Wish to add / delete auto-programmed channels on model 24L4200U

I wish to add / delete auto-programmed channels on my Toshiba model 24L4200U so that only my favorite programs scroll via the up-down toggle on the remote. This function is usually part of the set-up, but I cannot find it after scrolling through all menus. The instructions packed with the TV don't cover this topic, nor is there a manual available online for this model (too new?).
This seems like a simple task, but I am stumped ... hope there is a simple answer. Thanks!

I had a hard time too. Go into the Setup menu, then Installation, then Channel Options. Check the first column for channels you wish to skip.
Found that answer in the manual here:
http://cdgenp01.csd.toshiba.com/content/support/manuals/userguides/su3310573/GMA300009011_L5200U-L42...

Similar Messages

Deleting auto programmed channels

i have a ct90325 remote for my 32c110u tv. i am trying to delete auto programmed channels from memory

Setting channel skip
To prevent certain channels from being viewed,
channel positions can be skipped.
1無 From the Setup menu, highlight Installation and
press .
2無 Press p or q to select Channel Options and press
. The list of channels will appear.
3無 Press p or q to select a channel position to be
skipped and press . A will appear in the
box.To remove the , press again.
To add a channel to the channel memory:
Highlight the checked box next to the channel number
you want to add, and then press to remove the tick.

Adobe flash does not work on bootcamp windows 2002 xp. down loaded to windows. works with Mac. No program folder for such. shows up in "add delete programs" (in setting) but without a file size. I have a MacBook Pro purchased new in June 2010.

Using bootcamp (windows 2002 xp) I down loaded adobe flash player from the windows platform. told me it installed successfully. however does not work in windows, does works in mac. in xp there is no created program folder for such or created short cut. In the control panel (xp) in add/delete programs it is listed but wihout any file size or frequency used. I've deleted & reinstalled numerous times. Mac OS is 10.6.8. Windows is 32 bit. Can't find a thing that discusses this. THANKS!

I just now posted it Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913
Adobe Flash Player 17.0 - Bug 3973913

I install all ADD-ONS and i want to remove it from my browses to be back as standard firefox browses i try to delete the program and re download it but it's return with all ONS please help

i install all ADD-ONS and i want to remove it from my browses to be back as standard firefox browses i try to delete the program and re download it but it's return with all ONS please help

http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How do I add/delete programs that open on startup?

how do I add/delete programs that open on startup?

Also, Lion starts any open apps on a restart or boot automatically unless you uncheck this option when shutting down.

Script to auto zero channels in a TDM file with multiple channel groups

Hi friends,
I am trying to process some data but am having trouble modifying a script to autozero channels across multiple channel groups. The following script works to zero channels across one group. I use this script to process data in a TDM file with only one channel group. I need to be able to zero channels across multiple groups (5 groups). But the amount of groups I will have may change so I might need an option to enter the amount of groups or have the script determine the amount of groups in my TDM file.
Here is the code I use to zero the data. Thanks in advance for your help!
Sub UserDlg_Select
Call USERDLGINIT()
USERDLGCAPTION="Auto Zero Channel Based on Specified Points "
USERDLGTXT(5)="Number of points to Average"
USERDLGCOMMAND(5)="t1"
Call USERDLGOPEN()
End Sub
Call UserDlg_Select()
T2="1-"&T1
For I= 1 To ChnNoMax 'For all data channels except time
T4=CHNNAME(I) 'Create string for Channel name (I)
T3=ChnDim(T4) 'Create text variable for channel dimension
STATSEL(6)="Yes" 'Arith mean
STATCLIPCOPY="yes"
STATCLIPVALUE="No"
Call StatBlockCalc("Channel",T2,T4) 'Calculate Stats for Channel (I)
'Subtract Mean of first (T1) points for Channel (I)
Call FormulaCalc("Ch('temp1') := CH('"&T4&"') - statarithmean")
CHNCOMMENT("temp1")=("Channel zeroed over first "&T1)+"pts" 'Add Comment
ChnDim("temp1")=T3 'Add Dimension
CHNNAME("temp1")=T4+"-Z" 'Save updated data with -Z
'Delete Stat Channels
Call CHNDEL("ArithmeticMean")
Call CHNDEL("Sum")
Next 'End For loop

Hi rvillalta319,
Sounds like you'll need to adapt your code to use both a for loop and some implementation of the GroupCount variable (or ChannelGroups.Count) as seen here:
http://zone.ni.com/reference/en-XX/help/370858K-01/varoff/groupcount/

How to remove Java Applications from "Add and Remove Programs" list?

