Wireless WRT160N Connection Error "Windows cannot validate certificate"

I installed and configured the WRT160N v.2 wireless router. My notebook running windows xp sees the network and has a good signal. When I try to connect, I get an error that "windows cannot validate certificate" or "validating identify". Does anyone know what the problem is and how to fix it?
Thanks...Rich

You need to change the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your new Wireless Network and attempt to connect...
If the above fails :
Please go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.Choose the Wireless Networks-tab and remove all the preferred networks from the list and click Add...Click the tab Authentication, in this window you have to choose Enable IEEE 802.1x authentication for this network and EAP type set to Protected EAP (PEAP?, now click O.k...
Try to re-connect to your wireless network, it should connect...

Similar Messages

I need help getting past the installation error "windows cannot fint TEMP file"

I need help getting past the installation error "windows cannot find TEMP file"

Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
http://www.compusa.com/products/product_info.asp?product_code=339900#ts
http://www.xpcgear.com/ide2sata.html
http://www.ubuyitdirect.com/-p-1045.html?currency=USD
http://www.satasite.com/sata-ide-converter.htm
http://www.pcgears.com/default.aspx?oid=187150

Re-installing windows 7 on L440 - Error windows cannot find .bat

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Hi,
I am trying to re-install windows 7 enterprise on brand new thinkpad L440 with an image from my company's SCCM server. I loaded the package on a USB stick. It was able to install T440P with no issue but I get the error ( windows cannot find bat make sure you typed the name correctly)
What is the cause of this problem. I need to rebuilt these machines ASAP but I am stuck with this error.

Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.

Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table. On EFI Systems, Windows Can Only Be Installed to GPT.
I found one solution to this problem on hp forum but my laptop has boot legacy and does not disable the efi boot order.
HP Model# HP 1000-1140TU Notebook PC
Serial# 5cg2481dbg
Product# c8c94pa#uuf
This is solution which is found on hp forum
SolutionThe resolution to this issue depends on the the hard disk volume size:
Follow these steps if the hard disk volume size is less than 2.19 TB:
Temporarily disable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
Select File > Save Changes > Exit .
Install the Windows operating system.
Enable the EFI Boot Sources setting in the BIOS:
Restart the computer, and then press F10 to enter the BIOS.
Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
Select File > Save Changes > Exit .
Follow these steps if the hard disk volume size is greater than 2.19 TB:
Install the HP BIOS Update UEFI utility from the HP Web site:
Click here to access the document "HP BIOS Update UEFI" .
NOTE:The HP BIOS Update UEFI utility is installed by default on some HP computers.
Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition.
Click here to access the document "How to Configure UEFI/GPT-Based Hard Drive Partitions" .
NOTEne or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside the HP Web site.

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Getting the error "Windows cannot find '-Xmx128m' "

Hi all,
When I try to I execute workbench.cmd, downloaded with OracleR TopLink 10g Release 3 (10.1.3), I am getting the error "Windows cannot find '-Xmx128m' .Make sure that you typed the name correctly...." .Further, my application is based on Java Swing and not a web application.
I made the following changes in the <TOPLINK_HOME>/bin/workbench.cmd file :
a) Set the 'JAVA_HOME' to the JDK path, same as that given in the
Environment Variables setting.
b) Set 'DRIVER_CLASSPATH' to point to
<TOPLINK_HOME>/jlib/classes12.jar.
My System configuration is as follows :-
Operating System : WindowsXP
JDK Version : JDK1.4.1
Data Base Client : Oracle9i
Data Base Server: Oracle8i
Can anyone please suggest any solution for this problem.I 'll be very thankful.
Regards,
Manju

Have you run across this thread while trying to resolve this problem - How to start Workbench (Toplink 10g) Not sure if it applies to your situation, but thought it might be helpful.
If this doesn't help, perhaps you can paste the contents of your workbench.cmd file into this thread and we can try to debug the issue further.
Neil

Powershot A4000 IS: My computer cannot recognize my camera when connected, saying "Windows cannot op

Powershot A4000 IS: My computer cannot recognize my camera when connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or corrupted". This a recent occurrence. I have reloaded the latest Camerawindow software to no avail. Any recommendations to solve this problem?
Solved!
Go to Solution.

Hi Tedson,
Because of the number of steps that may be involved, I recommend that you contact us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Reloading windows XP 6710b error window cannot continue

windows will not load on new hdd that test good no other hardware problems (windows error message .Windows cannot
continue connot find hard drive ect. ) bios setting may be wrong and preventing window from finding hdd ?
window XP home on a 6710b notebook. all hard test good.

