Wish list-Channel display, need more favorites, need easier navigation to delete and view
1) Whenever I change channels, I get an info overlay that shows time, channel, and brief info--it fills about lower 1/4 of screen and does not go away for 5-6 seconds. How to get rid of this display or display for 1-2 seconds so I can see what is on the screen. If I want to know what channel and info, I can always hit info button..........??
or allow a "display channel only" option in modes (e.g., show HD channels only mode) or allow as a setup option to reduce the footprint/area of this info
2)Re favorites and modes, allow more favorite lists and allow choosing which in modes function as above
3)Need better management options re choosing & deleting recorded program to get away from time consuming drop down lists and subcategories e.g. all recorded: alphabetically or by date
clickerman wrote:
1) Whenever I change channels, I get an info overlay that shows time, channel, and brief info--it fills about lower 1/4 of screen and does not go away for 5-6 seconds. How to get rid of this display or display for 1-2 seconds so I can see what is on the screen. If I want to know what channel and info, I can always hit info button..........??
or allow a "display channel only" option in modes (e.g., show HD channels only mode) or allow as a setup option to reduce the footprint/area of this info
If you hit the EXIT button on the lefthand side of the remote next to the circle of Arrow Buttons, it will immediately remove the info. There is a way to change the amount of time this info stays on the screen (I changed mine way back when I first switched to FIOS), but I don't remember how. Found it somewhere in the menu selections - I think for the remote or maybe the display sections. Anyway, it's in there! Hope that helps.
Similar Messages
-
I need any items added to a wish list to display alphabetically rather than randomly?
I need any items added to a wish list to display alphabetically rather than randomly?
If I want to carve off part of a library, I presume the way to do this is to make a copy of the library using PLM then go into iPhoto and delete what I don't want. The result is the carved off portion.
You don't need Library Manager to delete the portion you don't want.
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
If I want to merge two libraries, PLM implies that it will do this but will the Faces be merged too?
I believe so. -
I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?
That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.
-
Hi, I've been using the 3D function in PS, upgraded to CC2104 and it was disabled (need more VRAM). I then reinstalled CS6 and was able to use it for a day and now, today, I am getting the same message I got with PS CC2014 saying my VRAM is too low again. I'm in the middle of a project that needs to go live tomorrow. HELP!!! Please.
Photoshop requires 512 Meg of VRAM or more to use the 3D features - that's been the same for version 14 (CC) and now 15 (CC 2014). Check Help->System Info to see how much your card says it has.
-
I tried downloading aol 10.0, but that caused alot of problems on my computer so I had to uninstall it.
Add to Amazon Wish List extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/52659/
http://www.mozilla.com/en-US/firefox/ <br />
'''Firefox''' is the name. ''Foxfire'' is a bio-luminescent fungus. <br />
[http://en.wikipedia.org/wiki/Foxfire_(bioluminescence)] <br /> -
Hi There,
I tried to download some software for my Powerbook and a window opened and said not enough memory. Where do I go to buy memory? I want to buy the Apple Word Version and update to Leopard but don't know if I need to buy 2 or 4GB or MB. What do I do? Do I go to Crucial or NewEgg? My budget is kinda limited as I'm a student currently. My CPU speed is 1.33 GHz, I don't know if you need more info. Thanks in advance for your help.Nina:
So what brand memory do I buy and where is the most reasonable & reliable place to buy from? NewEgg or Crucial?
The PowerBook G4 behaves better with optimal quality RAM. This module from Crucial is what you need.
Can I install it myself?
Yes, you can with these directions from iFixit.
And will 1GB be enough memory for Apple's Word and Leopard?
It should. When you have installed an additional ! GB module you will have a total of 1.25 GB. That should easily be sufficient.
Don't mean to bombard you with so many quest. ;)*
My pleasure.
cornelius -
My wish list wont preview any more
Itunes wont let me preview any songs in my wish list and it no longer has the scrolling in the wish list.
Hey CharlesCarson,
Thanks for the question. I understand that your iPod nano seems to not shuffle anymore. To troubleshoot this issue, let’s follow the five “R’s” of troubleshooting:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks,
Matt M. -
Getting error -1202 when trying to connect to 'My Wish List" in ITurnes. Says there was an error in the ITunes store and to try again later. Have no other problems connecting or purchasing......
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
Hi
i am an android app developer and new to ADF Mobile , so there are some doubts on Navigation through pages and mapping the new AMX page to features.
Steps i have followed
1. i have created an project using Mobile Application (ADF)
2. right clicking on ViewController , i have added AMX page and added some componets
Now i just want to show this page while executing this application in mobile. i have added this page path in to feature also but i am getting a blank screen.
please give me solution or give me a good example or any link which will help out.
i have added a button in the first screen and i want to go to next screen if the user press it. i know that task flow will help to achieve this but how i will add this with page. i am bit confused on those topics.
