Wirelessly connecting HP Photosmart 7510 printer to 64-bit Windows 7 computer

I'm setting up a new printer, and I have never printed wirelessly before. The printer is connected to the wireless network, but the computer can't find it. The printer's wireless network test results show that wireless is working. When I install the HP photosmart software on the computer, and it gets to the "Network Check" window, it just stalls there without finding any printers. Obviously, the computer is connected to the wireless network because I'm posting this online. Seems like the problem is with the printer driver software? I also tried downloading the Home Network Diagnostic Utility. From there I was able to go to the printer page and print a test page. However, I still can't print anything from the computer. If I try to add a printer in the control panel, when I search for network printers the same thing happens. It just stalls there without finding anything. Using task manager to end the program is the only way to close the window once it gets stuck. Any ideas?

AN IMPORTANT UPDATE!
I had turned off my virus protection and firewall, and was still unable to connect to the printer, or ping it.
I could successfully ping the printer from my router, so I turned the router off and back on, re-configured the wireless setup on the printer, and I am able to connect and print again!
Even though I could connect the printer to the router, and all of my computers were connected to the internet, something on the router was preventing me from connecting to the printer that was connected to the same network.
So I've learned that I have a printer that works fine, but I own a crappy router. Hopefully this can help someone else.

Similar Messages

My new HP all in one computer was recently connected to our new Photosmart 7510 printer. It worked

I own a one month old HP Omni 220 PC (all in one). The operating system is Windows 7. It is connected to wi-fi network in the home. The Internet portion works fine. And, for about 30 days, it would print to our new wi-fi connected HP Photosmart 7510 just fine. Today, it will not print. Our other computers connected to the network print just fine. So, it's not the printer, or the wi-fi. Can you tell me what might have happened within my PC, and what I need to do to fix the problem? I tried restarting the PC, and the printer but that didn't fix the problem. There have been no recent changes to the software or hardware configurations.
Thanks,
Bill

you have to file the music file if you dont itunes cant play a file that does not exist. check the get info and look for the old music file on your old computer. Or do this http://support.apple.com/kb/ht4527.

After a network interruption, my photosmart 7510 prints pages with a "d" on them.

After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

Hi rosegirlmom,
Does this only happen when the router is reset?
Why is the router getting reset?
Have you tired using a different router to see if this stops the issue?
Restore Network Defaults:
On the printer control panel, touch the Wireless icon ( ).
Touch Settings .
Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
Touch Restore Network Defaults .
Touch Yes to confirm your selection.
Restart the printer, and then connect it back to your network.
You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
Let me know what happens?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

My HP Photosmart 7510 gives the error message: "No computer is connected." when I try to scan.

The Photosmart 7510 prints without any problem. However, when I try to scan, the error message: "No computer is connected." is displayed. My operating system is Windows 7 Professional, on an Hp desktop computer

Hi there jonathan46900;
Hope you are doing well;
try this article
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02963481&cc=us&dlc=en&lc=en&product=5070121&tmp...
This should help you fix this issue, please let me the outcome I will do my best to help you,
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Compatibility of using Photosmart 7510 printer with a Photosmart 7525 printer from the same computer

Before installing, registering, and setting up my new HP Photosmart 7525 I need to know whether I can keep using my 2 year old HP Photosmart 7510 and its software on my computer and whether this would cause a conflict. My 2 year old Photosmart 7510 works fine and I want to use the Photosmart 7510 and the Photosmart 7525 both from the same computer and network without conflict. And if a conflict would be probable, is it necessary to remove the Photosmart 7510 software before installing the software/drivers for the Photosmart 7525?

Hi,
You can install more than 1 printer to your computer. They will share few folders including HP Photo Creations product but they should live harmony together.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to print borderless 4x6 photos with the Photosmart 7510 printer.

I am unable to print borderless 4x6 photos with the Photosmart 7510 printer. There are no option listed for any size borderless printing when i choose the paper size and paper type. I am running Windows 7 Home Premium 64-bit.
This question was solved.
View Solution.