You have mentioned it's 6710b Notebook and I am assuming that the exact model is HP Compaq6710b Notebook PC. It could be an issue with the BIOS settings.
Try the below mentioned steps:
1.) Put the Windows XP installation Disc in the NB's DVD drive and turn off the NB.
2.) Boot the NB to BIOS by tapping the F10 key continuously as soon as you press the power button to power on the NB.
3.) Once in BIOS, first go to Diagnostic tab and use the arrows keys of your keyboard to navigate. And check if the HDD is getting detected or not. Try running Primary Hard disk quick test and long test to make sure HDD is Good (If HDD is brand new then ignore the HDD test).
4.) Set the BIOS setting to it's default by tapping the F9 key once, save the Changes and exit.
5.) NB will restart by itself. This time tap the F9 key to change the Boot Sequence Order or tap ESC key to get the menu to change the boot order.
6.) CD/DVD rom drive should be the first boot device and then the HDD and then USB etc. Save the changes.
7.) when NB restarts, it will ask you to "press any key to boot from CD/DVD". Follow the Onscreen instructions and check if the recovery/Windows installation completes.
P.S : Make sure only Ac-adapter is connected to the NB and nothing else, no other USB accessories etc.
Any further issues, post it with the complete error.

Getting Error Windows cannot find Adobe Air installer

Trying to install Adobe Air. Installation file wont run. Get error when i run the file.
"Windows cannot find 'C:\Users\Matt\AppData\Local\Temp\AIR4654.tmp\Adobe AIR Installer.exe'. Make sure you typed the name correctly, and then try again"
I am trying to run the current version of Adobe Air from the Adobe website. Please help.
Thanks,
Matt

Still no luck cant play LoL...Was having an issue with a asus start up file what was in the TEMP folder also said not found....deleted a registry for it and that one stopped coming up when the computer started...but i still cant install adobe air.

DB Connect Error: Database cannot be reached

Hi All,
We are connecting an external database to BI system through DB connect.
The external database is now upgraded. So the connection parameters have to be changed for this database.
I have changed it in the BI system. I went to source system -> connection parameters.
There I have provided the DB Connection
DBMS
User Name
DB password
Conn. info
Connection Limi
Optimum Conns accordingly.
But still I am getting the error : Database cannot be reached upon checking.
According to my understanding the new IP of the database server has to be updated in some tns file.
But I am not sure where this file resides.We have updated the IP in tns file of database server.
For example my database server is 'X' and application server is 'Y', in which server the tns file resides and where should the IP be updated.
Could someone please guide me with this.
Regards,
Shravani Reddy

Hi Luis,
You need to activate ags_workcenter in SICF so that you will be able to access url http://><server>:8001/sap/bc/webdynpro/sap/ags_workcenter
Thank you,
Ice

FTP Error : Windows cannot acces folder ..... Details : Element not found

Hi All,
I'm just transferring to my new office that uses FTP as a means of storage for sensitive data. At first i can connect to ftp servers easily using windows explorer. But over time, when i'm about to connect to ftp server, the windows explorer replied
Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access this folder. Details: Element not found
I can access the ftp server using IE or another web browser, even using WINSCP and other ftp file transfer software. I need to be able to connect to ftp server using windows explorer again. Can any of you help?
The ftp.exe is not blocked in firewall rules (i've checked).
Any comments/helps are appreciated.

Hi,
Firstly, make sure you have enable "Enable FTP folder view (outside of Internet Explorer)" setting:
Internet options -> Advanced -> Enable FTP folder view (outside of Internet Explorer)
And then try use mapping network drive:
1.Click on Computer.
2.Click on Map network drive from the menu.
3.Map Network Drive window will open. Now click on the link
Connect to a Web site that you can use to store your documents and pictures.
4.Now simply follow the step by step wizard to add a new network location. Select
Choose a custom network location when given the choice of where to create this network connection.
5.Type your ftp address. Specify a user name and password if required.
6.Give your newly created network location.
Alternative, use the registry method that was marked as answer in the following thread to fix it:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/this-ftp-site-cannot-be-viewed-in-windows-explorer/e699d41e-98ae-48c1-9231-d570d46c0f38
Karen Hu
TechNet Community Support

HT4759 connection error windows 8

I get a connection error when I try to login to icloud on a windows 8 pc

iCloud Control Panel or iCloud.com.. check your Internet Security Settings

10.6.5 and Wireless printer connection errors

I have just updated both my iMac and Macbook pro to 10.6.5 and both now just show "connection error" when trying to print to my canon mp640 wifi printer.
Another macbook I have that has non-updated OS is still printing fine to the same printer so the network and printer are obviously all ok.
I have deleted printer and reinstalled new driver to no avail. Not sure what else to do from here??

