Wireless WRT54G problems help please

A few days ago i set up a FTP server with my Wireless WRT54G V.3 wireless router. Then the next day i wasnt able to connect to it. I tried everything. But couldnt get it to work. So i just went into the router setting and put factory settings. After that, the router wasnt able to give anything that connects to it a 192.168.?.? ip. Everytime i connect to it i get an ip of 169.I tried everything... and then i thought to myself, i messed up my router. So then next day i got another used router from one of my friends... its a wireless WRT54G V. 5 and when i try to set it up.... I get the exact same problem =\..... anybody has any idea... ive tried calling linksys but i was on hold for like 40 minutes and i gave up..... can anybody help?

If you have an extra ethernet cable you may reconfigure the router manually. For step-by-step instructions you may check it out from homesupport.cisco.com. You may also download the setup wizard from this website.

Similar Messages

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

T60 -- Bad Wireless connection. Help please!

Hi Guys, my T60 has unstable wireless connection problem. I make sure the radio is "ON". It gets connected to the DSL network but it gets disconnected on and off ( the radio turns off by itself sometimes). Something wrong with my Intel PRO Wireless driver 3945abg? Can anyone guide me how to fix the problem??
Thank you!!
-meLittlebee

Hi there,
I'm having the exact same problem - installed the OS (Windows XP Pro) adding SP3 and updating all drivers.
Then I connect to the wireless whitout any problems. I go to sleep, and next day wireless don't work!
The Machine is a T60 2008-WGV. I have made a image of the clean disk with Clonezilla, and therefore I can restore the OS quickly to a working wireless, but I find it quite anoing to have a clean OS every morning, in order to use network.
anyone please?
Message Edited by denbert on 05-03-2009 09:47 AM

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

HT4587 I can't locate airport express icon in itunes to connect my remote speakers wirelessly, can anyone help please?

Can anyone help please? I am trying to connect my remote speakers to my i-tunes library using Airport Express. Everything is connected and working using mt OS device (Ipod Touch 5th Generation) that works fine. I have tuned on home sharing and it says in itunes preferences that I am paired but according to the light on the airport express base station I am not connected to my existing wi-fi network. I cannot find the itune airplay icon anywhere in itunes nor can I find the network link by hovering my pointer of the network connections as suggested in the instructions that came with airport express. Would apprecaite some help please you can give. - thank you.

hmmmmm.
i'm not trying to get rid of you here, but it might be worth also checking-in/reposting over at the Airport for Windows forum. when Airtunes things get sticky, i generally defer to iFelix or RJ in WI, and they spend a lot more time over there than they do here.
(traffic is so heavy in here at the moment that this thread might be buried out of sight before an AirTunes guru gets to see you.)
here's a link through to the Airport for Windows forum:
Airport for Windows

Wrt54gs problem URGENT PLEASE HELP

hello, i have had the wrt54gs for about 4 months and my internet has been perfect but about a few a days ago, when i play counter strike source online or anything else i get ridiculous lag and it not able to play (500-600 ping), i have not changed settings or anything. when i watch the network monitor it shows about 4-5 bars on signal strength and link quality but every like 30 seconds it says you are connected to the access point but the internet cannot be found then like 30 seconds later it goes back to normal.
i have upgraded the firmware of my router and linksys helped me change some of the settings on the router but nothing happened.
can you please help me
thanks
pete
Message Edited by Stelth2k1 on 10-27-2007 07:14 PM

If it's working well all the while and only have the problem recently, then I guess it can be the problem on Internet connection link, or ISP side.
Try to connect your computer directly to the DSL/cable modem, then play the game, see anymore lagging..
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

IPad 2 wireless problems - help please!

Hey guys, I have a 2Wire wireless and my iPad 2 can't access the internet even though it says it is connected and the signal strength is at the max. (3 bars).I already changed the wireless settings from WEP to WPA-Personal, but it still doesn't work. (The IP address under DHCP starts with 169). My iOS version is 4.3.5 (8L1)
Can anyone please help me? Thanks!

Hey guys (:
Thanks for the help! But now I have a different problem :/
Basically, when I connect to the wireless now all the details (IP address etc) are correct, but then they disappear after around 20 seconds. So I have to renew the lease and it comes back again, but disappears again after 20 seconds! I can't access the internet although the left hand bar on Settings tells me I'm connected.
Does anyone know why? I'm quite confused because I've been searching for help and haven't come across any other person with this problem yet ):

WRT54G Problem Update - Please help!!

