Wireless WRT54G is not able to do wireless and setup menu is out of whack

Ok,
So I got a laptop with my new job and I figured hey I would love to surf the web wireless at home (laptop's wirelss connection works at work). I bought a Linksys WRT54G router Monday and attempted to replace my old trusty linksys 4 port BEFSR41 router that I've had since like 2000. The setup was incredibly easy and my desktop (which is wired) had internet. My laptop however still doesn't.
My laptop will attempt to acquire network address and Send packets but will receive none. I can view the wireless network that I set up but can't connect to it. So I went into the old trusty router menu at 192.168.1.1 and here's what I see. I see this both when using IE and firebox browsers on both my laptop and Desktop.
It appears my router is toasted? I've restarted it and reset it a couple times. Any ideas?
http://aow.nuclearfallout.net/Random%20pictures/broken%20router.JPGMessage Edited by lewdogg21 on 01-16-200708:17 PM

As the computer wired to the router is able to go online, make sure that when connecting wirelessly you are entering the correct encryption key. To verify the encryption key …..on the computer wired to the router …… open Internet explorer ……in the address bar type http://192.168.1.1 (default IP address). Leave the username field blank  and in the password type “admin” ( Default Password). When setup page loads fully click on the tab that says…wireless….. Check the wireless network name SSID......it should be the same name as that of your wireless network......just below main tab  wireless click on the sub tab that says wireless security. Verify the security key here. If you are using WEP security….make sure that you are enter the WEP key for connection and not the passphrase. 
U can also try changing the network name...wireless channel....security setting and then connecting to the new network from the wireless computer.
 Try upgrading the router firmware.

Similar Messages

  • Not able to see wireless in programs after installing Oracle9iAS Enterprice Edition

    Hello Every one,
    I have installed Oracle9iAS Enterprice Edition and able to create content areas and portlets. I want to make the portlets Wireless enable.
    I configured all the required files in appropriate oracle homes, but not able to access wireless site.
    I did not find the Wireless Edition in my programs.
    Can any one help me?
    Thanks,
    Sudhir

    U need to install the client seperatley. Once u install u will see portal-to-go unser oracle fow WindowsNT Option.
    Hope this helps,
    Ranga
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by John Sudhir ([email protected]):
    Hello Every one,
    I have installed Oracle9iAS Enterprice Edition and able to create content areas and portlets. I want to make the portlets Wireless enable.
    I configured all the required files in appropriate oracle homes, but not able to access wireless site.
    I did not find the Wireless Edition in my programs.
    Can any one help me?
    Thanks,
    Sudhir<HR></BLOCKQUOTE>
    null

  • I´m not able to stablish wireless conextion from Macs with Leopard

    Hi,
    I have a new AirPort Extreme 802.11n and I´m not able to stablish wireless conextion from Macs with Leopard.
    I´m following the manual´s steps to connect a Mac and it doesn´t work. Does it have to be with Leopard? Should I do something after updating to Leopard?
    Does it have to be connected to the Internet to work? What could be happening? Please, help.
    Thanks.
    Regards.

    I update my lap top to Leopard, and was having trouble getting a connection out from a router. I would connect to the wireless network, but never get beyond that. I never had a problem at home with the airport extreme.
    It should work. Have you been connected to a different network?
    Can you see the airport extreme name as an option?

  • Since I download the app «Rio de Janeiro Map» on my iPhone by wireless, I m not able to download it on iTunes.

    Since I download the app «Rio de Janeiro Map» on my iPhone by wireless, I m not able to download it on iTunes. It give me a very slow connection (less then 5bits /sec) with an average of 72 hours to download. How can I fix this. iTunes 10.5, iP 4.3.5. When I ty to cancel it, I m not able to do it. Any help please, cause it bloke my synce and froze iTune.
    Tx

    iPhone was hacked/jailbroken and through updating iPhone, it is locked back to the original carrier. Give your iPhone back, it is useless for you.

  • Hp office jet 4315 i am not able to print wireless

    I am not able to print wireless   Only when wired

    Hi,
    Waht do you mean by print wirelessly?
    As you may find by the product specification, it support USB connectivity only:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00615491&cc=us&dlc=en&lang=en&lc=en&product=113...
    Connectivity: Available USB port and USB cable for direct connection.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Epson Artisan 725 Arthic White - Not able to print wirelessly

    I just got an Epson Artisan 725 and I'm amazed with the quality of the print job the downside is that even tough I have already done all necessary updates I'm still not able to print wirelessly. When I try to ad it on my printer's list I can not find it! Also, I realized that the manual of the printer is really poor on explanation and it is missing information about it.
    I have a MCBP 15 running Mac OS X v10.6 wirelessly connected on a linksys router as the printer is also. The printer finds the wifi and connects to it susccesfuly but I still not able to find it!
    If somebody can help me I really appreciate it!
    Thank you in advance for any help!

    I'd suggest going to the Epson website and checking/downloading the manual for your model; when I set up my Artisan 810, there were specific instructions on how to install it (both wired and wirelessly) - the wireless install included steps such as connecting it via a USB cable first and then disconnecting the cable at some point during the install process. Also, I had to enter the printer's MAC address on the router's website - if your model is similar to mine, you can get the MAC address by checking the setup settings on the LCD panel.

  • Finder not able to view folders and files on EHD after updating to OS X 10.9.4

    I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
    Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
    All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
    Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
    I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
    Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
    Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
    iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
    iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
    directory: "/Volumes/HITACHI"
    attributes: avbstclinmedz
    modified: 07/10/2014 23:26:44
    Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

    Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
    It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
    One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

  • HT1296 Im not able to download movies and music purchased from my iTunes on my iPad iOS 6.1. The download begings to show and once the dowload appears 100% done, I get a message "unable to download". please help

    Im not able to download movies and music purchased from my iTunes on my iPad iOS 6.1. The download begings to show and once the dowload appears 100% done, I get a message "unable to download". please help

    You have to have an internet connection, either wireless or through a computer with iTunes.  When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6

  • BI Publisher - SuperUser not able to acces Roles and Permission Page

    I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
    But
    1. SuperUser is not able to access Roles and Permission.
    2. I'm not able to access the BI Answers Catalog.
    I also have a doubt about the BI Server Admin. Is it the RPD Admin?
    Kindly Help

    I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
    But
    1. SuperUser is not able to access Roles and Permission.
    2. I'm not able to access the BI Answers Catalog.
    I also have a doubt about the BI Server Admin. Is it the RPD Admin?
    Kindly Help

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Not able to open pdf and adobe reader on windows xp sp3.

    Hello,
    I am not able to open pdf and adobe reader on my windows xp sp3 computer. I have reinstalled adobe reader 11.0.3 twice, but, no luck. I would appreciate if you could help me in resolving this issue. Thanks in advance.
    Regards,
    Venkata

    You can try using this tool to first remove all traces of Reader from your computer:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • Why am I not able to mark "in" and "out" points in Final Cut Pro 6?

    I have a bunch of old tapes that I am trying to put on my computer.  I have Final Cut Pro 6 and everything hooks up nicely except I am not able to mark in and out points or use capture now.  Does anyone out there know why that would be the case?
    I appreciate any help I can get.

    What VTR? How is it controlled?
    What are your capture settings? Firewire Protocol?
    x

  • After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

    After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

    I had this same problem with what's app.  There is a new update for the app on the app store which is compatible with ios8.  Update the app, or delete it and re-add it.  I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

  • HT1212 my iphone'"s screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do

    my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do

    Sorry, there is nothing you can do.
    FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149.

Maybe you are looking for