Wism and RF Group Problem

We have on Wism version 4.0.155.5. We configured one RF group name for two controllers in the wism and use auto-RF. The problem is each controller can only see itself in the RF group and consider itself as the RF group leader. My understanding is each one should see two controllers in the RF group and only one should be the RF group leader. Where could be wrong?

I posted the following in your other thread:
Do you have APs on both WiSMs yet? They will only see other RF group members that have APs associated to them. I had the same issue, but when I moved 1 AP to each WiSM the RF group came up as expected.

Similar Messages

WISM and RF Group

We have on Wism version 4.0.155.5. We configured one RF group name for two controllers in the wism and use auto-RF. The problem is each controller can only see itself in the RF group and consider itself as the RF group leader. My understanding is each one should see two controllers in the RF group and only one should be the RF group leader. Where could be wrong?

I may be wrong on this, but I believe the RF groups are actually determined based on what the radios can hear. So an RF group is created for each group of isolated cells (i.e. group of AP's that hear each other within a coverage area).

Keywords and Quick Group Problem

I recently installed iLife 09. I now can't drag keywords out of the Quick Group window into the Keywords window. But the reverse does work. I was able to freely move keywords back and forth between these 2 windows using the last version of iPhoto (in iLife 08).

This is an issue introduced with version 09. As of now there is no solution.
iPhoto menu -> Provide iPhoto Feedback
Regards
TD

AAA, WLC, and AP Groups, Anchor Controller, Problem

All,
First, I have a TAC case open on this problem, but they seem to be stumped and I have been unable to get them to mock it up. Here are the details and the problem(s):
Have Cisco ACS using backend AD for user authentication
MSCHAP, 802.1x
Three wireless controllers running ver 7.0.98.0; one controller is 4404 the other two are on WiSM blade in 6509.
Many AP Groups and a few mobility achor setups.
Wifi clients used to test are Intel and have the proper drivers 12.4.4.5 and 13.1.1.1
First authentication problem is via SSIDs associated with anchor contollers. Whenever the SSID is set to use 802.1x, the anchor controller sends message to ACS(RADIUS), but ACS never sees the communication.
Second authentication problem is related to AP Groups. Whenever a client associates with an AP that is in a specific AP group and that SSID is also associated with that AP group's interface, I get the same result as above - the contoller talks to the ACS, but the ACS never sees the communication.
Note that all the above works fine as long as I am not using 802.1x. If I am using PSK, it all works flawlessly.
One other thing to note is that, in the case of the AP Group problem, if withing the AP group I associate the SSID with the management interface, the 802.1x works perfectly. The problem with that is that the client get assigned an IP address from the management Vlan... not what I want, instead, I want the client to get it's IP address from the interface associated with the AP Group.
It is not a routing problem....
I have gone through two TAC engineers and the problem is still not resolved. So close, but not succesfull.
Any interoperability/Security experts out there that can help nail this thing?
Thanks

Jeff,
Sorry for the late reply.... of course your suggestion was right-on the mark and a wireshark trace uncovered the problem. I had already re-engaged Cisco TAC and between the wireless engineer and one of their security engineers, they were able to point out that the Cisco ACS 5.0 has a bug specific to this particular problem. They told me to apply patch, apply OS upgrade, then apply ACS 5.1 upgrade to the ACS. I was able to apply the patch, but never could get the OS upgrade to take. For the heck of it, I re-checked the problem after applying the patch and YooHoo! Works as advertised!
Thanks for showing the interest, it was definetly a pain-point for my customer.

Iphone and droid group message problem

I recently got the iphone 6. I have a group text comprised of iphone and non iphone users. If the discussion is just between the non iphone users the messages send properly (as a sms). However, when an iphone user responds it automatically converts to iMessage and non iphone users stop receiving the group txt. HELP!?!?!

I had an iphone 5 and switched to Samsung galaxy S5 in August 2014. Went through all the processes of de-registering number with apple imessage and had no problems with getting group messages from iPhone users. Then, about beginning of January, no longer could receive group messages from my iPhone friends. A couple have upgraded to the 6 but others had not. I have a pending case with ATT support, worked with Samsung support and did a factory reset, still no fix. I had two of my friends turn off iMessage today and send the group text, guess what? IT WORKED. So I totally agree, something has happened, maybe with a recent iOS update, not sure. But, they cannot send me group texts with iMessage turned on. Need help because I cannot afford to switch back to iPhone just so I can group text, but I'm getting left out of important information and events. VERY FRUSTRATED!!!!!!

