Wireless users not visible in PRSM with CDA integration

I have ASA 5515x v 9.1 with CX module v 9.1.3 and CDA integrated into the AD domain. I can see the users to IP mappings for domain windows users , like desktops and laptops. I can not see the users to ip mappings for the wireless users. I see their IP adddresses but the usernames don't come in. I have the PRSM configured to use CDA. Do I need to also add the WLC somehow to the CDA setup?

Hi, Try one of the following:
1. Provision the native users with viewer role for BI+, if not done already
2. For the folder, containing the reports, have these users being provisioned? Are you able to view the users with provisioning access to the folder?
3. Do not put any filter for users and begins with combination to display all possilble users
Let me know if that works!

Similar Messages

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.

Got mine FIXED here is what i did:
Windows 7 64bit SP1, CS 5
Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
Tried activating through Suitcase Fusion 2 and also through FontExpert 2009 - but neither of them made the fonts visible in CS5 apps
1) open Start Menu/Control Panel/Fonts
2) on the sidebar there is "Font settings" item
3) set the settings as i did
[ ] Hide fonts based on language settings
[ x ] Allow fonts to be installed using a shortcut (advanced)
FIXED mine,
now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING

Time Capsule wireless network not visible.

I have a first gen TC which up to today was working great.
Today it was very, very slow on the wireless side but ok on the wired side.
I restarted the cable modem and the TC, after which everything looks okay - but the wireless network is not visible to any of my devices.
I have restarted it three times, reset it to factory and reconfigured it, switched the network settings to no security and other things but my iPhone, my iPad and my MacbookPro do not see the wireless network regardless of the security option or the networking type - N-only or B/G compatible.
As I say it was fine until I returned from vacation today.
Any thoughts?

OK, so I have done this and it's made no difference. The new network Apple Network b73829 is still present alongside Wireless LAN.
I can only access Time Capsule if I switch to the new network, with the resulting loss of internet access from my Powerbook and, if I switch back to Wireless LAN I regain internet access but cannot see Time Capsule.
Although I just want to use Time Capsule to back up I have tried to connect it to my wireless LAN using the Join Existing Network on Airport Utility (even though I've been told I don't need to do this for Time Machine) but it has failed each time. After entering the password and wireless password information etc. and pressing update the Time Capsule device does re-start but there is ALWAYS an error message that says the device cannot be found and I should check that I am close to it (it's 3 feet away) or I should connect via Ethernet. If I connect via Ethernet it seems to disable the wireless functionality that I bought the device for.

Business Area not visible to account with admin privileges

Hello,
I've encountered the following scenario on visiting a client site:
A Business area has been created by the EUL owner account (IFL) and he has granted admin privileges to another account (BRIANB who has been granted the DBA role). However, when BRIANB logs onto DIscoverer Admin, the Business area in question is not visible. BRIANB is able to create a new business area in the EUL which includes folders that are part of the 'invisible' BA. BRIANB is not able to access the 'invisible' BA using Discoverer End User. I'd be very grateful if anyone out there has an explantion for this,
regards,
KEvin.

Problem solved. My client inadvertently created an additional EUL when initially logging onto Disco Admin as BRIANB. Thereafter this was the default EUL. The errant EUL has now been deleted the required BA's are now in view,
Kevin.

