WiSM2 with 7.4.110.0 & dhcp stats
Hi,
WiSM2 HA with 7.4.110.0 and DHCP proxy enabled. If we run "show dhcp stats" command, only the initially defined dynamic interfaces are showed. All dynamic interfaces are defined in the same way (only VLAN and related IP parameters are different, all interfaces has a external primary DHCP server asigned and proxy mode is global).
Any idea?
Thanks in advance.
the gateway ip: 254.0.168.192 was an example.
the gateway ip I get with this configure is: 33.36.168.192
(Cisco Controller) show>interface detailed vlan107
Interface Name................................... vlan107
MAC Address...................................... c8:9c:1d:6a:81:80
IP Address....................................... 192.168.36.10
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 192.168.36.33
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 107
Quarantine-vlan.................................. 0
NAS-Identifier................................... SR-WLC-1
Physical Port.................................... 1
DHCP Proxy Mode.................................. Global
Primary DHCP Server.............................. 192.168.250.12
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
mDNS Profile Name................................ Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
L2 Multicast..................................... Enabled
Similar Messages
-
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Skype 6.3.59.582 crashes with Canopus ADVC-110 con...
Skype 6.3.59.582 crashes with Canopus ADVC-110 connected.
OS version: 10.7.5
Model Name: MacBook Pro
Model Number: A1260
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo (Penryn)
Processor Speed: 2.6 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 6 GB DDR2 SDRAM 667MHz (1x 2GB ; 1x 4GB)
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f2Please avoid cross-posting. I replied in the Mac forum.
-
Help with streaming result sets and prepared statements
hi all
I create a callable statement that is capable of streaming.
statement = myConn2.prepareCall("{call graphProc(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}",java.sql.ResultSet.TYPE_FORWARD_ONLY,
java.sql.ResultSet.CONCUR_READ_ONLY);
statementOne.setFetchSize(Integer.MIN_VALUE);
the class that contains the query is instantiated 6 times the first class streams the results beautifully and then when the second
rs = DatabaseConnect.statementOne.executeQuery();
is executed I get the following error
java.sql.SQLException: Can not use streaming results with multiple result statements
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.MysqlIO.readAllResults(MysqlIO.java:1370)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1688)
at com.mysql.jdbc.Connection.execSQL(Connection.java:3031)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:943)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1049)
at com.mysql.jdbc.CallableStatement.executeQuery(CallableStatement.java:589)
the 6 instances are not threaded and the result set is closed before the next query executes is there a solution to this problem it would be greatly appreciated
thanks a lot
BrianDatabase resources should have the narrowed scope
possible. I don't think it's a good idea to use a
ResultSet in a UI to generate a graph. Load the data
into an object or data structure inside the method
that's doing the query and close the ResultSet in a
finally block. Use the data structure to generate
the graph.
It's an example of MVC and layering.
Ok that is my bad for not elaborating on the finer points sorry, the results are not directly streamed into the graphs from the result set. and are processed in another object and then plotted from there.
with regards to your statement in the beginning I would like to ask if you think it at least a viable option to create six connections. with that said would you be able to give estimated users using the six connections under full usage.
just a few thoughts that I want to
bounce off you if you don't mind. Closing the
statement would defeat the object of of having a
callable statement How so? I don't agree with that.
%again I apologise I assumed that since callable statements inherit from prepared statements that they would have the pre compiled sql statement functionality of prepared statements,well If you consider in the example I'm about to give maybe you will see my point at least with regards to this.
The statement that I create uses a connection and is created statically at the start of the program, every time I make a call the same statement and thus connection is used, creating a new connection each time takes up time and resources. and as you know every second counts
thanks for your thoughts
Brian. -
MSI NX6600 TD256E with 8981 ver:110 PCB
Hello all!
reviewed the search, but did not find anything intelligent by my question ...
help please find a scanned image of the (MSI NX6600 TD256E with 8981 ver: 110 PCB) cards.
those images that I find myself - or to resolve minor or from ver: 100 PCB:
Quote
http://www.nix.ru/include/view-photo.html?good_id=36018&pid=2258
http://www.nix.ru/include/view-photo.html?good_id=41092&pid=2258
http://www.nix.ru/include/view-photo.html?good_id=43410&pid=2258
http://www.nix.ru/include/view-photo.html?good_id=34915&pid=2258
i need photos\scans of both sides of card
Thanks for help, best regards!find more, but not hi res...
http://i9.photobucket.com/albums/a100/iMAXXX/6600%20SLI/6600.jpg -
MAIL 1.3.11: server error with the port 110
I have 10.3.9 with MAIL 1.3.11 and I can't conect to the server with the port 110... why does it happens? how i fix that? thanx
I don't understand your obsession with overstuffed mailboxes.
What are you talking about? As I told you in a previous post, Mail sometimes chokes on a message it cannot download and that prevents it from downloading the rest as well. This is a relatively common problem. It has absolutely nothing to do with overstuffed mailboxes.
