Wism2 and Wism1 in the same Chassis
Hi,
I w'll install one Wism2 into existing Catalyst 6509 running 12.2(17)SXF IOS version, and has Two other Wism modules (old generation)
Could advise witch IOS can support these three mixt Wism?
And can you tell me if I’ll configure the ports channel for the new WISM2?
Regards
Abdelaziz
Please see as below :
In Wism 1:
*apfMsConnTask_0:
Mar 04 14:10:58.038
: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2454 Could not process the RSN and WARP IEs.
station not using WPA or WPA2
on WLAN requiring WPA and/or WPA2.MobileStation:
7c:61:93:8b:4f:bb
SSID:XXXXXXXXX,AP: 00
Dot1x_NW_MsgTask_1: Mar 04 14:37:43.017: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3136 Max EAP identity request retries (3) exceeded for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:43.017: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:37.979: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:32.161: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3136 Max EAP identity request retries (3) exceeded for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:32.160: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:27.147: %DOT1X-3-AAA_AUTH_SEND_FAIL: 1x_aaa.c:597 Unable to send AAA message for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:27.123: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_5: Mar 04 14:35:47.956: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3136 Max EAP identity request retries (3) exceeded for client 58:1f:aa:95:6c:0d
*Dot1x_NW_MsgTask_5: Mar 04 14:35:47.956: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:95:6c:0d
*apfMsConnTask_0: Mar 04 14:10:58.038: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2454 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 7c:61:93:8b:4f:bb, SSID:APHM-UTILISATEURS,AP: 00
In Wism 2 when ON :
Dot1x_NW_MsgTask_1: Mar 04 14:37:43.017: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3136 Max EAP identity request retries (3) exceeded for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:43.017: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:37.979: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:32.161: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3136 Max EAP identity request retries (3) exceeded for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:32.160: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:27.147: %DOT1X-3-AAA_AUTH_SEND_FAIL: 1x_aaa.c:597 Unable to send AAA message for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_1: Mar 04 14:37:27.123: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:c9:ca:99
*Dot1x_NW_MsgTask_5: Mar 04 14:35:47.956: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:3136 Max EAP identity request retries (3) exceeded for client 58:1f:aa:95:6c:0d
*Dot1x_NW_MsgTask_5: Mar 04 14:35:47.956: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 AuthenticationAboted for client 58:1f:aa:95:6c:0d
Thanks
Similar Messages
-
FWSM and CSM (Load Balance) in the same chassi
Folks,
Is there any type of best practice (you ** must ** do like this) when you are going to implement the FWSM and the CSM modules on the same 6509 chassi ?
PS: The CSM is not doing FW loadbalance, it is doing loadbalance to servers located in a DMZ
PATH:
(outside) FWSM (inside) -> MSFC -> (inside) PIX (dmz) -> CSM , CSM -> (dmz) PIX (inside) -> MSFC -> (inside) FWSM
My main doubts:
1) FWSM using multi-context, Is there any integration problem with CSM ?
2) FWSM and CSS in routed mode, Is there any integration problem with both modules ?
3) Is it really necessary to operate the FWSM module in bus mode when using CSM in the same chassi (fabric switching-mode force bus) ?
Cisco Says:
"The CSM line card operates in bus mode. When using the CSM in conjunction with the FWSM line card,
Cisco recommends forcing the FWSM to operate in bus mode using the
fabric switching-mode force bus command. When service modules such as the CSM and the FWSM
operate in bus mode, traffic from DFC-enabled line cards still use the fabric connection."
In past it was a workaround due a bug, but I have found this recommendadon and know I am a little confused.
Tks !!!Luis-
You will want to used a routed mode on the CSM so that the Firewall contexts don't see eachothers MAC Addresses for any traffic not destine to to a VIP. On the CSM VLANs, you will want to create alias IPs to use as the next hop destination between contexts for non-VIP traffic. Other than that, the CSM has no concept of contexts, so as long as the traffic is symetric when it flows through the CSM VLANs, it will be happy.
Regards,
Chris -
How do I read and write on the same CAN Port
I have a PXI chassis with a NI PXI 8464 CAN card. I am learning to use this device. I am trying to send messages back and forth between the two ports on the card. I have four simple VIs:ReadWas; WriteWas;ReadSteering; and WriteSteering. I have been starting the read VIs first then starting the write VIs. When I start the write VIs I get an error from CAN init saying I am trying to change an object that is running.
Is it possible to send and receive on the same port of the CAN card without stopping then reinitializing the card?
I have attached ReadWas, ReadSteering and WriteSteering to this post. ReadWas and WriteSteering share a CAN port.
Any help is greatly appreciated,
Thanks,
Phillip
Attachments:
ReadWAS.vi 112 KB
ReadSteering.vi 143 KB
WriteSteering.vi 114 KBhave you looked at this example, (CAN Send & Receieve using NI-CAN Frames) it is in the example code section
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=E993D9B56C3D2BABE0340003BA230ECF&p_...
