Wireless VLANs and Layer2/3 VLANs

Dear,
The vlans created for the mapping of SSID in embedded AP on cisco 1941 can be connected/communicated to the VLAN created on Layer2/3 switch.
Lets say i have created 3 vlans (say 200,201,202) for 3 ssid and the vlan created on switch (say 200,201,202) can be communicated?
Or these wireless vlan are purely for the mapping of ssid?. Thanks

yes that should be a trunk.. the below link is the configuration guide..
https://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/Software_Configuration.html
http://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/wlan.html
Regards
Surendra

Similar Messages

  • Wireless VLAN question

    I have two SSIDs on my Cisco 1242 APs.
    On one of the SSIDs i have clients that will constantly broadcast data (required).
    Will the brodcast traffic reach my other SSID? If so, is there a way to avoid it?
    Will creating a separate wireless VLAN on my AP and assigning it to that SSID contain broadcast traffic so it does not flood my other SSID?
    Thank you.

    Broadcast is allowed on the same subnet, so yes, broadcast will affect everyone in that subnet. Creating multiple subnets is what allows you to control the broadcast. Here is a link for autonomous for creating multiple vlan's.
    https://supportforums.cisco.com/docs/DOC-14496
    Sent from Cisco Technical Support iPhone App

  • CAPWAP Wireless VLAN in Routed Campus LAN

    I am configuring CISCO Wireless LAN Controller in College campus. we have the following components
     1. CISCO 4510R as core switch and a centralized WLC is connected to Core Switch
     2. CISCO 3560 L3 switch at Distribution Layer Switch
     3. CISCO LWAP 1142
    I want to configure Wireless VLAN in a college campus. Wireless LAN.  The requirement is to configure Distribution switch as L3 so that VLAN will not reach till the Core Switch. That is the Link between Distribution and Core Switch will be Layer 3 routed link and not a Trunk Link.
    Since it is a routed back bone environment, VLAN is configured only in distribution layer switches. So, these configured VLAN will not reach core
    switch.
    With that said, is it technically possible to achieve the Wireless VLAN in this above proposed setup.?
    Do I have to configure Trunk between Distribution Switch (APs are connected) and Core Switch (WLC is connected), to pass the Wireless VLAN in the trunk link?
    Advance Thanks for reading and helping to get it clarified
    SAIRAM

    We are in the process of moving to a mostly routed Campus, and had similar questions and a few more. We will be using only EIGRP, with each enclave set-up as a stub. I was wondering if I can modify our wireless network to be strictly routed, and remove all the trunk/access configurations from the switch ports facing  theAPs, and hard code (static) all of them to IP routed ports. We only have one WLC active, with one back-up. The WLC is facing our core switches in a LAG set-up. The network was originally set-up with all the dynamic interfaces for each AP set-up in a GLBP fashion between our two cores. Each AP had a dynamic interface created in the WLC and added to one AP group. All of our APs are now connected via ethernet to the wired infrastructure, so none of our APs are in true MESH fashion anymore. We use Microsoft DHCP to issue out IPs to our APs.
    I was wondering if I can remove the dynamic interfaces from the WLC, and use EIGRP to sort of the routing of our wireless network. I would create L3 SVIs (multiple in some cases) on all the switches that APs are attached too, and modify each Microsoft DHCP scope to point to whatever AP model was used and to point to the WLC. Now, what I'm unsure on, how would this behave with no Native Vlan/User Vlans configured on trunk ports pointing toward the AP. I was thinking of using what was once used at the Native Vlan (subnet info), and using that same subnet to create a IP routed port facing the AP and modify the AP IP via the WLC to select static assign. I can place IP helper addresses under the routed port to face our DHCP server (not sure if this really matters, if I already place them under the user L3 SVIs). Before, I had a DHCP scope for the native and user subnet. Would the AP still be able to connect to the WLC correctly, if I delete the scope (used before for the native vlan), since it usually resolved the WLC IP via option 43 (it can use DNS instead). I would imagine so, since I will be placing these networks under EIGRP to advertise within our Campus, which has L3 reachability to the WLC. And under the user subnets, I would still configure the Microsoft DHCP scope to face the AP model and controller IP. There just woundn't be a scope for the subnet that use to be for the Native Vlan. For any new set-up, I would pre-provision the AP under a user subnet access port, and then hard code it within the controller a static IP, to deploy later at the new site. For routed networks, are dynamic interfaces really necessary on the WLC? As long as L3 is working as intended, and the user switch has reachability to the Microsoft DHCP server, then users should be able to pull IPs fine through, correct? I've tested already with a PTP bridge we have, and hardcoded the ports to IP routed ports, and advertised it via EIGRP, and haven't noticed any issues with the customers pulling new IPs. I wanted to gather more information before deploying this for across the board to our other types of wireless set-ups. I'm not using FlexConnect. I've moved most of our 1552e APs over to local mode recently, which have wired connections to the LAN.