WiSM and 4404 problem

Have a Wism configured to be the primary controller however all LAP's seem to register to a seperate 4404 on the newtork. HAve rtied many things to rectify but to no sucess. Any ideas anyone
cheers

A couple of things, one build the mobility group between the two devices, and once they join, set the Primary and Secondary Controller addresses on the AP's individually, or through a template in WCS if you have it.
If you are providing the management address via Option 43/DNS, the AP learns about all the controllers in the mobility group, so if you already have the mobility group built, the AP is learning about the WiSM and the 4404. It then will unicast each controller with discovery request, and the AP will decide on which controller to join.
Generally if I want all my AP's to join a specific controller I will set that one as Master Controller Mode to on, and when they have joined set the Primary and Secondary. If you do not set these variables, then the next time you set a different controller to Master Controller Mode, your AP's could move to that controller.

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How do I restore my tabs and tab groups after an update to version 36.0?

I work with many tabs when I use Firefox. I keep them ordered in Tab Groups, which helps separate the different kids of work I do and interests I have. I have been using this environment for years. When I started my work today, Firefox updated to v36.0, and the following behaviour was noticed:
1. There is only one tab group when attempting to show Tab Groups in Panorama, as opposed to around a dozen;
2. Normally though the hidden tabs (the tabs in the same group as the startup group and not the default page) don't download content until clicked, the name of the page and icon, if available, will show on the tab. Presently, the tabs show "New Tab" and no icon. There appears, however, to be the number of tabs that exist across all Tab Groups but now are ghosts this one, default Tab Group. I'd have to add, though, I don't count the number of tabs, so I can't be exactly sure. When clicked, there is just a blank page. So it is odd that Firefox knows they are there but cannot simply attach the address to it.
I have tried to restore the following files from my Windows Home Server backup to the AppData\Roaming\Mozilla\Firefox\Profiles\<gobbletygook>.default folder:
1. In the sessionstore-backups folder, I replaced the previous.js, recovery.bak and recovery.js files (not any of the upgrade~) with files from yesterday and from two days before.
When that didn't do anything, I replaced
2. sessionCheckpoints.json
I didn't see any file with a recent date that appeared to be one that I should restore. I should add that I do see hidden files. I thought about restoring the whole lot, but wasn't sure how this would affect the program on v36.0 and the profile files on 35.0.1.
I have deadlines this week and need to immediately restore my environment in order to make those deadlines. I have no list of addresses to my Web pages to work in IE or other. Any help would be very much appreciated.
On a second note, I had been wondering recently whether this tab group environment is a suitable way to maintain my work environment. Occasionally, when opening Panorama, I would get an error saying a script is taking too long, but if I clicked Continue, it would display the groups in a few seconds. I had considered putting all of it in Bookmarks though it would be tedious and more difficult to access and open multiple tabs. In the beginning, I tried Tab Groups thinking it was a simple matter of maintaining a table of addresses (in tabs) with a tab group ID or name. How could that go wrong? Well, it has, so it is obviously more complicated than that, and I didn't realise that upgrades would affect personal data. Should I abondon using tab groups?

With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
# close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
# check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
# if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
# check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
# At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
# When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
# Open Firefox. Mine opened up as desired.
This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.

How do I resize pinned tabs/deal with tab group problems in Firefox 22?

With the automatic update to Firefox 22, my pinned tabs have ballooned in size; not only does this look horrible, but it reduces the real estate available for other tabs. While NoSquint has sorted the issue with websites randomly resizing themselves, everything else (add-on menu, toolbar icons) has also increased in size, which affects what can be displayed.
Another problem with 22 is that my tab groups are no longer behaving normally: I click on one group and another group moves around the screen, typically jumping behind the original group I clicked on. Any suggestions for how to improve these problems are much appreciated.

hello, firefox 22 is now respecting the pixel density you've set on a system level in the windows control panel > appearance > display. more information about that is availbale at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller
if you want to set the text size/pixel density in firefox different from that of your system's settings like it was handled in prior versions, enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''. double-click it and change its value to '''1.0''' (or any other zoom factor that fits your purpose; 0.8 equals 80%, 1.15 is 115% and so on..., -1.0 is the default value and will adhere to the system settings).

