Wireless U-verse TV service unavailable and all troubleshooting's failed! Help?!

It's 6:30 pm and I've been trying all day to get my one wireless TV to work, to no avail. (The other two are connected, working just fine.) The error message greeted me this morning: "Wireless U-verse TV service unavailable." I've worked through any and all the troubleshooting directions I can find (when the website isn't telling me it doesn't find any services associated with my login information) but nothing is working. Anyone got a suggestion, before I break down and tie up my evening with a phone call to AT&T?

See if ATT Uverse Care can help. Click the ATT Uverse Care link in my signature below, send the PM, explain your TV problems/port card situation.
Include your name, account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply. There is no reason they should be dragging their feet on replacing the cards. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Similar Messages

My IPod nano (older version) is frozen, so I can't do anything, and all of the online "help" things say that the IPod icon should appear under "Devices" but it's not, and because the IPod's frozen... What should I do???

My IPod nano (older version) is frozen, so I can't do anything, and all of the online "help" things say that the IPod icon should appear under "Devices" but it's not, and because the IPod's frozen... What should I do???
<What's the difference between a message and a question?>

Which older model iPod Nano do you have? iPod Models
Read the user manual for a solution - iPod Manuals
A question ends with a "?" mark and a message ends with a "." period.

HT4946 hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

Hi,
usually when you upgrade, it should not delete your files, but if it happens, than you should have a backup.
Unfortunately it is very common, that people don't know, what exactly is in the backup.
The question is, what files exactly you are missing? Own pictures, or taken with the device? Purchased music form the iTunes Store, or own? ....
Documents and files are mostly up to the developer of the app, if they are part of the backup, usually not and you need to transfer them before.
In the backup you will find just pictures from the Camera Rolle folder, everything else you should have on the PC, if you had it on the device.
Same then for music, you can transfer purchased music from the device, but your own works just one direction, from PC to device, from device to PC it doesn't work.
In future I recomand you to be sure how the backup works or use a 3rd party app (iExplorer) where you have a little bit more "freedome" than with iTunes.
Or you maybe just restored from the worng backup

Sip 503 service unavailable and sip 500 internal server error

Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.

Hi there : can some one explain the reason that i am getting this sip error with itsp:
here is the debug of ccsip messages:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=uac
Contact:
Allow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported: timer,100rel
Diversion: [email protected]>;privacy=off;screen=no;reason=unknown,[email protected]>;privacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-Agent: VCS 5.8.2.56-03
Content-Length: 394
Content-Type: application/sdp
v=0
o=- 87852 198805 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 23682 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
c2801#er=phone>;tag=27BA64-1DAE
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=38
Content-Length: 0
00:43:23: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To: ;tag=27BA64-1DAE
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.129.221 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
I see in the debug that the itsp over g729 family codecs but not g711 at all
This system was working with this dialpeers before with same provider ,just i have added the dial-peer 2 .
I have changed the codec to match what is offered by itsp but no difference,still getting the same message.
PLZ help ASAP.

VirtualDisk on Windows Server 2012 R2 Storage Pool stuck in "Warning: In Service" state and all file transfers to and from is awfully slow

