Wirless connection so slow in vista

hi
i installed vista on iMac and using BootCamp then i installed the drivers with the Leaopard update DVD i got with iMac, but the internet speed through my wirless router is sooooooooo slow i cant say there is an internet even slower than dialup and it also disconnects, while when i run in leopard its ok, also when i use it with vista on other pc its ok so haw can i fix that ?

I don't have any problems with network speed in Windows Vista on my iMac. Do a traceroute to your router from the command prompt and check the speed:
tracert 192.168.1.1 (or whatever your router IP address is)
It's more likely a problem between Vista and your router. Make sure your router isn't assigning the same IP address to two different devices on your network. Also, I've noticed that Windows Vista will sometimes slow down considerably when it's updating, and it tends to do that soon after start-up.

Similar Messages

"Network disabled because Internet connection is slow"

I have both a Samsung Galaxy S3 and a new Samsung Tab 3. After a recent software upgrade, I was having connectivity issues to wireless routers. The message I got when connecting to a secure wireless network was "Network disabled because Internet connection is slow". I determined that I had no issues with either my phone or tablet on either an unsecure router (WiFi hotspot), or with any older router that broadcast WPA2 personal with either aes OR tkip security. I do have a problem with connecting to any new router that broadcasts BOTH aes and tkip at the same time. When I change the routers under my control to broadcast only aes or tkip, then I can immediately connect both my phone and tablet to the router. There are obviously a lot of routers over which I have no control, so this needs to be fixed. I am pretty sure that there is a problem with the latest Android software upgrade in this regard

I am having the same problem with my Galaxy 3S since the upgrade. Have searched for settings, etc. but haven't found anything I can control. My home network is getting 54.4 down and 5.7 up! Have had this issue nearly everywhere I am connected.
I think it needs a fix - noticed today that Verizon has doubled my DATA for free. May need it if this continues.

My browser takes minutes to open then when the tab is fully loaded it will start saying "Connecting" and slow down or freeze.

When I open my browser, it takes 3-5 minutes to fully open. When I get to a website, randomly the tab will say 'Connecting' and slow down and take 10-15 minutes to function or freeze completely. This almost always happens on sites that require Flash Player use. I have uninstalled and reinstalled my Flash several times. I've added memory, as someone suggested it was a memory issue. It's so frustrating, please help!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

More info,
I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
if so what is the name of it?
thanks

Need to switch off and on my apple tv v2 each time I want to connect my PC under vista

Hello
need to switch off and on my apple tv v2 each timeI I want to connect my PC under vista.
After that, everything is going well...
But it is not the best user experience ;-)
Any idea if this can be fixed ?
My PC is under Vista...
Thanks a lot

I'm having the same problem. It seems to have started after the most recent firmware upgrade. Does anybody know if Apple is looking into this? It's rather irritating to have to reboot the Apple Tv every time I want to use it!

Time Capsule (early 2009) since yesterday my wifi connection is slow

hello,
since yesterday my wifi connection is very slow. all my ios devices in the wifi network connect much slower than in 3g with sides and apps. my mbp is linked with the capsule with a cable. it worked fine for 2 years.
any suggestions?
thx
shortyjoe

Is the Internet connection of your wired MBP fine? If so, then the problem may involve your local Wi-Fi.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees. That will allow you to determine whether the problem is with low signal strength or noise.

New Iphone connected to my computer vista OS, says USB devise not recognised, New Iphone connected to my computer vista OS, says USB devise not recognised

New Iphone 5 connected to my computer (Vista OS) , computer says USB device not recognised, please guide

Have you installed the latest iTunes on your PC?
See here for remedies for this problem: http://support.apple.com/kb/TS1538