I found it. Once you hit print, click on the options link. It opens a separate window. In that window there are two links, one says color management and the other says printer properties, click printer properties. That opens a new window, in that window click the advanced button. That opens a new window titled HP 7510 Advanced options, under the printer feature section near the bottom you will see "Borderless Printing". Left click on that and to the right a drop down menu opens, select borderless, hit ok. After you do this, it will print borderless however you will still NOT see that option when you print, like you used to with the older HP printers. I couldn't find it in the help section, I just stumbled upon it, very frustrating! It will print borderless.

I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
please help!.. i shall be really thankful.
iPhone 5s, iOS 8

I have the same issue and it has to do with iOS 8.2
Apple, please mend this ASAP. Really stupid change since iOS 8.1
If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

How do I install a pdf printer driver on my window computer using create pdf

How do I install a pdf printer driver on my window computer using create pdf

http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html#main_adobePDF_desktop_printer

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

HP Photosmart 7510 printer wireless connection to Mac Book Pro

My new HP Photosmart 7510 wireless printer won't stay "connected" to my Mac Book Pro. Every time I try to print, it says it is "looking for printer" and "printer is disconnected." Sometimes it finds the printer and I get the pages, but several times, it hasn't found the printer at all. Thanks!

Hi there clhs,
Could you provide the community with a little more information to help narrow troubleshooting? How are we connected to the printer USB/Wireless/ethernet?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can't Connect Photosmart 7510 Printer to Wireless Network

This printer isn't new, but it's new for me (my mother gave it to me). However, I'm trying to set it up, and I can't get it to connect to a wireless network. When I go into the Wireless Network Setup on the printer, no networks are listed (even though several should be listed, mainly our home network). I tried entering the network information (name & password) manually, and it still didn't work. I've downloaded drivers and all, but I can't complete anything because while the printer is powered on, it's offline. I don't know if the drivers just don't work because I upgraded to Yosemite within the past few weeks (and the drivers are for the OS prior to that one), or what. I can't even begin printing because I'm dealing with this nonsense...

Did everything you said to do, and still had the same issue. The Wireless Network Test results say the following: WirelessWireless Working - FAILSignal Quality - Not Run ConnectivityConnected - Not RunDisconnect count total - 0Disconnect count (last hour) - 0Disconnect count (last 24 hours) - 0 NetworkNetwork Name (SSID) Found - Not RunOther networks detected matching your network name (SSID) - NoWireless Networks Detected - 0 SettingsPrinter Settings Consistent with Wireless Router Settings - Not RunNo Filtering - Not RunChannel - Not RunSecurity - Not Run

Unable to connect hp photosmart c4480 printer to wireless network

I just purchased a new laptop HP dv7-6169nr but I'm unable to connect to my HP printer Photosmart C4480. I'm connected by home linksys. I tried to set up connection by using "sharing" properties but I guess I must be doing something wrong because I'm able to find the printer but when I try to print, the computer cannot find the printer. Can anyone help me?

Hey there!
Do you have a different pc available? Or if you have a friend who has a laptop will do as well. Because that will answer your question if its an issue with your pc. If it doesnt work with the other pc and you've tried a diff cable, its a big possibility its with the usb port on the printer.
Now, if you dont know anybody with a diff pc, you might wanna check your firewall settings. Its also one reason why your pc cant detect the printer.
You can also disable the startup programs just to make sure its not an issue with any 3rd party software. Try to follow the steps in this link in how to disable them ( and make sure you re-enable them once your done )
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&la...
if one of my advice works or helped a little, you can click the *KUDOS* button on the left. thanks.
Disclaimer : Even though im working for HP, all comments and suggestions are my personal opinion. HP still has a process to follow. (But i hope it will help ü)

Using the Time Capsule to print wirelessly to HP Photosmart C4480 Printer

Does anyone know how to set-up the Time Capsule to make it print to a HP Photosmart C4480 Printer wirelessly from a Mac Mini (Mac OS X 10.5.8) and/or a MacBook Pro (10.4.11)?
I've tried everything, at least I think so. I followed the manual, the help from the discussion forums, from trial & error, and from the Apple Store Genius.