Greetings,
I'm having some trouble with my Windows Storage Pool and my VirtualDisk running on a Windows Server 2012 R2 installation. It consists of 8x Western Digital RE-4 2TB drives + 2x Western Digital Black Edition 2TB drives and have been configured in a single-disk
parity setup and the virtual disk is running fixed provisioning (max size) and is formatted with ReFS.
It's been running solid for months besides some awful write-speeds at times, it seems like the write performance running ReFS compared to NTFS is not that good.
I was recommended to add SSD's for journalling in order to boost write-performance. Sadly I seemed to screw up this part, you need to due this through PowerShell and it needs to be done before creating the virtualdisk. I managed to add my SSD to the Storage
Pool and then remove it.
This seem to have caused some awkward issues, I'm not quite sure of why as the virtualdisk is "fixed" so adding the SSD to the Storage Pool shouldn't really do anything, right? But after I did this my virtual disk have been stuck in "Warning:
In Service" and it seems to be stuck? It's been 4-5 days and it's still the same and the performance is currently horrible. Moving 40GB of data off the virtual disk took me about 20 hours or so. Launching files under 1mb of the virtual disk takes several
minutes etc.. It's pretty much useless.
The GUI is not providing any useful information about what's going on. What does "Warning: In Service" actually imply? How am I supposed to know how long this is supposed to take? Running Get-Virtualdisk in PowerShell does not provide any useful
information either. I did try to do a repair through the Server Manager GUI but it goes to about 21% within 2-3 hours but drops back down to 10%. I have had the repair running for days but it wont go past 21% without dropping back down again.
Running repair through PowerShell yields the same results, but if I detach the virtual disk and then try to repair through PowerShell (the GUI wont let me do repair on detached virtual disks) it will just run for a split second and then close.
After doing some "Googeling" I've seen people mentioning that the repair is not able to finish unless I have at least the same amount of free space in the Storage Pool as the largest drive in my Storage Pool is housing so I added a 4TB drive as
due to me running fixed provisioning I had used all the space in the pool but the repair is still not able to go past 21%.
As am running "fixed provisioning" I guess adding a extra drive to the pool doesn't do much difference as it's not available for the virtual disk? So I went ahead and deleted 3 TB of data on the virtual disk so now I've got about 4 TB free space
on the virtual disk so there should be plenty of room for Windows Server 2012 R2 to re-build the parity or whatever it's trying to do but it's still the same, the repair wont move past 21% and the virtual disk is still stuck in "Warning: In Service"
mode and the performance keeps being horrible so taking a backup will take forever at these speeds...
Am I missing something here? All the drives in the pool is working fine. I have verified using various bootable tools so why is this happening and what can I do to get the virtual disk running at full state again? Why doesn't the GUI prompt you with any
kind of usable information?
Best regards, Thomas Andre

Hi,
Please run chkdsk /f /r command on the virtual disk to have a try. In the meantime, run the following commands in PowerShell to share the output.
get-virtualdisk -friendlyname <name> | get-physicaldisk | fl
get-virtualdisk -friendlyname <name> |fl
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Can not get my SharePoint Online service up and running....help!!

Strange thing here!
this is what I did:
1.logged into my account, which is [email protected];
2.click the downfacing triangle right to Admin;
3.click SharePoint;
then see the following alert:
That didn't work
We're sorry, but [email protected] can't be found in the gsmtrans123-admin.sharepoint.com directory. Please try again later, while we try to automatically fix this for you.
Here are a few ideas:
Click here to sign in with a different account to this site.
This will sign you out of all other Office 365 services that you're signed into at this time.
If you're using this account on another site and don't want to sign out, start your browser in Private Browsing mode for this site (show me how).
If that doesn't help, contact your support team and include these technical details:
Correlation ID: 5086749c-644c-e054-0779-2f8db2d436c0
Date and Time: 2/15/2014 7:44:15 AM
URL: https://gsmtrans123-admin.sharepoint.com/
User: [email protected]
Issue Type: Partner User Invalid.
My questions:
1.How come?
2.What shoud I do to set up my standlone SharePoint Online service?
3.Can I get a later expiration date for this disrupption?
Thanks.

According to the error message, you are still using the same account.
[email protected]
I was able to reproduce the exact same error message when accessing my sharepoint.com site using an account with Global Administrator role, but without the proper licensing.
What happens if you go to https://gsmtrans123.sharepoint.com, or
https://gsmtrans123-my.sharepoint.com. Do you see any sharepoint sites, or do you get a error message?
Have you tried to open this in another browser, or cleared the cache in your current browser?
Could you try to create a new account, assign it the Global administrator role, and a SharePoint license, and then login to your admin site?
If all of those fail, you should probably create a Service Request using this form
https://portal.microsoftonline.com/Support/NewServiceRequest.aspx
/Anders Eide

Installing IOS 5.1.1 on my iPhone failed and now is not recognized by PC or itunes. All troubleshooting has failed. HELP!!!

Installing IOS 5.1.1 on my iphone failed and now the phone will not show up on itunes and is not recognized by my PC. I tried all troubleshooting Apple says to do minus uninstalling itunes. My wifes iphone still works fine with the same cable and itunes on my PC. ----- Help!

Hello. I was like this yesterday after upgrading 5.1.1. The proccess failed and the iphone only showed the USB cable with the iTunes logo.
What I did was connect the iphone to my wife's PC, and there, with a clean itunes installation, install a clean 5.1.1. Then, went back to my iMac and connect it again, and now it works.
But now, with my iphone working as new, it still cannot be showed up in itunes. I am still working on it.
Good luck!

I have sent two texts from abroad and all since have failed. Why?