You marked this question as answered with no one making a reply with any help. If you found the solution on your own please share it.

Wireless/Satelite Connection for Locations cannot receive connections?

MacBook -- I want a wireless/(satelite) connection that will allow me to connect to the Internet from anywhere. I do not want Airport...I am on the road alot...where in many places I can not pull a connection from near by places. I am looking for the most realible and inexpensive option for true wireless/satelite. I have found one card through Verizon (not bluetooth - Verizon Wireless V640) that costs $179.00 and $59/month through Verizon. Any gurus know companies that offer this for a better service/costs?

Welcome to Apple Discussions!
Verizon's is probably the most viable service for speed, and that's cellular, not satellite. Being cellular if you are out of the cellular provider's service area you are stuck with no service anyway. Satellite services require a dish which you would have to lug around at least as big as the Direct TV or Dish Network dishes, and would require a clear unobstructed view of the of the southwestern horizon in the U.S. In addition, the best dish services offer a modem that uses ethernet as opposed to USB. Whether or not the satellite services let you work from more than one location you'd have to take up with the satellite service providers.
Consider that many hotels now offer free WiFi internet access in the hotel, I would use http://www.jiwire.com/ to find out which ones do and try to stay at those hotels. Some offer the free WiFi in the lobby, but not the main rooms.

Window update will not run... error "windows cannot currently check for updates because the service in not running?"

i am running windows 7 64bit professional on an asus essentio series cm5675 i5 processor with 16gigs of ram
any reason or what is causes the update program/service to not run?

Hi, here is the report generated by the Farbar Service Scanner:
Farbar Service Scanner Version: 31-05-2013 01
Ran by Owner (administrator) on 02-06-2013 at 13:50:39
Running from "C:\Users\Owner\Desktop"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo IP is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
Firewall Disabled Policy:
==================
System Restore:
============
System Restore Disabled Policy:
========================
Action Center:
============
Action Center Notification Icon =====> Unable to open HKLM\...\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A} key. The key does not exist.
Windows Update:
============
BITS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Windows Defender Disabled Policy:
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1
Other Services:
==============
Checking Start type of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ImagePath of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ServiceDll of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
File Check:
========
C:\Windows\System32\nsisvc.dll => MD5 is legit
C:\Windows\System32\drivers\nsiproxy.sys => MD5 is legit
C:\Windows\System32\dhcpcore.dll => MD5 is legit
C:\Windows\System32\drivers\afd.sys => MD5 is legit
C:\Windows\System32\drivers\tdx.sys => MD5 is legit
C:\Windows\System32\Drivers\tcpip.sys => MD5 is legit
C:\Windows\System32\dnsrslvr.dll => MD5 is legit
C:\Windows\System32\mpssvc.dll => MD5 is legit
C:\Windows\System32\bfe.dll => MD5 is legit
C:\Windows\System32\drivers\mpsdrv.sys => MD5 is legit
C:\Windows\System32\SDRSVC.dll => MD5 is legit
C:\Windows\System32\vssvc.exe => MD5 is legit
C:\Windows\System32\wscsvc.dll => MD5 is legit
C:\Windows\System32\wbem\WMIsvc.dll => MD5 is legit
C:\Windows\System32\wuaueng.dll => MD5 is legit
C:\Windows\System32\qmgr.dll => MD5 is legit
C:\Windows\System32\es.dll => MD5 is legit
C:\Windows\System32\cryptsvc.dll => MD5 is legit
C:\Program Files\Windows Defender\MpSvc.dll => MD5 is legit
C:\Windows\System32\ipnathlp.dll => MD5 is legit
C:\Windows\System32\iphlpsvc.dll => MD5 is legit
C:\Windows\System32\svchost.exe => MD5 is legit
C:\Windows\System32\rpcss.dll => MD5 is legit
**** End of log ****

Wireless WRT160N Connection Error "Windows cannot validate certificate"

Similar Messages

Maybe you are looking for