When you say hooked them up.. what do you mean? As a wireless printer it should connect by wireless as a client to the TC.
But if you use apple names it might get lost. I would recommend you set all the wireless names to SMB standard.. short no spaces pure alphanumeric in the TC.
Also you might do better locking the wireless channels.

Wireless connection HP Photosmart C4780

My HP Photosmart C4780 won't connect to our local wifi network. It was connecting before I did a system reinstall, but now I can't get it to connect and I can't find any connection wizards or settings that allow me to choose a wifi network for it to connect to.
I have it connected to an iMac on MacOS 10.10 via USB. I can print, because the MacOS loads drivers when i add the printer, but when I try to use the original HP drivers and setup wizards, they crash and won't run on my OS.
Please help. This is super frustrating!
LA

Hey @LaneAllison,
Welcome to the HP Support Forum. I understand you're unable to connect your HP Photosmart C4780 All-in-One Printer to your wireless network. I would like to help.
Currently, there is no HP printer driver made for Mac OS X 10.10 Yosemite that's compatible with your printer. If the printer was already connected to wireless, you could click here to complete the setup by way of an 'Apple Software Update.'
Since you're effectively lacking in wireless connectivity, there are two ways in which you can re-connect your printer to your network:
Software Setup
The simplest route, if you happen to have another computer (Windows XP up to Windows 8.1) is to connect the printer to that via usb and click here to download the HP Printer Install Wizard. You can use that utility to install the printer via usb and then convert the setup to wireless. With that new wireless connection intact, you'll be able to click here and complete your printer-to-Mac Yosemite connection.
If you don't have a PC available to work with there is another setup option available that might work. Try the following:
Ad-Hoc Network Setup
Access your printer's wireless menu from the front panel
Restore Network Defaults
Next, on your Mac, go into your wireless settings and choose the HP Setup network
Next, open up Safari (or another browser) and type in 192.168.223.1 and hit Enter/Return to access your printer's Embedded Web Server.
From there click on the Networking Tab and then click on the Wireless sub-menu heading
Next, click to run the Wireless Setup Wizard
This will allow you to manually connect to your wireless network. With that connection confirmed, click here to finish your printer setup on the Mac.
Let me know if you run into any issues in either setup method presented above - I'm always happy to help.
Have a great day and thanks again for posting in the HP Support Forum!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Wireless connection from photosmart C4380 to HP Pavilion Home PC A340N running XP Home 32 bit.

How do I get my printer to do wireless printing? What drivers do I need to install? Do I need to setup a network?
How do I get the printer to be set on "Direct?" How do I get the printer to have the same SSID as my router?
Presently, the blue wifi light is on, on the printer, so I know it is receiving a wifi signal, but the printer and router are not talking to each other because the printer will not print without the cable. Also will this old model of printer ever be compatible with windows 8.1? Or, my android phone-( using the eprint app). Need help...Thanks in advance.

Hi 2PHD-s,
I'm sorry to hear you are having issues putting your Photosmart C4380 onto your home wireless network.
I have included a document with detailed steps on how to get your printer onto your wireless network. By following the steps in the document the printer should be on the same SSID as your router.
The drivers for your printer for Windows 8.1 have been released now. If you are upgrading your current XP machine, I would recommend that you uninstall the printer before doing the upgrade. Once you have upgraded the computer to Windows 8.1 I recommend that you use HP's Printer Install Wizard for Windows 7 and Windows 8 as it will find the best driver for your printer.
For your question regarding printing from your Android phone, I have included another document about printing from your Android device with printers that don't have HP ePrint support.
Installing the Printer Software on a Wireless Network
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02283937
How Do I Find the Best Driver for My HP Printer in Windows 7 or Windows 8?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02681060
Printing from Your Android Device with Non-Web-Enabled Printers (No HP ePrint Support)
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03726451
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Wirelessly connecting HP Photosmart 7510 printer to 64-bit Windows 7 computer

Similar Messages

Maybe you are looking for