Ical user not visible as attendee

maybe somebody can help me here:
we have set up leopard server to manage our calendars - 8 users. at the beginning i had the problem, that we use email accounts hosted by our provider ([email protected]) whereas our server (servername.domain.com) hosts the user and ical accounts. if you add a user, the server adds an account named [email protected]. i managed to get the first seven users to be recognised as users having their main email address as being [email protected] and ical would be fine.
except for one person. let us call her susan. susan can't add her account via ical with her user name, password and entering the server's full qualified domain name (servername.domain.com). she has to use the full serverside-url (http://servername.domain.com:8008/principals/_uids_/5C73D3F0-E478-47F6-8AA.....) to be able to see her calendar.
the odd thing then is, that
1. she can't add any of us as attendees
2. if we try to add her to an event she does not appear to be a member on the server
3. but i managed to add as delegate to view my calendar!
here is an excerpt of the server's error log:
2008-04-14 22:36:05+0200 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
2008-04-14 22:36:05+0200 [-] [caldav-8009] [AMP,client] PROPFIND /principals/_uids_/5C73D3F0-E478-47F6-8AA6-32D33D0C9FF5/ HTTP/1.1
2008-04-14 22:36:05+0200 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
2008-04-14 22:36:05+0200 [-] [caldav-8009] [AMP,client] PROPFIND /calendars/users/philip/inbox/ HTTP/1.1
2008-04-14 22:36:05+0200 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
2008-04-14 22:36:05+0200 [-] [caldav-8009] [AMP,client] PROPFIND /principals/_uids_/5C73D3F0-E478-47F6-8AA6-32D33D0C9FF5/ HTTP/1.1
2008-04-14 22:36:06+0200 [-] [caldav-8009] [AMP,client] PROPFIND /calendars/users/bdrentwett/ HTTP/1.1
2008-04-14 22:36:06+0200 [-] [caldav-8009] [AMP,client] PROPFIND /calendars/users/bdrentwett/calendar/ HTTP/1.1
2008-04-14 22:36:06+0200 [-] [caldav-8009] [AMP,client] PROPFIND /calendars/users/bdrentwett/calendar/ HTTP/1.1
2008-04-14 22:36:06+0200 [-] [caldav-8009] [AMP,client] REPORT /calendars/users/bdrentwett/calendar/ HTTP/1.1
2008-04-14 22:36:06+0200 [-] [caldav-8009] [AMP,client] PROPFIND /calendars/users/bdrentwett/inbox/ HTTP/1.1
2008-04-14 22:36:07+0200 [-] [caldav-8009] [AMP,client] PROPFIND /calendars/users/bdrentwett/inbox/ HTTP/1.1
2008-04-14 22:36:07+0200 [-] [caldav-8010] [AMP,client] PROPFIND /calendars/users/bdrentwett/inbox/ HTTP/1.1
2008-04-14 22:36:07+0200 [-] [caldav-8009] [AMP,client] REPORT /calendars/users/bdrentwett/inbox/ HTTP/1.1
2008-04-14 22:36:07+0200 [-] [caldav-8009] [AMP,client] PUT /calendars/users/bdrentwett/calendar/B82E9A53-98B4-4FE1-8938-540FC41414B1.ics HTTP/1.1
2008-04-14 22:36:07+0200 [-] [caldav-8010] [AMP,client] POST /calendars/users/philip/outbox/ HTTP/1.1
2008-04-14 22:36:07+0200 [-] [caldav-8009] [-] Writing to file /Library/CalendarServer/Documents/calendars/users/bdrentwett/calendar/B82E9A53- 98B4-4FE1-8938-540FC41414B1.ics
2008-04-14 22:36:08+0200 [-] [caldav-8009] [AMP,client] PUT /calendars/users/bdrentwett/calendar/33CEA7CA-962C-4369-A638-E99B61D6092E.ics HTTP/1.1
2008-04-14 22:36:08+0200 [-] [caldav-8009] [-] Writing to file /Library/CalendarServer/Documents/calendars/users/bdrentwett/calendar/33CEA7CA- 962C-4369-A638-E99B61D6092E.ics
2008-04-14 22:36:08+0200 [-] [caldav-8010] [-] 'No principal for calendar user address: invalid:nomail'
2008-04-14 22:36:08+0200 [-] [caldav-8010] [-] 'Error during POST for invalid:nomail: None'
2008-04-14 22:36:38+0200 [-] [caldav-8009] [AMP,client] POST /calendars/users/bdrentwett/outbox/ HTTP/1.1
2008-04-14 22:36:38+0200 [-] [caldav-8009] [-] 'No principal for calendar user address: invalid:nomail'
2008-04-14 22:36:38+0200 [-] [caldav-8009] [-] 'Error during POST for invalid:nomail: None'
2008-04-14 22:36:39+0200 [-] [caldav-8009] [AMP,client] POST /calendars/users/bdrentwett/outbox/ HTTP/1.1
2008-04-14 22:36:39+0200 [-] [caldav-8009] [-] 'No principal for calendar user address: invalid:nomail'
2008-04-14 22:36:39+0200 [-] [caldav-8009] [-] 'Error during POST for invalid:nomail: None'
is there a way to fix this?
thank you
philip

Make sure "susan's" computer is bound to the same OD directory as everyone else.
Make sure "susan's" account in OD is properly enabled for calendaring on the server.
Restart the calendar server.