  • Wireless vlan on Dell powerswitch 5448 to ASA5510

    I am trying to create a wireless vlan on a Dell 5448 which uplinks to a subinterface on an ASA5510.  My issue is I can't seem to get the switchport to trunk correctly between the vendor devices.  Essentially I am trying to "fix" our wireless network that is bouncing since a new neighbor moved in with powerful RF signals in an already polluted space.  Any suggestions would be appreciated.
    Thanks!

    I have built an interface of the 2106 for VLAN5 and the interfaces for the 2106 and the bridges are built as trunks and all vlans are allowed. If I plug in a laptop on the 3560 in the new building, and the port is assigned to VLAN5, I get an address and can surf out just fine. I will scrub the 2106 & 3750 configs and try and upload them. To further test I moved the DHCP scope onto the 2106 and my wireless client is able to get an address from the 2106, I can ping the interface on the 2106 (192.168.5.2) I just cant connect to the 3750 switch.

  • Question about Wireless Design and Controller

    Hi Everyone,
    Although I am not new to Cisco, I have somewhat limited experience with Wireless in general.  I was hoping to get your help with the following:
    We currently have a total of 8 1130AG, 4 on each floor.  They were configured a few years ago, and now we are looking to update the design a bit.  Each AP has its own SSID, and just provide internet access.  Looking at the configuration, I noticed that they are not configured to use proper channels, just random channels (9, 10, 11, instead of 1, 6, 11, etc.).  I noticed that when I roam between one AP to another, I lose about 4-8 pings before I re-establish connectivity again.
    Here are my questions:
    1.  Do I need a controller in order to use just one SSID for the whole setup instead of the 8 seprate ones we currently have?
    2.  Will the controller helps in providing seamless transition when a client roams between AP's?
    3.  Is it normal to loose connectivity roaming around?
    4.  Can I reconfigure the current setup to use just one SSID and provide better transition between AP without the use of a controller?
    5.  Which controller would you recommend?
    We don't have a need to anything fancy ,I am aware that I can enable multiple SSID, VLAN's, etc.  Just trying to keep it as simple as possible, yet reliable.
    Your input is appreciate.
    Thanks

    1.  With 8 AP's only, a WLC would be nice-to-have but not necessary. You can configure WLSE and it will do some limited functions.
    2.  This depends on the signal strengths, wireless coverage and configuration.  If you enable WLSE, for instance, and you have no wireless black spots, then roaming should be no issues.
    3.  See #2.
    4.  You can configure multiple SSID (up to 16 are broadcasted) but if one AP doesn't have the SSID you use for roaming, the association will drop when the client tries to join that particular AP.  It's like mobile phone towers.  If your carrier is not in the area, you sure won't be able to use your mobile phone in that area.
    5.  For 8 1130 APs, I'd recommend the smallest of the lot:  2106 with either 6, 12 or 25 AP licenses.  I'd recommend you the 25 AP licenses.  If your finances allow you something bigger, then consider either the 4402 (25 AP licenses) or the 5508.
    Cisco 2100 Series Wireless LAN Controllers
    http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/product_data_sheet0900aecd805aaab9.html
    Cisco 4400 Series Wireless LAN Controllers
    http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps6307/product_data_sheet0900aecd802570b0_ps6366_Products_Data_Sheet.html
    Cisco 5500 Series Wireless Controllers Data Sheet
    http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html

  • Wireless Controller and security

    Hi,
    One of our companies is implementing a wireless network . We would like to do the following :
    - For conference rooms we would like to have a separate wireless network which has access to internet . All pc's that are not from the company should be able to connect.
    PC's that are from the company should not be able to use the wireless connection.This wireless network should be setup without authentication.
    - Secure wireless connection : Company pc's should only use the secure wireless network .
    I was thinking about using mobility groups but that doesn't block a company pc going to the unsecured wireless network and connect himself .
    I'm not an expert in wireless so hopefully I'm not asking a stupid question :-)
    gr
    wim

    You can use vlan override to allow certain ssid's on certain ap's. To block company pc's from accessing the guest network, you can either use a webauth and create a username and password that is only given out to guest and not internal users. Antoher way is to lock down the wireless through group policy.

  • Wireless modem and Airport Express.. one at a time

    Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
    I'm sure I'm just missing something in preferences or settings somewhere.
    Can someone point me in the right direction?
    Thanks, and Happy New Year!

    No ideas?

  • The Difference between Extending a Wireless network and WDS?

