Wirelless connected HP All-in-one won't appear on any device

Hello, I have a strange issue regarding my HP Officejet 6700 Premium e-All-In-One. It's been working flaulessly since I bought it almost one year ago. It has no device connected by cable, so it's working entirely by wirelless and I've printed documents as from my laptop as from my android and IOS devices. The printer was always imediatly recognized on the network. Today when I went printing a document I wasn't unable to do it because the printer shows offline on the laptop and my other devices can't find it on the network. The printer itself shows it's online, the signal great, and connections tests I ran shows no problems. But still no device can find it on the network. I searched a bit here on the forum, tried some software, checked every option, every connection but the printed continues showing everything is ok and impossible to connect to. Not even the software HP Print and Scan Doctor was abble to solve the issue, because just like everything else it was unable to find the printer.
I could use some help here please...

Welcome to the Forums, tiago31088!
I came across your post about your Officejet 6700 Premium not being found on your network when you attempt to print from your devices. It seems as though the connection was lost. I am going to suggest following a few steps to try and get it connected again.
Please check out this troubleshooting guide: Printer Does Not Maintain Wireless Connection
I hope this helps you get connected again!
If you run into any other issues, please let me know and I will do my best to help out.
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam. About a month ago there was a paper jam, but was removed. It worked fine since then until yesterday. I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem. The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam." When the problem first started yesterday the message was that the printer was "Out of paper." I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out. Thanks for any suggestions!

Hi there pattimessick,
You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My 5250 all in one won't email with Windows 7

Since I installed windows 7 my 5250 all in one won't e-mail anything since I don't have WINDOWS MAIL ANYMORE, and it only gives you windows mail as the only option to email.
Anyone know how to correct this?

In the Start Menu, type 'Live Essentials', and open the option which says to go online to get Windows Live Essentials. This way, you can install Windows Mail.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

6150 All-in-One won't print black

My HP Photosmart 6150 All-In-One won't print black. There is a new black cartridge and all the other inks are fine as well. I've cleaned the printhead 3 times and all that printed was yellow. I then ran an alignment. The alignment failed, but it wasn't because of a paper issue. The manual says it could be that the printhead assembly or the sensor is defective. Is it worth getting that fixed, or should I just get a new printer? I've had this one for 8 years and it's worked great until now.

Hi , Welcome to the HP Forums! I noticed that your HP Photosmart c6150 will not print black. I am happy to look into this issue for you! According to this guide, Color Mix or Missing Colors on the Diagnostic Page, it states: Missing colors occur when the printhead nozzles dry out. Since you have tried cleanign the printhead multiple times, and the issue is still occuring, I would consider having the printer serviced/or replaced. Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best regards! “Please click the Thumbs up icon below to thank me for responding.”

Installed HP Officejet 4100 All-in-one does not appear in Control Panel printer selection window.

My HP Officejet 4100 Series 'All-in One' DOES NOT APPEAR in the Control Panel window even after several re-installs. The diagnostics indicate that the 4100 is not connected and dos NOT point to any path for a solution.
Attempts to download a current Driver, ( or re-load the 4100 "software" ), WILL NOT work because the 'help' page states the driver already comes with the 4100 software and therefore does not provide for any download update, (driver or software) for the 4100 printer.
I have reinstalled from the original Disk for the 4100 and also attemped install with Windows Update requested driver. Nothing works.

Hi there @Past77
Welcome to the forums
I read your message about your Officejet 4100 not showing that it's connected, and that you have attempted to run the Windows Update to see if that would help get the printer working again. You are correct that this model does not have a downloadable driver for Windows Vista, so your best bet would be to try running the Print and Scan Doctor tool, to see if it can kick the printer into gear and have it functioning again.
If the tool does not work, I would then recommend looking in to a printer upgrade. Consider giving us a call to see what your options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes to you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT2688 Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help

Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help please

I also have this problem, as does everybody else I know who has tried to use the video in icloud. As the original poster says, they can be uploaded, but will only play on the device from which they were originally uploaded, appeaering only as images which display an endless buffering symbol when "played" on any other devices with which the photostream is shared.
Has anyone been able to get this to work? And if not, why is there no acknowledgement from Apple that this bug exists and will be addressed in an update (now running 7.0.2 and still no improvement)? It was, after all, advertised as one of the attractive new features of iOS 7. So why the stony silence?

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

My iphone is not responding, while connected with charger only apple logo is appeared no any other response , what i have to do

my iphone is not responding, while connected with charger only apple logo is appeared no any other response , what i have to do

while connecting to itunes to restore, i am getting error. UNKNOWN ERROR 3194 WHAT I HAVE TO DO

HP 3510 all-in-one won't connect to wireless - MAC filter

I'm trying to set up my HP Deskjet 3510 e-all-in-one, but every time it tries to connect to my wireless, it fails and gives me an error saying it may be due to the MAC filtering on my router.. but there is no MAC filtering on my router! I even added it to the approved devices just in case. If I try to just set it up via USB, the software doesn't always respond to the fact that I've plugged my printer into my laptop. I'm on Windows Vista. TRIED the solution of unplugging everything, restarting everything, turning things off and on again, etc., the error never changes but I have seen for myself and had the internet company confirm that there isn't any MAC filtering on my router.