I'm having problems again but this time I have an error msg in Vista that might help someone troubleshoot the problem with me (I know what the msg means but not sure why it is happenning). It reads:
"The IP address lease 192.168.1.100 for the Network Card with network address 00E0B8E6ABCA has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message).
Now I know that the DHCP server is my router, and I also know that the network card it is talking about that is being denied the network address is the card on my desktop. What I don't understand is first the lease time on that particular card still has like 2 days left on it, second, why is it that all I have to do is unplug the router then plug it back in and then everything is fine? After I plug it back in, I can go to the router setup page and see that it has assigned the very same address of 192.168.1.100 to the very card it has just denied the address to (or so the error msg in Vista says). Oh, the only part I have no information on is the DHCPNACK message. I have no idea what that is or where to find it/troubleshoot it. I would greatly appreciate any help anyone may be able to give me. Thanks in advance.
This is still the same problem I originally posted about. I updated it to include the error message from Vista.

Thanks Wizzard. I'll give that a shot and see what happens "in time". This problem only occurs once in a while, otherwise I'd be asking for help a lot more. At any rate, I appreciate the assistance. Oh, I'm assuming that this will work for any network card be it in a desktop or laptop. If I'm not correct, please let me know.
Thanks again

Router and Wireless Ps3 Problems. Please help.

well ok i had a previous router, wireless, and it work well with my ps3. Then i found out hey wait, my NAT type 3 is preventing me from playing with my friends. So i tried to fix it. Well something went wrong and my router just completely failed on me. So i went and bought a Linksys WRT160N. Bam it was amazing. My internet work on my ps3 and computer. But yet i still had a NAT type3. The only positive thing was i now had uPnP avaliable. So i went to try and fix my NAT type....then something went wrong again. Today i was opening the ports b/c someone said open your ports to change NAT 3 to NAT 2. Then all of a sudden i try my connection on my ps3 and it says Error 8013013E, cannot reach the access point. It wouldnt even get the Ip Adress. Everything is typed in right and the WPA security, but still cant connect to the access point. Plus if this helps, when i try to do the Wi-Fi Protective Setup, it says failed. I was thinking about just returning the router to its manufactured state but i dont know how. Any suggestions??

I think the ports on your router are not opened properly, that's the reason the NAT type on your PS3 is set to NAT3.
To make your PS3 work with your Router, follow the steps bellow.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter... Leave username blank & in password use admin in lower case...
On the set-up tab change the MTU Size to 1452 and click Save Settings...
Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 80 and End box type in 80, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in DEF, in the start box type in 443 and End box type in 443, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in GHI, in the start box type in 5223 and End box type in 5223, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
4) On the fourth line in Application box type in JKL, in the start box type in 3478 and End box type in 3479, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
5) On the fifth line in Application box type in MNO, in the start box type in 3658 and End box type in 3658, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
6) On the sixth line in Application box type in PQR, in the start box type in 10070 and End box type in 10080, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings
7) Now assign the given ip address on your PlayStation ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1...
8) Also assign the dns addresses on the PlayStation Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
9) Turn off your modem, router, and PlayStation...Wait for a minute...
10) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the PlayStation and test it...

J6480 wireless and network help please!

I have an officejet J6480 that has an error in printing system when printing wireless. Everything is configured correctly and my printer reads the router and connects. If this problem cannot be fixed, can i use an ethernet connection directly from printer to router and get it to work. I tried this but also got a failure to print message. Please help asap! Thank you

hello,
first, cancel the print jobs
then try to restart the print spooler of the computer (click start>run... then type services.msc)
look for print spooler in the list
right click on the print spooler and click restart
if that doesnt work, then do a partial reset on the printer
unplug the power cord from the back of the printer without pressing the on button
press and hold # and 3 and wait for 10 seconds
plug the power cord back
wait for the printer screen to lit up then release the # and 3
try to ping the printer
try to print a test page again
keep me informed..

Westell 7500 Wireless modem/router help please.

Hi, newbie here
I recently purchased a laptop for the first time in my life and I am trying to connect it to a wireless connection, which I have never done as well. I am using a Westell 7500 modem provided to me by Verizon. I did a bit of researched and apparently (if I'm correct) I don't need a wireless router or any other devices to get wireless internet.
If I am correct, I went to my modem's IP address and turned on wireless. I set up and changed the SSID and enabled a pass phrase, and I connected to the network at the bottom right. It connects, but there is no internet connection. What I mean by this is that it connects to the device successfully, but there is a triangular yellow warning sign with an exclamation mark on my internet bar at the bottom right and in my "Network and Sharing center" it says "no internet access."
Am I doing something wrong or do I need to buy an wireless router? Any help would be appreciated, thanks.

You do not need to buy a wireless router. the 7500 will do the job! I assume you have windows 7. OPen network and sharing center, manage wirleless networks, do you have any entries for your Verizon ISP? If yes delete the entry and go to step 2.
If no go to desktop and press f1 to bring up help - search for (Setp 2) "set up wirless network" and let us know if that works for you. Welcome to the forum
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Wireless WRT54G problems help please

Similar Messages

Maybe you are looking for