Thanks in advanceHi Ansh
Thanks for the reply
I have followed the same link and created a sample app and i am facing some error, error given below.
jdeveloper 11.1.1.6.0 Warning 'http://xmlns.oracle.com/oracleas/schema/11/
if you have any solution for this , pls revert.
Thanks in advance -
Need help writing script to have dbms_stats delete and collect schema
I am working on a script to collect stats for Oracle 8i with dbms_stats.
Since the bug in Oracle 8i requires me to first delete stats for all tables in the schema and
then to re-run dbms_stats to collect the stats, how can I write a script to do the cleanup and collection stats process for Oracle 8i on Unix?
ScottSomething like this (Linux) :
$ cat stats.sh
. $HOME/.bash_profile
ORACLE_SID=orcl; export ORACLE_SID
echo "Deleting statistics..."
sqlplus -s "/ as sysdba" << EOF
exec dbms_stats.delete_schema_stats('SCOTT');
exit
EOF
echo "Gathering statistics..."
sqlplus -s "/ as sysdba" << EOF
exec dbms_stats.gather_schema_stats('SCOTT',cascade=>true);
exit
EOF
$ ./stats.sh
Deleting statistics...
PL/SQL procedure successfully completed.
Gathering statistics...
PL/SQL procedure successfully completed.
$ Change .bash_profile with .profile if you are using korn shell or bourne shell. -
HELP| i need more transitions (mac)
hey
whats up ?
first of all - great forum !
i started to make a short clip in premirer pro CS5 in my mac (6 min)
and now - i have problam. i need more transitions (the same like premiere elements, and more)
but i dont have idea from where download !! or how install this....
i will very glad if someone can help me ..... it's very very important.....
thanksss
omerFirst, there are Transitions and Effects on the PC, that do not exist on the Mac. This LIST is from CS4, but will give you an idea. Not sure why it is so bad, when viewed in a browser, but you might want to open it in PS, or another image viewer.
With PrE, there are NewBlue FX Transitions, that are not in PrPro, for either platform. I do not know if NewBlue FX work on a Mac.
There are also many Transitions available at several 3rd party sites, like Pixelan, ProDAD and others. Again, I do not know about X-platform compatibility.
Is there a particular Transition, that you are looking for?
Good luck,
Hunt -
I need more disk space. Can I delete CS5 and LR4 now that I am running CC?
Sure. Just be aware that you may need to reinstall CC due to shared components possibly being removed by the old uninstallers. Though, to be honest, those 2.5 GB won't save your bacon if you are already short on space...
Mylenium -
I just purchased the new iMac. Need more firewire connections
24-inch, 2.8Ghz 2GB Ram. It's a great computer. Only thing is I need more firewire ports for hard drive, scanner and M-audio interface. We can't plug them in all at once. Any solutions out there? I wasn't impressed with the Apple Store's Belkin Firewire Hub. I could use an extra port for my ipod too.
What is the best solution?
Message was edited by: Maureen W.Do any of your devices have multiple firewire ports so that you can daisy chain them? My external hard drive has two ports and happily works in this fashion allowing additional devices on the chain. I have not noticed any difference in speed.
-
Scott Kelby posted his wish list for LRv4 on his blog today pointing out features, adjustments and tweaks he would like to see in the next iteration of Lightroom ....
http://www.scottkelby.com/blog/2010/archives/11824
Is he on target? Are his suggestions worthy, important and doable?
I must say I wouldn't be disappointed with his vision of what LR4 would be capable of ....Personally, I'm on a pretty different page.
I could care less about Lightroom's slideshow capability - because I don't use it (I use 3rd party presentation tools after exporting from Lr).
I could care less about Lightroom's photobooks - because if I did use photobooks, I could do it in Aperture or some other 3rd party software.
I could care less about soft-proofing because I don't use it, and if I did, I could always pull the photos into another app that does support soft-proofing.
... I could go on, but my point is that anything that can easily be done at the endpoints of the workflow with another tool is less of a concern to me than the things I do day in and day out, which is Library + Develop, especially Develop.
And Adobe still has some serious image quality matters to address, e.g. Highlight recovery.
I would agree with Scott on these points:
- Networked catalog support (although I don't have need, I understand other peoples need for this).
- Soft-proofing: this is not a contradiction - I acknowlege other peoples strong desire/need for this.
Other stuff I don't use but would imagine becoming big:
- GPS/Location support.
My wishlist:
- Finish what they started being #1 image-quality-wise
- especially highlight recovery
- and other hue shift anomalies.
- Finish what they started being #1 performance-wise (read: get the bugs out so the performance for "all" of us matches the performance for the lucky ones).
- Add better color handling and/or adjustment capability.
- Better auto-tone and Active-D-Lighting-like support (fill-light + clarity goes pretty far now, and jjust fixing highlight recovery would be a huge step in the right direction here).