I have deployed my Java applications (both JWS and Applet) via JNLP with allow-offline option enabled and without installer-desc option specified.
My questions are:
1. An entry is added to the Add and Remove Programs list after launching the application via JNLP. Is it due to the specification of JNLP or JWS? Is there anyway to prevent this behavior?
2. I removed my application by clearing the cache via Java Control Panel but the entry for the application is still listed in Add and Remove Programs. How can I remove the entry in the Add and Remove Programs?
I have tried following methods but neither works:
1.Go to Add and Remove Programs, and click [remove] button to the right of my application.
*Warning message like 'Application cannot be uninstalled completely' is thrown.
2.Follow instructions listed @ [Microsoft Online Support site|http://support.microsoft.com/kb/314481/en-us] to remove my application manually via Windows registry.
*Couldn't find appropriate registry entry to delete.
Thanks in advance!

Hi, guys!
This issue has been officially approved as a new bug (Bug Id: 6946221) for the JDK 1.6_20(might include any release below) release.
It will take a couple of days for it to be shown up in the external Bug database. However, once it becomes available for viewing on external Bug database.I would like to encourage your valuable participation to vote on this bug to get it fixed ASAP by the SUN developer teams.
Java Bug Database @
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221]
Voting for the bug @
[http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221]
Thank you for your cooperation!
Edited by: Jay-K on Apr 23, 2010 12:14 AM

Add/Delete elements from viewcontaineruielement in web dynpro abap

Dear all,
Please let me know how to Add/Delete elements from viewcontaineruielement in web dynpro abap? I have copied a viewcontaineruielement from another program and now i dont want few elements from that viewcontaineruielement in my view. Please guide

Hi Ajinkya,
I have copied a viewcontaineruielement from another program and now i dont want few elements from that viewcontaineruielement in my view. Please guide
Have you saved that VC element as template and using that template in another component?.If so,on resuing that VC element template it populates all the screen elements which you've save as template.
Now, select that VC element which you've re-used,based on you're requirement add/remove UI elements as Kiran suggested.
Hope it will resolve your issue.
Thanks
KH

I updated Fox fire and I have lost the add on auto dial .. I have tried to redown load the add on and it does not appear on my menu bar..

I had the add on auto dial then there was a Firefox upgrade and auto dial disappeared from my menu bar. I have tired to redown load auto dial. It says that it will be added when I restart Firefox. I restart in auto dial does not reappear.

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

Best way of deleting unwanted programs

I have downloaded some programming software that I was using on my Mac for some time, but have since decided I don't want it on my Mac anymore. Because the programming is in Java, it also downloaded very confusing Java add-ons and saved certain projects I was working on. I am confused with whether there is a way to delete the programming software including anything that is attached to it, or whether I have to delete manually and risk deleting important Java software.

If the software has an uninstaller, use it. Otherwise, see if the installer package has a bom (bill of materials) which shows where all installed files are stored.

Add/delete row in JTable

I went through the tutorial of JDK about how to programming JTable, i can NOT find a way to add/delete row into/from JTable.
I immagine it would be a difficult task because the data set it takes 'Object data[][]' is NOT dynamically grow/shrinkble.
Can we make it take ArrayList[] as input dataset so that the dataset can dynamically grow/shrink?
Any other way around to add/delete row?
THANKS for your consideration.

You have to write your own TableModel like extending AbstractTableModel. In that class add custom methods to add and remove rows. From those methods call fireTableRowsDeleted(..) and fireTableRowsInserted(..) to update UI.

Deletion Utility Program for Sales Order.