    I have an Extreme (n) and an Express (n).
    I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
    What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
    Message was edited by: J. Christopher Edwards

    I think you don't get it
    If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
    If one g device connects to the network will go in mixed mode.
    The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
    If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
    I can tell you that because I have actually implemented it am not taking off the documentation.
    The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
    In any case enough for this!

  • Suddenly My iphone 4s does not find my wireless printer and sometimes can't find the server.

    All of a sudden My iPhone 4s cannot find my wireless printer and cannot connect to the internet all of t he time.

    Hi dbutkow,
    If you are having Wi-Fi or network connectivity issues, you may want to take a look at the troubleshooting steps outlined in this article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Cheers,
    - Brenden

  • Wireless network and bluetooth not working on touchsmart 600

    This has not worked since day 1 and I have been using wired internet.
    I really need to setup a home network and need to use wireless.
    Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
    Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
    Please advise  

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Issues with Home Hub 3 Wireless. And lousy teleph...

    I don't know if this forum is moderated or followed by BT support staff, but I sure hope so.
    After coming from Virgn Media for my BB to BT infinity (Awesome speeds btw!) I'm pleased with the connection and, up until today, the support. I now have issues with my Wireless devices on the HH3.
    This is the outline of my setup:
    I have the Open reach modem connected to the home hub.  I then have the 1Gbps ethernet port from the home hub that is connected to a 1Gbps 5 Port switch that connects my wired network together (Consisting of my Xbox, Networked Printer and my Desktop PC).  Wireless serves 2 Laptops, an Xperia U phone, and a G5 Ipod touch (not all mine, I have a flat mate).
    My issue is that when more than one device connects via WiFi, the WiFi network has serious issues: The connections don't drop per se, but websites are not delivered, data transfer is intermittant at best - i.e. the WiFi network simply does not work.  When there is only one device, there is no issue.
    Now, being a techie (I don't mean to title drop, but I think it's important that technical support know that I know my stuff) I'm an electrical engineer (The graduate type) and I know my IT - so I have my own idea of what's wrong with this.
    Now, as my order was not completed until yesterday, techincal support couldn't/wouldn't help until today.  Yesterday, however, I spent hours trying to solve my issues and got as far semi-solving the problem.  I managed to get everything working nicely together when Wireless N is disabled and only a/b/g is enabled.  Great, but a main selling point is the Wireless N and I want to use this.
    So, today I phoned technical support.  I should also note here, and I made this perfectly clear with support, that when the WiFi starts to missbehave, the wired network still works perfectly and I have no issues with internet connectivity with any wired devices.  So, clearly this is not a line fault - it's on this side, aka, the router WiFi side where the problem resides.  Support decided to do a line test anyway - and of course it got the all clear.  He then asked me to reset the router (Yey, again after I had done it plenty of times before, only this time I had customised the SSID and the LAN IP addresses and now they need done again).  He then went on to state that I should receive an e-mail with instructions on what to do next, and if they are still issues to reply to a text message that will be sent.
    Duly, an email arrived.  It began with "Sorry you had to call us today about your wireless disconnecting. We’re pleased we could help you get it working again." and continued on with with this theme.  No, my problem is not resolved!  I phoned back, this time advising me to change channels, and check individual devices to see if they're any conflicts - I did this pretty quickly and disabled and re-enabled WiFi on my Laptop, phone, ipod and still to no avail.
    I have now been told that I will get a phone call between 3 and 3:30pm to see if the WiFi will settle down. huh!
    I don't mean to be such a pain and sound like such a git, but this is not an issue that I believe the technical support (via the call centre anyway) will be able to solve.  This is an issue with the HH3, mine at least, not being able to handle mutiple WiFi devices conntected simualtaneously - all but one on N, the other on G.  Now, I'm of the understanding that this shouldn't be a problem.  I'm sick of telephone support going through their script without listening to the whole issue either or beleiving that I spent a good 2 hours yesterday getting to the bottom of this.  I don't need line tests, I don't need resetting the router, I don't need changing channels - I've did all this!
    So it looks as though I'm stuck on HH3 in 'G' for now until we solve this issue.
    Further information: I'm using the type A HH3; again wired devices are not impacted in any way from this issue; I have tried multiple different channels; YES! I've reset the router and power cycled it; And this issue happens wether my WiFi devices are 1 meter away from the HH3 or 15 meters away.
    Could this be a bad HH3 or frimware issue? Can someone suggest something or highlight something that I've perhaps overlooked or missed?

    This is only a customer to custome help forum.
    This link may help, although some of the things you may have already tried.
    Wireless can prove quite unreliable, and an separate wireless access point can help.
    Wireless connection problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • New Mac Mini and 2006/2007 Wireless Keyboard and Mighty Mouse

    Will my old wireless keyboard and mighty mouse from 2006 and 2007 work with the new Mac Mini?