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=E993D9B56C3D2BABE0340003BA230ECF&p_...
Basically, you are getting the error because the second time you call CANconfig it realizes it is already open. Try consolidating the 2 pieces of code into 1 CAN VI. -
Using counter and output at the same time
Hi all,
I'm using a NI 9401 high speed digital IO module (with a cDAQ 9174 chassis) that has 8 digital IO channels, to perform two tasks at once in Labview. I can get both of them to work independantly, but when I put them together to run simultaniousy in parallel, it does not work. My two tasks are simple: 1. Generate a continious pulse train square wave output using one of the counters linked to one of the output channels (PFI7) and 2. Output a 'high' (5V) with one of the other channels (PFI1) when a certain logic condition is met.
When I run my code (attached), the pulse train output works, but the output on the other channel doesn't work when the logic condition is met. I should note that the logic condition is that when RMS current exceeds 3A, I want to output a 'true'. I am measuring current using another analog input card connected to the same chassis and this part is all working well. I think the problem is that there is some sort of interference between the pulse train output which is linked to PFI7 and the other output which is PFI1.
I know there is a limitation with the 9401 card that if the channels are in two groups, 0-3 and 4-7, and you must use a whole group as either all inputs or all outputs, but I don't think this should affect me, as I am using both my channels as outputs anyway, plus I am using channels 1 and 7 anyway.
If anybody has any ideas as to what could be wrong with my code, I would greatly appreciate it.
Attachments:
DSDBI Vegetation testing program.vi 115 KBOK, you've shot yourself in the foot.
It is a very bad idea to modify the shipping examples. Like testing bungee cords by juming off a cliff- sometimes you only get to try it once.
Now why on earth did you not add the DI code following the example's method of wiring the error chain and closing the task after the loop? You have duplicated code in both cases of your case structure the only difference.........(wait for it..........) There is a true constant in the true case where the false case contains a false constant. A wait for task complete is unnecessary for a 1 sample DI task- really the write just completes and the task stops all by itself. the only needed thing here is a DI Write 1 Ch 1 Sample no case structure, and wire the compare output to data to write.
You should probably add a control task vi with a "Reserve" input prior to each start task on the CO and AI Tasks and after the Create Task on the DO. Its a bit technical but the result is like taking vitamins- you'll just get better performance.
Jeff -
Currently have ipod touch 4 and am getting iphone 5c this weekend. Currently our family has several apple devices and they have the same apple ID for itunes and it is the same ID that we use for icloud. I want to set up a separate icloud ID so that it is only on my new device. I still want to keep the same apple ID for purchases. Can I do this and better yet when do I do this...before the purchase, after the purchase and backing up of data. Where do I go to create a new one?
Figured it out. Thanks.
-
My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
ThanksUsing More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax. -
I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one. -
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page. -
I had 2 iPhone 3G's, one of them screwed up and wouldn't recieve service. Up until then when I backed them up to my computer all was good, then one of them would update and all but a screen would pop up and tell me it couldn't back up to my computer. Recently I replaced the bad tele with an iPhone 4 and it does the same thing while the other iPhone 3G still backs up fine.......What up!!! Help please. Don't wanna lose my info..
I banged my head on the wall with the same problem for two days. Tried everything mentioned, and this worked, finally. The problem is that the backup files are not where you think they are.
You need to delete the MobilSync backup folder. I have a Mac. Went to /Library/Application Support/MobileSync/Backup and deleted the Backup folder.
Fixed the problem. Give it a try and good luck! -
How do i start video and audio at the same time in ios
How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.
-
Recording Audio and Midi at the same time in Logic 7 Express Can it be done
I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor
I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL -
Can we use both INSERT and UPDATE at the same time in JDBC Receiver
Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,Hi ,
If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server. If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam -
I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.
What do you see under Edit > Preferences > Devices?
tt2 -
Designer 6i and 10g on the same machine?
I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIASee my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.
Maybe you are looking for
-
Resources not getting displayed in Resource Planning iView
Hi, We are working in CRM 5.0. We have assigned the iview for Resource Planning for a Portal Role. The iView is also opening correctly. The Problem is that when we give a Particular Service Org Unit (Technicians Group) in Advanced Search, none of the
-
This is the last error summary I received: Process: com.apple.WebKit.WebContent [965] Path: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com. apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit
-
Why do my apps open when I try to update them?
I've tried turning in on and off, signing in and out, and closing the apps before updating. Yes I use iOS 8
-
User interface effects even though it's deselected?
So I have "user interface sound effects" deselected in System Preferences, but whenever I'm using iTunes or other apps I still get SOME of them? Particularly if I go to delete something or get some type if "denial" interface effect, one that users th
-
SAP business workflow interagrated with ep
Hi Exports, I have develop a workflow in SAP R/3, and i want to interagrate with EP. The same notification goes to EP UWL. Please any body can help me how to interface with EP UWL and what are the process needed. Advance thanks. Regards, Jnana