The first two texts I sent from corfu went ok. All subsequent have failed. Why ? The numbers are in international format

Hi
Have you tried doing a manual network selection in settings and choosing a different network?
It may be there is an issue with the network your connected to.
Or sometimes just a simple reboot of your device can help!
Thanks.

So I tried the creating a new profile and all that, didn't help. Firefox still shows up on the process window, but wont open

So I've uninstalled it, reinstalled it, rebooted my computer, troubleshooted, ended the process and all the combinations of those. I created a new profile, since my settings may have been corrupted and followed the steps, and nothing. I've restored to a previous date, everything. Nothing works. It shows the process is running, but nothing show's up. I tweaked with the compatibility to see what would happen and chose to run it in 640x480 and it apparently worked, but it comes up invisible? I've asked people for help, but all they've done is called me a noob and told me to switch off to google chrome. If someone can help, I'd greatly appreciate it.
Also, I'm currently running Windows 7 starter for an OS.
== This happened ==
Every time Firefox opened
== My battery died and I rebooted. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
1. Malwarebytes (Free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3.Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums you can use to help get rid of your infection. These include:
*http://www.bleepingcomputer.com/forums/
*http://forums.spybot.info/
*http://www.spywarewarrior.com/index.php .
Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]] Try [[Safe Mode]]

Hi one and all Iphone virgin needs help

i have just got an i phone 3gs my cousins old one was less than 18 months old it has know twice went black screen with apple logo the phone was not jailbroken it was with tesco mobile and all i did was put my o2 sim in and off i went any help much appriciated

Have Tesco unlocked the iPhone ?
If the iPhone was on a Tesco contract it is more than likely locked to them and will not work with another network

I have been using a jam classic wireless speaker on my macbook pro and all of a sudden it doesn't connect anymore. any idea whats wrong?

I successfully paired a Bluetooth HMDX Jam Classic Wireless Speaker with my macbook and have been using it for months. Then suddenly it will not work. Has anyone else had this problem. It isn't the speaker. The best buy guys tested it and it still works with other devises. Got any ideas?

Hello there, BeckyBoyette.
The following article offers up some great Troubleshooting Tips for issues with Bluetooth:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

My HD on my pc just recently went down. I had to buy a new HD and reinstall windows on the new HD. I am running a 64 bit system, and have installed itunes (x64). itunes wont recognize my phone. I have done all troubleshooting tutorials. HELP!

I just had to replace the HD on my system. I am running a x64 system and have installed the correct version of iTunes. ITunes will not recognize my phone since the new install. I have went online and followed all of the troubleshooting guides on Apple support. No good. I have uninstalled and installed iTunes several times. I have even tried reinstalling windows. I also get an error message when I start up Itunes that reads " The registry settings used by the itunes drivers for importing and burning cd's and dvd's are missing. This can happen as a result of installing other cd burring software. Please reinstall ITunes. I am so frustrated, I know there has to be a solution. I tunes works in all other senses, just not recognizing my Phone. I need help, my wife and I both have iPhones and need to sync..........
Please Help

You should be able to:
Backup the device to the new installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2

Works but not x2 iPad2. WiFi network is the same for printer and all Apple devices. Help.

We are unable to print from ipad2 using Epson Artisan 730 printer. Software download to Macbook was successful but unable to download software to x2 iPad2. All Apple devices are on the same WiFi. I followed the Epson instructions but message box pops up stating Safari unable to download file. Any suggestions.

Welcome to Apple Discussions.
The iPad and iPad 2 using iOS do not use the same software as your Mac using OS X.
They are entirely different operating systems.
Look in the iPad Apps Store for Epson iPrint app for iPad. It is free.
The Artisan 730 is one of the printers the app supports, so this app should allow you to print from your iPad.
If you're looking from the Mac side, open iTunes, and the iTunes Store, then the App Store, and search for Epson iPrint for iPad

No profile images, and all calls keep failing

Title says it all.
When I sign into skype on my xbox one, none of my contacts profile pictures load in.
Then when I try to make a call to anyone it says is online, the call trys for a bit and then fails.

Same problem here after the iOS 8 install and subsequent update. 2007 Lexus ES 350. Also, USB connectivity problems with other car stereos.
There is also another thread with the same issue: Re: Why does Siri bluetooth connection in 2008 Toyota Prius with iOS 8 terminate outgoing call with message "call terminated by network" on Prius screen
Apple Support - ARE YOU LISTENING?

Wireless U-verse TV service unavailable and all troubleshooting's failed! Help?!

Similar Messages

Maybe you are looking for