Hi,
Please enter your wireless router configuration and check what security type is configured.
May it set as WEP security?
If so, ensure the authentication type is set as Open or Auto, then try connecting the printer again.. HP printers does not support the Shared Authentication type..
Otherwise please clarify what security type is configured.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp all in one won't connect to my wireless

I'm having an issue connecting my Hp all in one to my internet. I changed my internet to Fios within the last few months. At first there was no problem then one day it was running slow so I disconnected it and now it doesn't recognize my internet name. I need to know what I need to do to have it find my internet connection.

Do not use WPS. It should be disabled in the router for security issues. Please explain your full network setup including all make and model numbers and how everything is connected.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Photosmart Plus B210a all-in-one won't display any networks in the list.

Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one.
First off, it won't connect wirelessly.
It won't display any networks in the list when searched for, it won't take my network details when I manually input them and it won't take any static IP address I've tried from other suggestions.
Secondly, the print quality is very bad. Streaks and fading are occuring and after using up 70% of my ink trying to sort it out through troubleshooting it's still bad.
It's extremely important for me to be able to have web access using the printer as all members of my household use it and it'll get fustrating having to car laptops and computers around to print.
Can anybody help at all?

Top line says "The wireless radio is not functioning. Contact HP support"
I take this as a very bad sign and needs replacing?
The tests I done produce streaks, fading and lines. I printed off two photos, one from a memory card and one from a scan. The memory card produced heavy blocked lines of color and the scan was just dull.
I'm using a Wanadoo Wireless Livebox and Windows 7 64 Bit
One other question... is this like a brilliant printer for photos mainly? I'm a Graphics design student and although my final prints are made from home I would like accurate and decent printouts for my portfolios. Should I keep this or go for another one with similar features and better print quality?

HP Photosmart C2780 All-in-one won't work with Image Capture

I want to use Image Capture as the scanning software but it won't connect to my scanner (HP Photosmart C2780 All-in-one). When I go to browse devices it shows the scanner but when i click on "Use Twain UI", nothing happens, and it is supposed to ask me if I want to connect. I believe that I have followed all of the instructions correctly but nothing is happening. Does the HP Photosmart C2780 even work with Image Capture? and if it does what am I doing wrong?

Install the HP Drivers from HP.
I installed V9.7.1 from the HP website:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55650-2 &lc=en&cc=us&lang=en&os=219&product=3204785&dlc=en
This provides 'Hp Device Manager' which will scan images or do OCR on text pages....

Canon MG2200 All-In One won't scan?

This is really frustrating me.
Originally, i had purchased a PIXMA MG2100 All-In One printer and it worked fine. One day, however, the scanner stops working. Next the printer won't connect at all, and after some e-mails with customer support they send me a PIXMA MG2200 to replace the other, which had some problem needing factory repair.
After uninstalling and re-installing the new one, everything seems fine until i see that the scanner still won't work. I've tried it on my desktop and laptop, but it gives me the same error that says it's warming up, stops, then there's a connection problem, the scanner might be off or busy, USB connection error, please turn off and try again and scanner will shut off...yadda yadda yadda.
I've tried re-intsalling the drivers, checking for error codes on the printer screen, buying a new USB cable, changing the nearly-empty ink cartriges to new ones -- nothing works. I'm tempted to just throw the thing away and getting a different brand. I really need the scanner for what i do.
Does anyone have any solutions to make the stupid thing work? I don't understand why it won't. My last hope is buying another USB because the first one i used ended up being bust. The second one worked but only for the printer. It's not old, i got it with the printer last time, but it failed to solve the connection problem.
I use Windows 7 x64 btw. Windows XP on the desktop.

I GOT IT TO WORK.
I don't know if this will work for you adriftwaterbaby, but i bought a new cord and made it autoscan while it was doing that operation stuff right after turning it on.
I tried it with the old cord, and if i scan while it's doing its business, it works.
This is really stupid, and i'm afraid i'm going to have to change brands next time i buy a printer.

All in One won't install with Windows 7

I have installed all the drivers for my All in One (Officejet 5610) however the printer itself won't connect and install. It goes all the way up to step 5/8, but then it just gives me an error. Please help!
PS: I installed the drivers using the Windows Vista disc included with my All in One since I figured it was the closest to Windows 7 in terms of Coding and Compatibility.

I mite help you in this..
Here a list of items what micosoft windows does not install...
as said in this list
sony vagas video editer
GTA 4
PHOTOSHOP PRO
Some printers also i cant not install brother to it
Most your problem is windows 7 it self taken out microsoft C++ 2005 redistributable
this software you must have so your installer can install products you need
im not sure you can try one of the items from micosoft
64-BIT DOWNLOAD
or
32-BIT DOWNLOAD
I can NOT say this will work for you
anyway i found window 7 to be not good os i also infrom them this as well...

Hp officejet j4580 all-in-one won't print from the internet.

My officejet j4580 all-in-one printer won't print anything I try to print off the internet, nor from microsoft word. I tried reinstalling, but it gets stuck at 94%, and it took almost 3 hours to get to that point. What can I do? My operating system is microsoft vista.
This question was solved.
View Solution.

Hi,
Here are a couple of things to try. I would first start with downloading and running the Print Diagnostic Utility. IF this doesn't clear it up, then try the document on Problems printing from the internet.
Print Diagnostic Utility
Problems Printing from the Internet
See if either of these help.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Wirelless connected HP All-in-one won't appear on any device

Similar Messages

Maybe you are looking for