The 'Add to Basket' button on Amazon is not visible. Occurs with earlier versions of Firefox and other websites.

On many websites, buttons are not visible but moving the cursor over them it changes to a hand so I know there is a button and the tooltip appears.
If I look at page info for the button it is shown as a transparent-pixel.

I have reset to Firefox defaults and problem has been fixed. Options>content>colours>allow pages to choose colours : if deselected, problem occurs, if selected it is fixed.

Traffic Redirection tab not visible in PRSM single device mode

I am using a 5515-X in single device mode. Software is version 9.2.1.2-69.
I noticed a couple things that I am not sure are a problem or not. When I go to the configuration overview tab PRSM shows mode of the ASA CX as "unknown". Also the User Guide says I should see a "traffic redirection" tab under configuration policies/settings but I don't see that.
I guess I can configure traffic redirection with ASDM but just wondering if this is normal, or cosmetic bug or something else?
Thanks,
Diego

If you're running single device mode (on-box PRSM) you cannot manage the ASA configuration like you can with the off-box PRSM. Note this section of the user guide which states:
"Traffic Redirection—(ASA, Multiple Device mode only.) Configure traffic redirection from the ASA to its CX module."

Users not visible in "Edit permissions..." in workspace

Hi there,
I have created several users using user management console (we are using native directory). Users can log into workspace and working in it.
But I have problems with defining permissions for folders/reports in workspace. In "Edit permissions..." dialog I can see only "admin" user and "WORLD" group.
Can anybody help me please?
Thanks,
Vlado

Hi, Try one of the following:
1. Provision the native users with viewer role for BI+, if not done already
2. For the folder, containing the reports, have these users being provisioned? Are you able to view the users with provisioning access to the folder?
3. Do not put any filter for users and begins with combination to display all possilble users
Let me know if that works!

Guest Wireless Users Not Able to Get to NAC Guest Server

First of all, I appreciate any of the help that can be offered on the post. Your solutions and suggestions have been valuable, in the past!
Here's the scenario. I have two internal WLC's, and one anchor mobility server, in the DMZ. The internal controllers are part of the 10.x.x.x range, while the DMZ WLC is in the 192.168.1.x range. We also have a NAC Guest Server, in the DMZ that has a 192.168.1.x address. Here's the problem, when a guest user uses our guest SSID, they're assigned a 172.16.x.x address, their traffic is intercepted, and they're presented with a login page. If they don't have login credentials, there's a "Register Here" link that takes them to the NAC Guest Server to self-register. When they click the "Register Here" link, for some reason they can't get to the NAC guest server. If I bring up a command prompt, and type in "telnet 192.168.1.x 80", it connects. The odd thing is that when I was testing, if I login with guest credentials, and then try to go to the NAC Guest Server self-service page, I can get to it with no problem. Would anyone have any ideas as to why?

I may have missed something here, but isn't the point of the guest portal that you can't get anywhere on the network (except the guest portal) until you have authenticated?

Wireless connection not visible on Vista laptop using Time capsule

Change setup with Time capsule 1 TB, all MAC PC's work perfectly with wireless connection, except Vista laptop.
Vista discovers all other wireless connections except the one from Time capsule.
On advise from forum, changed Airport settings :
- Radio mode = 802/a - 802/g"
- Wireless security to "none"
Which other setting on Vista prevents at least discovering the wireless signal ?
Thanks for your support !
Pascal

I believe the problem has to do with some potential compatibility issue between the SP3 update and the currently installed Boot Camp drivers. Did you make sure that you (re)installed the latest Boot Camp drivers after you performed the SP3 update?
(ref: Apple Support: Installing Boot Camp drivers)
Also, the following firmware update may help as well: MacBook EFI Firmware Update 1.1

Created mailbox for new user in Exchange 2010, user not visible in AD.