DataLoad into Write-optimized DSO with DTP and semantic groups

hi gurus,
i'm going crazy with my current problem.
i searched in the other posts of this topic, but i did not found a solution.
here my situation:
i created a w-o-DSO with semantic key (0ucinstalla, 0calmonth, zbelnum, 0unit) and three key figures.
now i'm loading from several cubes data into the DSO. (i need the historical data)
in every transformation, i implemented an expertroutine which collects the data into the result_package.
in the routine, i even clear the record number before collecting the result_rows.
in the DTPs, i'm using a semantic group for 0ucinstalla in order to select all rows for one 0ucinstalla into one data-package.
each DTP has to run one time in full mode.
but when i schedule the third DTP, i get the message: "duplicate record"
i checked the active data in dso. there was no record with that semantic key.
i found a record with the same 0ucinstalle for a diferent month - in my opinion, thats no duplicate record...
is there a dependence between semantic key in DSO and semantic group in DTP?
how can i solve this error?
regards,
philipp

Hi,
thx for your fast replies!!
@ Passing by:
I know the option "Do not check uniqueness of data".
At DSO do not arrive any duplicates and i would like to use the check of uniqueness in future, if there really arrive duplicate records.
@ Durgesh Gandewar: thx for the hint, but i also checked this website...
Regards,
Philipp

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Not able to use Shift field and Shift Grouping field while using OPK0

Hi,
I am using the SAP ECC 6.0 Enhancement Pack-4,
In Transaction 'OPK0' while confuguring the default value for shift in the *Default* Tab, i am getting the 'Shift - field:SHIFT_PROP('Proposal Shift for Single-Screen Entry') and Shift Grouping, in Display mode, i have also tried to configure it with SAP4all authorization, but still it was in Non editable mode.
Also i tried applying Note:1177952, but was not able to apply the same, as we are already using Enhancement pack-4.
let me know the solution to the above problem.
Best Regards
Vijay

Hi Vijay,
please follow the link given below and check whether the business function LOG_PP_SRN_CONF is activated or not?
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e9/dc4715919d4245a9416c668b66133c/content.htm
Regards,Kundan

How to authorization sales office and sales group in VA21 and VA01 t-code

I need to authorization sales office and sales group in va21,va22,va23 and va01, va02, va03 to control users access the sales order.
I found some articles how to resolve this problem.I have created new authorization object Z_VBAK_ VKO, and add these fields to the object: VKORG: Sales Organization, VTWEG:Distribution Channel, SPART: Division, VKBUR:Sales Office, VKGRP: Sales Group, AUART:Sales Document Type, ACTVT:Activity
I have add the object Z_VBAK_VKO to va01, va02, va03 in SU24 translation.
I test the authorization , but fail, va01 and va02 do not check the authorization.
Why? what can i do? please help me .
thanks

Dear Wu
I think you are using the concept of Master Roles and Derived Roles.If ur using then create a master role and derived role for the authorisation group you want. And in the derived role assign the specifics to the respective logins ID. If you want to attach the authorisation to the T-Codes Va01 or VA21 etc then you have to use Exit.
Correct me if i am wrong.
Regards
Jyotsana

How to download ECC customers without Sales Office and Sales Group values

Dear all,
In SD Customer master record we enter Sales Office and Sales Group fields under Sales Area tab-->Sales Tab.
While downloading customers form ECC to CRM, How can I exclude this Sales Office and Sales Group Data from the download.
I want to download customers without this sales office and Sales group data...Kindly suggest me how can I do this.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Hi Chandrakanth,
I have removed 'Object Permitted in determination' checkbox for all Sales Offices, but still the problem persist.
I am getting following problem in SMW01 while downloading customers.
"Sales office O 50000004 sales group O 50000057 not maintained for sales area O 50000001 C5 Z0
Message no. CRM_BUPA_FRG0140204."
This problem is coming for all customers, so I though of excluding Sales Office and Sales groups from downloading.
Can we use Filters functionality for this, if so what sort of settings need to be maintained for Customer_Main object in R3AC1 transaction.
Please suggest, your suggestions will be highly appreciated.
Best regards
Raghu ram

What happened to my tabs and tab groups when I synced to a new computer?

I have spent the morning trying to sync Firefox. On my previous computer, I was running FF31, but not as a clean install--as an upgrade from FF28. In the Sync screen, I saw my email address and recovery key, so I thought I was good to go.
Turns out that that wasn't the case, and I needed to set up a new Sync account.
Here are the steps I took to get my data back:
1) I uninstalled FF31, reverted to 28, used my email address and recovery key, and got my information back.
2) Then I updated to FF31.
3) In FF31, I unlinked my computer, created a new Sync account, and logged in to sync my data.
However, I was unable to access my tab groups. And when I upgraded to FF31, my tab groups still weren't back.
I tried looking in "Tabs from Other Devices", and there were no other devices listed.
How can I get my tabs and tab groups back? I had literally dozens of hours of work-related research saved in these tabs. I have so many visited sites in my history that there's no way I'd be able to recreate all of them.
Please help--I'm desperate. I can't lose all of those tabs.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Wism and RF Group Problem

Similar Messages

Maybe you are looking for