Flash 9 and 10 .as editor slow in Vista/7

I've posted an observation about this here that contains some tests about the CPU usage of the ActionScript editor in Flash 10.0.2. The problem is that the editor is slower than any editor I have used, including NetBeans which has the most active code coloring and code hints I have seen. And also, it's five times slower in Vista/7 compared to XP even when Aero is turned off. And I also have turned off all code hints and code coloring. Writing a quote letter (" or ') is especially slow and require a whopping 2Ghz (i.e. takes one second on my PC) in Vista, in a large .as file (500 rows or more), according to my estimates.
No other editor I have used (for example Visual Studio, DreamWeaver 8, TextPad or NetBeans) has ever come close to those numbers. Also, if all code hints and code colorings are turned off it should be as fast as Notepad, even for the quote letters which cause no coloring or other change in the document then. So it should take perhaps 2Mhz to write a quote letter, not 2Ghz.
I'm a long time C++, Java, ActionScript, Javascript etc developer and would love to know what your code is doing. Can an Adobe developer explain what the Flash text editor is doing and why it's five times more CPU intensive in Vista/7 compared to XP? (See the link in the first sentence of this message for more information.)
Best Regards
John

I've posted an observation about this here that contains some tests about the CPU usage of the ActionScript editor in Flash 10.0.2. The problem is that the editor is slower than any editor I have used, including NetBeans which has the most active code coloring and code hints I have seen. And also, it's five times slower in Vista/7 compared to XP even when Aero is turned off. And I also have turned off all code hints and code coloring. Writing a quote letter (" or ') is especially slow and require a whopping 2Ghz (i.e. takes one second on my PC) in Vista, in a large .as file (500 rows or more), according to my estimates.
No other editor I have used (for example Visual Studio, DreamWeaver 8, TextPad or NetBeans) has ever come close to those numbers. Also, if all code hints and code colorings are turned off it should be as fast as Notepad, even for the quote letters which cause no coloring or other change in the document then. So it should take perhaps 2Mhz to write a quote letter, not 2Ghz.
I'm a long time C++, Java, ActionScript, Javascript etc developer and would love to know what your code is doing. Can an Adobe developer explain what the Flash text editor is doing and why it's five times more CPU intensive in Vista/7 compared to XP? (See the link in the first sentence of this message for more information.)
Best Regards
John

Why is the same wirelles connection too slow for an iphone4 when it is quite fast to an iphone5?

Why is the same wirelles connection too slow for an iphone4 when it is quite fast to an iphone5?

You really have a question for iPhone support here, so I suggest that you post in the appropriate support area:
Using iPhone
The experts over there will likely suggest that you use the Apple Troubleshooting Guide for iOS devices, so you might want to work your way through that before you post in the iPhone support area.
http://support.apple.com/kb/TS1398

Connection speed slowing down/degrading

I have been on BT infinity for a 6 monthss now - I had alot of trouble with the home hub but relaced it with an ASUS DSL-AC68U which is great (latest firmware installed). However over the past month or so I have noticed by connection speeeds slowing - both up and down speeds. I was getting around 70000kbps down and 20000kbps up but this has dropped to 52/12 ish.
The router auto diagnostics is also reporting an unstable DSL connection.
it seems there is a connection problem or something has changed at the exchange...?

your connection time is only 12 hrs was that a manual reset or router dropping conenction
can you try quiet line test dial 17070 option 2 should be quiet and best done with corded phone
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Connecting to a Windows Vista share from an iMac

I just purchased the imac intel based pc and I am very new but a seasoned windows user. I connected my maxtor external storage to my imac but for the life of me cannot connect to a Windows Vista share. I keep getting a timed out message or I have the option of fixing or deleting the alias. It is a constant loop.
Has anyone done this successfully and will you share? I have turned on windows sharing in the system preferences. What else should I do?

I just figured it out myself.

DataSocket connection too slow

Hi everyone
Am using DataSocket server to communicate between various application over the network, some of the application are programmed using Labwindows CVI and some of the data acquisition application are programmed using Labview.
When the CVI application is started the DataSocket server is connected almost instantaneously, but the labview applications connect very slow almost takes a minute, and the DataSocket server hangs till all the connection are not established. the labview applications are running in embedded controllers NI PXI 8186. Am using 8 dataitems in each labview application and there are 4 such applications.
so when all of the application are started at a time the problem is more severe, can any one tell me how is that i can improve the connection speed?
Thanx for the reply.
regards
Arun

hi there
be sure to use the Open/Close Connection functions. see attachment.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
DSTP_IO_7.1.vi ‏24 KB

My iPad will connect to the Internet but my iMac keeps dropping the connection or connects very slow.

