Wiring of Sound Blaster Audigy 2
Hi all, just got my new Sound Blaster Audigy 2 ZS sound card from newegg.com, which came with no software or manual of any kind. A day before I went ahead and took out my old Sound Blaster Audigy , which was having problems; now the wiring is the same but I just need to know where what goes as I do not remember. for most part the wires that plug into the one labeled "SB 394", looks like it should be one single plug but it's a collection of 6 small labeled wires. Anyone who can tell me in what order these wires plug into the "SB394" slots? They are labeled, VG, VP, TBA + TBA- and so on.
nevermind
Similar Messages
-
Sound Blaster Audigy with 5.1 Speakers prob
I have 5. speakers with a sound blaster audigy sound card. I've installed all the drivers and additional programs but it looks like my 2 rear speakers are not working. I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't. In the surround mixer i tested the 5. and here are the results:
- Front Left (Sound: OK, Speaker: OK)
- Center (Sound: NO SOUND)
- Front Right (Sound: OK, Speaker: OK)
- Rear Left (Sound: OK, Speaker: NO - The sound comes from the center speaker)
- Rear Right (Sound NO - It sounds very strange... bearly you can understand the words, Speaker: NO - The sound comes from the center speaker)
The wired are set correctly i checked it and I dont know what it might be wrong. Drivers are ok and everything are installed. Help please."I thought maybe it was some kind of speaker problem but when i switched the 2 rear with the 2 front then the rear worked but front didn't."
Does this not indicate two of the speakers are not physically working? Or have a mis-interpreted? -
Creative sound blaster audigy 2 zs h
I have creative sound blaster audigy 2 zs card and a set of AV labs, amped 7. sound system speakers. i have 4 input wires to plug into the card and it only seems to have 3 output jacks. When i go and calibrate the speakers i am missing out on my two surround speakers. how should i be hooking these up. There is probaly a simple ansew to this but it has me stumped. help please
Please read Creative's speaker connectivity guide: <A href="]http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=787,E=0000000000070303557,K=54,Sxi=0,Question3 895=obj(3895): obj(3899))[/url] (Remove the space between ": obj", I wrote so cause I get a smiley otherwise:angry: )
As you will see in the article, the Audigy is fitted with two 4-pole connectors, which can carry 3-channels each. So you only need 3 wires for a 7. system, as you have 2 normal stereo plugs (3-pole) and 2 3-channel plugs (2*2+2*3=8). You will most probably need different wiring for your speaker system as it appears you have 4 stereo plugs.
Message Edited by alexs3d2 on <SPAN class=date_text>08-0-2005<SPAN class=time_text>:36 AM
Message Edited by alexs3d2 on <SPAN class=date_text>08-0-2005 <SPAN class=time_text>:37 AM
Message Edited by alexs3d2 on 08-0-2005 :39 AM -
pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bitscrewguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa -
Creative Sound Blaster Audigy ZS And Vista Driver installation prob
HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julienestebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA -
Vista drivers problems Sound Blaster Audigy 2 ZS Noteb
First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.
-
SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO
(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PMestebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA -
Sound Blaster Audigy 2 ZS Platinum Pro Ad_link Cable
Hi,? I have the Sound Blaster Audigy 2 ZS Platinum Pro and my Ad_Link cable has been damaged. I have contacted every on line auction house and everyone in and out of the United States and no one has this cable available. What I am looking for now is one of 2 things;? the specs of this cable (which is not listed in any of the documentation that came with the product, nor is it on the web-site, nor does Customer Support seem to have this information), or a comparable cable that will work in it's place.
Thanks for any help that anyone can offer.
A very frustrated,
JodyHi Joko,
Please check your private message. -
Can not detect Sound Blaster Audigy 2 on this sys
Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
Windows XP Proffesional SP2 32Bit
P4 3.0ghz
.25Gb DDR 400 Ram
Geforce 6800 Ultra 256Mb
Asustek P4P800-E Deluxe Motherboard
Creative Sound Blaster Audigy 2 OEM
PCTV Rave TV card
Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PMI am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
Setup will exit."
My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
Driver Provider: Creative
Driver Date: 23/06/2004
Driver Version: 5.2..444
I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
Anyone else getting this problem? How did you fix it's -
Need help fast just bought sound blaster audigy se c
Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...
Hi,
May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card. -
Connecting PCMCIA Sound Blaster Audigy 2 ZS Notebook to Onkyo HT-S580 Recei
Hi
I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop.
I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks.
The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White
The color on the Creative Card end are Center- Orange , rear - Black , Front - Green
There is color difference between these two ends . Is it advisable to connect these two jacks ?
Please recommend the suitable cable type and name for this connection
Thanksdilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM -
Hi,
I'm experiencing something that is annoying. I noticed it long ago and it continues happening even with all the updates installed:
Windows XP SP2
DirectX 9.0c
Drivers:
Control Panel, Creative SB Audigy 2 NX, shows 2004/04/9 for the windows driver.
Firmware: ..0509
I installed the latest drivers found HERE (http://es.europe.creative.com/support/downloads/download.asp)
called "Creative USB Sound Blaster Audigy 2 NX update .00.000" (4 Feb 2005)
EAX Console version: 2.07.0
What is the problem?