    Thank You!

  • C4580 All-In-One suddenly lost wireless connection and I can't get it back.

    I have a replacement C4580 after HP replaced the old one because of their dmaned regionalisation of printers.
    It has been working fine through my wireless router, and I have been able to use it wirelessly on 2 different laptops, one running  XP and the other running Win 7. both have the printer showing as USB and wirless, normally being used wirelessly. THhe USB is there 'just in case' like now apparently.
    It seems that my wireless printer has disappeared from my Printers and Faxes in the XP machine, so I try to add it again. Can't detect any printers, so when it asks to be connected via USB it appears to be going through the setup, then I get Error #201 VSA.
    Googled for an answer but haven't found anything useful. Seen a couple which suggest that the router is hiding the SSID (it's not) or that MAC filtering is being used. Again, it's not.
    I went to the Win7 machine, and it shows the wireless and USB printers (2 versions of the same thing) but when I attempt to print a test page tot the wireless version, it says that it has been sent, and I can see it in the printer queue, but after a while I get Error-Printing which in typical HP software is as usual bloody useless as it doesn't tell you why it failed, or where to even start looking to correct whatever error there was.
    I have altered nothing on any of the computers (knowingly, anyway) and both laptops communicate quite happily with the outside world through the wirless router.
    I really am getting rather pi**ed off with HP and their latest software. I had a PSC 1210 prior to this and no problems with it at all. The hardware seems fine but the latest software leaves a lot to be desired.
    Any ideas anyone, on what has happened here, and how it can be fixed - or do I just cut my losses and buy another printer, this time anything but HP - unless they're all doing the same sort of stuff.
    I have tried turning the wireless function off and then on on the printer, but also no difference.
    Additional info. As suggested in another post somewhere, I have done both a Network Configuration and a Wireless Network Test printout. The test report shows PASS against both Wireless On and Wireless Working, and FAIL against Network Name (SSID) Found, but then shows the Network Name (SSID) correctly under Configuration Summary!
    The configuration page shows Netwok Status as offline, and under 802.11 Wireless it gives a MAc address then Status as Disabled.
    I don't really know what it is trying to tell me?
    Oh, accidentally I printed 2 Configuration pages. On one it says that the 802.11 Status is Disabled and on the other it says that it is Disconnected. Unfortunately, I don't know which one was done first. The Disconnected one may have been done when I turned the wireless off. Nope, I just did again with Wireless turned on (at least the light is showing) and it still showing as Disconnected.

    Hi there KR,
    Sorry to hear the reset is not working for you on your PS C4580. The steps for the reset are all correct and should have worked if the printer is in good functioning order.
    I would suggest calling in to HP directly to see what your options are with them.
    If you decide to call them, this is their contact info:
    If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great Tuesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Have to "Set up Bluetooth Device" for wireless trackpad and keyboard almost every day

    Almost every day when I turn on my MacBook Air in my home office, my Apple wireless keyboard and trackpad do not automatically reconnect. They used to connect just fine when I was in the viscinity, but now (for the past 6 months or so) I almost always have to:
    Bluetooth > Set up Bluetooth Device
    Turn off the keyboard (hold down the power button for several seconds)
    Turn the keyboard back on (hold down power button for several seconds)
    Go through the setup wizard
    Repeat for the trackpad
    Things that don't work:
    Pressing the button on each Bluetooth device
    Restarting each Bluetooth device
    Turning Bluetooth on and off
    Setting the Bluetooth devices as "Favorites"
    Selecting the device from the Bluetooth menu item and clicking "Connect"
    Rebooting my MacBook Air
    Resetting  the NVRAM / PRAM
    Once the device is connected for the day, I do appear to be able to "Disconnect" and then "Connect" again from the Bluetooth menu item. The devices will also automatically reconnect by pressing a button on them. It just appears to lose the "lease" on them or whatever after a little less than a day.
    I'm trying to think of other troubleshooting steps I could take and it just occurred to me that I could try swapping them with the peripherals I use at work (which are possibly newer models, but otherwise identical). Any other suggestions?

    Huzzah! Less than 1 week after finally getting fed up and posting this question, I have discovered the root cause - my wife had been inadvertently stealing my keyboard and mouse connection whenever she turned on her laptop! She's using my hand-me-down MacBook Pro which I thought I had reset, but apparently it remembered its Bluetooth connections.
    I had suspected something similar since I occasionally used the wireless keyboard with my iPad, but had already ruled that out.
    I can't believe I figured this out after 6 months of mild frustration, but just days after posting this question

Maybe you are looking for