabled and enabled, does not fix. Any help will be appreciated! 
    Solved!
    Go to Solution.

    Take not of the Wireless Settings(SSID and WEP/WPA Key) on your Router...
    To know the Wireless Settings follow this link
    Once you know the Wireless Settings attempt to connect to your Wireless Network...
    XP :
    Click on Start and goto the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.
    Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
    Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
    Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...
    It will connect...
    Vista :
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Wireless sometimes not working: "dhcpcd: wlan0 reject NAK"

    HI,
    Normaly my wireless works fine (I have a FritzBOX wlan router). But sometimes, when connection, I get this:
    dhcpcd: wlan0: reject NAK
    The wlan still works for other computers ...
    What could cause this problem?
    I use the iwl3945 kernel driver for intel wlan card.
    Thanks!
    Nathan

    No, it's not the router. I have the same problem occurring sporadically, but my wired PCs can get to the router and work fine. I have an MSI notebook and have rt2x00pci, rt2x00lib and rt61pci all in my MODULES line of the rc.conf file.
    I don't remember when the problem started occurring, but it must have been at least several months ago.
    -- Dr. U
    A child of five would understand this. Send someone to fetch a child of five. (Groucho Marx)

  • Wireless does not work after chaning my router

    I have HP P1102W laser jet printer.
    The wireless feature worked fine until I recently changed my internet router(from linksys to cisco), and now I can't seem to get the wireless connection with my printer.
    I tried reinstalling the printer using the CD-rom but to no avail. 
    What can I do to get the wireless connection back?

    Hi,
    Thank you for posting you query,
    In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen  instructions.
    If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup  and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Lenovo b570 wireless internet not working after repair

    i had my computer sent out it wouldnt power on they replaced the motherboard bios and ram i think it said, anyways the internet wont connect it keeps saying turn the switch on on the front of the computer well it is on and the logo even pops up on screen showing im turning it on and off. the internet will work if i plug it in wired but not wiredless and when i troubleshoot it says enable wireless but it is enabled! if i go into the adapter setting and i try to click enable it wont connect. it worked fine ebfore i sent it out did they modify this or something?
    Solved!
    Go to Solution.

    i found a solution i clicked fn and f5 together and it let me enable it! i dont know why this option is hidden and unknown like this but now i got it to work

Maybe you are looking for