My iPad is working fine and connecting to the internet no problem. My iMac computer, when I check the system preferences and I go into network it says my network is working fine and I appear to be connected to the Internet, yet when I going try to go on safari it won't let me connect to the Internet or if it does the connection is slow. When I do manage to connect to the internet, the connection drops quickly. What do I do?

Please answer as many of the following questions as you can.
Are all network applications slow, or only some? If only some, which ones?
Is networking always slow, or only sometimes?
Disconnect all other devices from the network. Any change?
If you can connect to more than one network, are they all slow?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Boot in safe mode and test. Any difference?

My connection seems slow but I've no idea what its...

I'm on Option 3 - my connection seems slow. I was unable to use the speed tester on the BT site because the latency was too high. Are these results typical?
Below are my speedtest.net results from 2010 to now and my ADSL line status
ADSL line status
Connection Information
Line state
Connected
Connection time
0 days, 00:20:36
Downstream
21,344 Kbps
Upstream
1,159 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Fast
Noise margin (Down/Up)
2.9 dB / 6.5 dB
Line attenuation (Down/Up)
18.3 dB / 6.2 dB
Output power (Down/Up)
32.5 dBm / 1.7 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
4 / 0
HEC Errors (Down/Up)
14 / 0
Error Seconds (Local/Remote)
4 / 0
IP_ADDRESS
TEST_DATE
TIME_ZONE
DOWNLOAD_MEGABITS
UPLOAD_MEGABITS
LATENCY_MS
SERVER_NAME
DISTANCE_MILES
86.170.227.14
01/05/2010 20:37
GMT
1.27
0.32
57
Birmingham
50
86.170.227.14
01/05/2010 20:41
GMT
1.31
0.34
57
Birmingham
50
81.159.169.200
1/16/2013 1:08 PM
GMT
1.49
0.72
19
Sheffield
50
81.159.169.200
1/16/2013 1:14 PM
GMT
1.34
0.88
15
Leeds
0
109.151.198.84
1/16/2013 1:32 PM
GMT
2.28
0.97
15
Skipton
50
86.171.176.205
1/16/2013 1:37 PM
GMT
1.94
0.73
15
Kingston Upon Hull
50

The wholesale broadband test rates my speed today as 18.15mbps download and 0.86mbps upload. Ping 21.38ms. I've never seen it that high...odd
ADSL line status
Connection Information
Line state
Connected
Connection time
1 days, 05:02:32
Downstream
21,344 Kbps
Upstream
1,159 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Fast
Noise margin (Down/Up)
2.8 dB / 6.5 dB
Line attenuation (Down/Up)
18.3 dB / 6.2 dB
Output power (Down/Up)
32.4 dBm / 1.7 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
3392 / 0
HEC Errors (Down/Up)
21015 / 0
Error Seconds (Local/Remote)
798 / 0

Computer to Computer connection extremely slow

Hello, I am having the following problem. I set up a computer to computer network (Create Network...), with all the right sharing services open, no firewall. With one PB 15, I have this consistent behavior: when I log onto another machine (via "My Network" -- oh, what a bad name, that reminds me...I can't say), or another machine connects to it, the connection extremely slow. So transfering files can take forever. Furthermore, in most of the cases the only available protocol that is offered is FTP, not Appleshare. In most cases too, the connection is interrupted half-way.
Any suggestions? I tried all what I could think of. All machines run on 10.4.2, they all have Airport Extreme cards, updated with the latest software.
Best to you all,
l.

Try changing the advanced wireless settings.
Open the setup page of the router.
Go to wireless tab and click on advanced wireless settings sub tab. Change the beacon Interval to 75, RTS threshold to 2307 and fragmentation threshold to 2307. Save the settings. Go to setup tab and reduce the MTU size to 1365. Save the settings and power cycle the router. Now try on the wireless computer.
How many wireless computers do you have?
The speed is slow only on one wireless computer or on all the wireless computers?
You don't need to downgrade the Firmware on the router.
Download the latest firmware from the Linksys website and upgrade it on the router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure the router.

Wirless connection so slow in vista

Similar Messages

Maybe you are looking for