Hi everyone!
This morning I created a mailbox for a new user on my Exchange 2010 box.
Everything works fantastically but I am unable to view the new user in AD except by searching. If I run a search the results say the user exists in my Users container, and I can view the properties of the user account from the search results, but I
am unable to actually see the user profile object in the Users container.
I notice in EMC that the mailbox has a user icon on the mailbox icon instead of the regular standard icon - I'm not sure what this implies.
Can anyone offer some advice as to why this happens and how to resolve it?
Thanks!

Hi,
AD objects store in the Domain partition Database.
Its replication Scope is :Domain Wide
Its replication model is: Multi Master
There are two possible cause.
1. AD replication latency if you have several DCs.
You could wait for AD replication or force replication, Click
refresh on ADUC.
2. You create the new user
in other OU, not Users.
You could run this command to get
the user’s DistingushedName attribution.
Get-mailbox –identity
[email protected] |fl
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Skype for Business users not visible under "Online...

Hello,
It seems as if Skype for Business contacts do not appear in the "Online" contact list (see screenshot below), whether they are Online, Away, or Busy. If I switch to "All" contact list, the Skype for Business contacts immediatelly show up.
A workaround is to leave the "All" contact list, and hide offline contacts through Contacts -> Hide Contacts Who -> Are Offline.
While this workaround is good, I think it is much easier to use the contact list dropdown, than to go through the menu to view all contacts.
Has anybody experienced this same issue?
Thanks.
Solved!
Go to Solution.
Attachments:
Untitled.png ‏38 KB

I too have the similar problem, but with normal non-business client:
http://community.skype.com/t5/Windows-desktop-client/quot-Online-quot-Contact-List/td-p/3973422

Yahoo chat room users not visible in os 10.8

i just upgraded to 10.8 on a mac and now when I go into a chat room I cannot see who else is in the room. I used to be able to just "pull" from the left side of the rooms box and the names would appear, now i am unable to use the option , any one plz help me , how can i see the persons in the chat room .

While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

My own Google Map icons are not visible in Firefox 8

I have many Google Maps on my website and they contain both default Google icons and my own icons, each with their own URLs. They work correctly in all other browsers, and Firefox 7. However, yesterday I loaded Firefox 8. In Firefox 8 the Google default icons are still visible but my own icons are now invisible, but their placeholders are still there. They are still visible in other browsers. Also, if I now try and add one of my icons to a map, the process seems to work correctly, including a placemark name appearing, but the icon is invisible. The invisible icon is definitely there because you can click the placemark and be taken to the correct position on the map for editing, but the icon is not visible.

Same problem with my maps. You posted that this issue is solved at http://forums.mozillazine.org/viewforum.php?f=25 but it is NOT SOLVED!!!!! I'm not a web developer, so I don't want a solution where I have write code or be a developer to figure it out. It works in every other browser & in FF7, so why can't you just figure it out & fix it, instead of making us have to write code or use our own developers to figure it out??

Page canvast not visible

Hi all,
I have a small problem,
My page canvas is not visible on pages with a full page picture, the canvas falls behind the designs.
How can i bring the page canvas up front so my page numbers which are in the canvas will be visible again.?
Image: left page has the page number on the background, and right page is visible because there is no full size image on it.

@Martin – do you mean your page numbering is not visible due to the full page image?
That's a small "problem" with master spreads and master pages.
All objects on master pages that are stored on the same layer like the ones on regular pages are stacked behind that objects. Always.
To workaround this fact:
1. You need a new layer on top of all other layers, so create one
2. Go to the master page that is applied to the even page of your screenshot
3. Drag your object that is holding the automatic page numbering to that new top most layer
If you want a bit of flexibility, create a new master spread with only your object holding the automatic page numbering and apply this to the desired pages.
Uwe

Wireless users not visible in PRSM with CDA integration

Similar Messages

Maybe you are looking for