Well... I have 5. soundsystem, and I choose "Surround Stereo" in the CMSS 3D option.
Each time I shut down the sound card PRESSING THE BUTTON or either turn of the system, I have to re-click this option button.
This is, the system saves the settings correctly, and if I open the EAX Advanced HD again, I find it selected, but when I re-click it again, then the sound gets surround.
Hope it gets fixed, as its a very annyoing thing.
Thanks in advance,
PS: If this is not the place to put this, please tell me insted of simply ignoring it.There IS a problem with this. I have experienced it in two different configurations, and yes, I have everything updated. As you can see I STILL have the problem... (I don't remember when I posted the first post). I also contacted Creative Support, and although it being fast, they did not test it. I simply got answers once and again about unsinstalling the drivers and some other things on my computer and install again.
I don't know how to report this to a developer or someone who can take some minutes to test it and say "hey yes... it's true!".
The problem with this is that you DON'T notice it at all.. you hear 5., all seems OK, untill you re-click again the "surround stereo" option.. it's in that moment when you notice that the volume and the quality increases... I guess people is using their 5. like in surround but not at 00% quality.
Sad, but it's the way it is I guess...
Now this is my day by day... Plug the NX, open EAX, select surround... and if I previously used my headphones (on the speakers) I have ALSO to switch from 2 speakers to 5. and then EAX and surround (although it's always clicked...)
I'm not asking for help, or suggestions. I just want someone who cares at Creative to know about this... Well of course, if someone has a suggestion or can help in a way that can make me forget about opening EAX console... it's welcome.
Thanks again for reading or for any help.
Regards.
PS: I'm thinking on replying to creative again, but I guess I will get the same answer... -
Pin Specifications for Creative Sound Blaster Audigy SB1394
;Pin Specifications for Creative Sound Blaster Audigy SB394 I have a Sound Blaster Audigy SB934 CA000-IAF Creative Tech '0 AA299J basically a Sound Blaster Audigy Platinum (wiouth the front bay for conectivity.)? And since I dont' have the front bay for heaphone and mic conectivity I was wondering if there is a spec sheet for the 40-Pin conectivity that is used for the front bay. I was wondering if anyone could provide me with such spec sheet so that I can try to conect my frontal Intel board plugs for headphone and microphone (would like to use my headset.)
There are a lot of pins on the card and well only about 8 in the conector for the front plugs. So if any dev from the forum is reading this I would greatly apreciate it if I could use my front Intel sound plugs on this old model card.
Thank you for all your help.http://www.driverheaven.net/audio-general-technical-discussion/5279-creative-audigy-2-ad_ext-pin-assignment.html
That will help you with the pin assignments.......
And you can also try one of these to connect a lot more easily to your front panel audio jacks.......
www.x-tap.com
I used the above with four Audigy LS and SE's and it works a treat! -
Sound blaster audigy plat. EX
i recently bought a sound blaster audigy platinum EX(not the audigy 2 plat. EX)i was just wondering if the sound from this sound card is better then the on board sound of the k8n ne plat. i have a feeling that it is, i just want to make sure. also, has anyone had any problems installing this type of card and if so how did you go about fixing them? thanks
siruis,
go to the mixer settings and one of the sliders. the one
beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
hope this helps you.
john ( good luck ) -
Microphone on Sound Blaster Audigy Advanced
I have a sound blaster audigy advanced mb integrated junk () and a cheap labtec microphone. Why doesn't my microphone work in CS:S unless while ingame I unplug it then put it back in?
I think it's a software. I just ordered Dell E405 and upgraded to this option. However, the sound card in my laptop is a SigmaTel HD audio. There's no sign of any Creative Soundblaster in my laptop. If you're planning to order a Dell, don't upgrade to this option. Or if you really want to upgrade, make sure you talk to Dell IN DETAIL before you place your order.
GOOD LUCK
Maybe you are looking for
-
Can I download ebooks from Amazon to My Ipad?
I used my netbook to download kindle ebooks directly to my Kindle Device and would like to know if I can download those that are say that are available for Amazon or Apple? I know I can download to my PC and transfer to my Appile Ipad but I thinkk th
-
From 5MB/s to 0.1MB/s 3 weeks no change
Hi, I am connected to mawnan smith exchange in cornwall and my connection is EO or straight to the exchange, with no cabinet, though we are about 2km from the exchange. We have had 5 to 6MB consistently for a couple of years until 3 weeks ago when o
-
Function to download all the variants
Hi , Is there any function to copy the variants of a program to another. Regards Arun
-
30EA3 - Windows: incorrect "mydocument" path in File- Open dialog window
Hi, I have noticed this error in previous versions as well. On windows, users can change the default mydocument path. After the change, all windows file dialogues with the 'mydocuments' shortcut open the new, changed directory. In SQL Developer, the
-
I am stuck. I recently travelled abroad and changed the settings on my iphone. I thought that I had changed them all back but messages in my mail accounts show the titles but when I click into them the main message doesn't download. Is anyone able