Hi Experts,
We decided to have a deletion utility program for Sales orders.
The program should take sales order numbers from a source file, and delete one by one, also the program should generate process log details at the end.
For creating the above program i need to create a new program or there is any BAPI for deleting the Sales Orders.
Thanks & Regards,
Ramana

Hi,
Possible UPDATEFLAGS:
BAPISDH1X-UPDATEFLAG = 'D'.
U = change
D = delete
I = add
If you go to SE37 give BAPI_SALESORDER_CHANGE --> Display ---> In application tool bar Last Buttion Function Module Documentaion --> Here you get some usefull information.
Dont Change the BAPI Just pass the Header X = 'D'.
Try this Sample Program.
PARAMETERS: p_vbeln TYPE vbap-vbeln OBLIGATORY.
DATA: i_hdrx TYPE bapisdh1x.
i_hdrx-updateflag = 'D'.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      salesdocument     = p_vbeln
      order_header_inx = i_hdrx
    TABLES
      return            = i_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
LOOP AT i_ret.
    WRITE / i_ret-message.
ENDLOOP.
Thanks,
Durai.V
Edited by: Durai V on Aug 19, 2008 8:22 AM

Can not delete 2 programs---HP smart webprinting 4.60, and, Shop for HP supplies.

How can I delete these 2 programs? I got rid of the other HP programs but I can not make these programs go away.
HP smart webprinting
Shop for HP supplies
I am trying to get rid of them by using (Add or Remove Programs) on my laptop running XP.
Thanks in advance,
Noseythefox

Hey ShankyHP,
Let's see if I can answer some of your questions. Great questions by the way!
As long as you get a drive that is the same heigh as the drive that comes with the unit, it should fit in the existing carrier. So, in this case, any standard 9mm drive should work. The Maintenance & Service Guide contains instructions on how to swap drives.
I'm not exactly sure what you are asking, since there are no 250GB or 500GB options listed for this unit on HP Shopping.
Upgrading the graphics card is not supported after the unit is built.
There are a few different Wi-Fi modules used for the system, depending on the configuration, however all of them operate at the 2.4GHz band. The theoretical maximum speeds are similar between 2.4GHz and 5GHz, however 2.4GHz typically provides you with much greater range (distance), while the 5GHz band may be less crowded (if near a ton of wireless networks, like an apartment) but with less range.
Currently, an extended battery is not available for this model, but in the future it may be available. However, the standard battery is measured to last for 5 hours on this model.
The 17t-j000 does include an HP TrueVision HD Webcam, providing 720p video - it must just be a typo like you said.
Hope this helps! That is a fantastic unit, and we hope you enjoy it! Please let us know if you have any more questions.
I am an HP employee.
• Say thanks by clicking the 'Thumbs Up' button on the left
• Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

Can't add or remove programs from dock

I suddenly have a problem where I can't add or remove programs from the dock. When I try to drag a program icon to the dock it won't stick to it and shows a "+" next to it in green. When I try to drag an icon off the dock it shows a shadow of the icon that won't go away. I tried making a new user and the same behavior occurs in that user. I tried finding my com.apple.dock.plist but couldn't locate it. I was able to find com.apple.dockfixup.plist and tried deleting that but it didn't help. Any recommendations on where to go next?
Thanks

Thanks, I will try this when I get home today. However, the fact that the problem was not corrected when I made a new user makes me think that deleting this file from my user Library folder may not correct the problem. Any other suggestions if deleting the dock.plist file doesn't work?

PAPI-Add/Delete/Retrieve BPM Instance's data and attachment for an instance

Could you please me tell me how to Add/Delete/Retrieve BPM instance's data and attachment for a new as well as running instance using PAPI. Is it possible to have
a sample code.
Thanks,
Ben.

Hi Ben,
Start with this thread that shows you how to create a new work item instance in a process and pass in input argument variables to the new instance as it is created:
Creating a new work item instance in a process using PAPI
Here's a thread that shows how to retrieve variables from an instance:
Re: Instance info using PAPI in studio
Here's a thread that shows
1. how to run an activity in the process and pass in arguments using the "runActivity()" method,
2. How to run a Global activity and pass in arguments (runGlobal() and
3. How to send in a notificationto a notificationWait activity using the "sendNotificationInstance()" method:
Re: Acces Oracle BPM Process through Standalone Java Program
Finally, you can use the session.instanceAttach() method to attach a file to an instance.
Hope this helps,
Dan

Wish to add / delete auto-programmed channels on model 24L4200U

Similar Messages

Maybe you are looking for