- Fix 'Clarity' so that one can down-throttle its affect on "already high-contrast" edges.
- targeted adjustments (based on luminance, color, ..., e.g. U-points only better)
- includes making the auto-mask work better.
- all adjustments available locally.
- Separate channel levels and curves.
- distraction removal brush (e.g. content-aware fill).
- Support for image enhancement via plugin. - once pixel manipulation is integrated with parametric editing (see my #1 wish below) - this will be a fallout - I don't care too much whether image manipulation tools plug into photoshop or lightroom, as long as they are readily accessible in Lightroom without forking a separate photo.
- Full-screen editing with develop panels + library panels simultaneously open on secondary monitor.
- Full access to Lightroom UI via SDK (plugin) - including event notification and having things in the panels.
AND MY #1 WISH FOR LIGHTROOM 4:
- 100% integration with Photoshop and/or other 3rd party pixel editors and plugins - this would include the ability to have multiple shots be considered sub-shots of an HDR image. - If this were done, it would lessen many of the needs for natively supporting things like separate channel levels and curves and all adjustments local. To reiterate: the main goal is to be able to do things presently relegated to pixel editors without forking a new photo, even if internally its handled as a fork - I don't want to have to manage an additional independent photo entity just to remove a twig.
I'm sure there's more, but I gotta go dance...
Rob -
I usually only read these forums through the Newsgroups interface, in which case you don't see any explanation of or introduction to new sub-forums. So I visited the forums' web interface and read the introduction. Here are my comments:
> Welcome to the FrameMaker wish list area. Here, you can make your
> suggestions for improvements and new features to be added to FrameMaker.
>
> Please note that this is a user forum and there is no guarantee that
> anyone from Adobe will read this forum. To make a feature request
> directly to Adobe, please use the company's feature request form at:
> http://www.adobe.com/support/feature.html
>
> Discussions and comments are encouraged. The spirit here is to make
> suggestions to improve the product, not for rants or vents. As such,
> inappropriate messages will be moved or deleted.
If the intention is to simply discuss possible improvements and their
merits with your fellow FM users, fine. But I would guess that many
people posting here would assume that this is a forum for getting feature
requests sent to Adobe, directly or indirectly. Especially if you don't
use the web interface or don't read the introduction quoted above.
In that case, I have posted my opinion on such postings in the previous
"wish list" thread, and I won't repeat it here again. I just encourage
the forum hosts and other forum participants to keep an eye of the
postings here and make clear that this is a user-to-user discussion
forum, nothing more (if that's the intention).
If the forum hosts intend to actually collect and summarize these
postings to Adobe R&D or product management, please make that clear.
I really think this affects the type of "requests" to post here, and the
spirit of the following discussions. In my opinion, it may be hard to
combine a true "feature request forum" and a more free "discussion of
merit forum" into something truly useful.
/Thomas Michanek
FM user since 1990Thomas,
>I usually only read these forums through the Newsgroups interface, in which case you don't see any explanation of or introduction to new sub-forums. So I visited the forums' web interface and read the introduction. Here are my comments:
Unfortunately, the forum software doesn't send the forum description
through the nntp: channel.
I am aware of your sentiments on the "Feature request" issue, and I do
make the marketing and product management and support folks at Adobe
aware of these forums at every opportunity.
Adobe already has a direct route for feature requests (as indicated in
the forum description) for all products. Any of the Adobe product
"Feature Request" forums are in the same spirit as this one - it's
just that some Forums have more active participation of Adobe
employees (on their own time), but that doesn't mean that nobody from
the FM team will read these postings. One can hope that some ideas
here will strike a chord and be acted upon.
Please also don't discount the various plug-in and script developers
that may pick up and run with any of the ideas presented here to
provide all of us with something to enhance the product or our
workflows.
All I hope for is that we can make the best of the opportunities that
are presented to us.
Arnis Gubins
Forum host
Maybe you are looking for
-
i have a requirement compare the data from two dso can we add both dso fields in one querry and create a report?
-
I got a new laptop and when I sync my itouch only purchased music where transferred to my iTunes
When I tried to sync only music purchased through Itunes was transferred. All the music from CDs where not!. I couldn't backed up my itouch because my old computer crashed. And now my itouch has only about 200 songs which is not even the same numb
-
Creating a dialog box with OK and Cancel buttons without OADialogPage
Hi Experts, i want to create a dialog box for Delete Confirmation means after clicking on delete it should pop up a small dialog box with OK/Cancel buttons and need code for the same to handle the buttons. i have created with OADialogPage but its sho
-
Error thread java : problem with the function "resume 0x***" (forum sun)
One problem with the function of jdb occured when I tried to use it to pilot the processor with differents threads. In fact, I use a simple example with 2 threads. I stop the two threads with two breakpoint, and I want to resume one or the other (wit
-
How can i have a free apple ID ?
Hello Everyone , i need a help please How can i have a free apple ID ?