The two servers are failing to connect.
This is wrong! And which two servers are you talking about? According to the activity information you reported, Mail is connecting to the POP server, but failing to download the messages it sees there for some reason...
If you want to mess with the contents of your ~/Library/Mail/ folder (which you said in your first post you didn’t want to do), there are a couple of things you may try as well.
For POP accounts, Mail uses a file within the account folder to keep track of which messages have already been downloaded. Deleting that file causes Mail to treat everything still on the server as if new and try to download it again:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate one or two files named MessageUidsAlreadyDownloaded and move them to the Trash. Mail 1.x used MessageUidsAlreadyDownloaded to keep track of which messages had already been downloaded. Mail 2.x uses MessageUidsAlreadyDownloaded2 for the same purpose.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder. -
Will the Google Docs app in the iTunes store work with my new iMac? Description states it works with the iPod, iPhone and iPad.
There's iOS apps for iOS which is what iPods, iPads, and iPhones use. Then there are Mac Apps (which is a different store) which is what run on a computer with OSX.
-
I jus bought a brand new macbook pro 13" entry level
If I Replace my SuperDrive with a Hard Drive or Solid State Drive. Will it void my warranty?
Or is it possible to change it as I`ve said and put the extra hdd in the optical drive if its done somewere like bestbuy?LowLuster, greetings:
LowLuster wrote:
It will void your warranty if Apple finds out that you have made this modification. But if you ever have a need to use the Apple warranty you should put the optical drive back in before taking it to an Apple store for the warranty work.
This is contrary to the terms of use:
8. Keep within the Law
1. No material may be submitted that is intended to promote or commit an illegal act.
Ciao. -
I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state.
e.g. I've got a WI with a field on it that tells me how many active bugs are linked to it. (I'm not actually counting active bugs, but hopefully you get the idea).
The only way I can think to do this is with a TFS plugin and catching the workitemchanged event. I'd prefer to do this entirely in the WI if possible? is there a way to do this? ThanksHi TimB33,
Thanks for your post.
As far as I know there’s no default WI rule support to get the specific WIT linked count, I think you need to create your custom work item control to achieve that if you want this field.
For this scenario, please submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them
seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Time Machine does not work with Seagate NAS 110
I have been trying to configure time machine to automatically back-up a Macbook Pro to my Seagate NAS 110 to no avail. I have the latest version of OSX Lion running on my Macbook as well as the latest firmware update on my NAS device which was designed to erradicate the very problem I am experiencing now. It would be greatly appreciated if anyone was able to point me in the right direction. Thanks in advance!
NJayasinghe wrote:
Here is the link where it specifically states 'Fix for Mac OS Lion Time Machine compatibility'.
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=ba-nas-110&vgnextoid=174 af1ec4d173210VgnVCM1000001a48090aRCRD
I hadn't found that. Unfortunately, there's no date on it, and no mention of Lion. One would assume that's what it means, but some makers have simply abandonded some of their old products.
I was hoping that somebody on this forum has been experiencing the same issues as I have and found a solution to the problem.
It doesn't look like many are using it on Macs. Yours is the only post found in the Apple forums containing Seagate Blackarmour NAS 110.
Searching for Seagate NAS 110 does get some hits, but none with resolutions:
https://discussions.apple.com/search.jspa?start=0&q=Seagate%20NAS%20110&peopleEn abled=true&dateRange=all&rankBy=relevance
Sorry not to have any better news. -
Issue with PPR and/or item session state
using version 3.2
On my Page2, I have two regions: HTML and a report.
In the HTML region, I have two datepickers: FROMDATE and TODATE
Their defaults are set to the min and max of a DATECREATED field in my table.
In the report region is a classic report generated by sql getting all rows with a DATECREATED between the values of the two datepickers.
In the header of the report region, I'm using the following to do a partial page refresh of the report region:
*<script type="text/javascript">*
*function p2Refresh(){*
*$a_report('#REGION_ID#'.substring(1),'1','15');*
alert($x('P2_FROM_DATE').value);
*</script>*
*<input type="Button" value="Refresh List" onClick="p2Refresh();">*
I'm just using the alert pop-up to verify the info in the datepicker.
The problem is that if I change the dates and hit the 'refresh' button, the report is NOT using the current value of the datepickers.
I've also tried the following which is fired from an 'onChange' event of the datepickers
*<script type="text/JavaScript">*
*function setDate(pItem, pValue){*
var get = new htmldb_Get (null, $x('pFlowId'), null, 0);
get.add(pItem, pValue);
get.get();
get = null;
*</script>*
Any clues would be great.
Thanks.
Edited by: 903802 on Dec 21, 2011 8:27 AMSolved it.
I made two changes. First, the 'onChange' for the datepickers, updated the state for both datepickers at the same time:
*<script type="text/JavaScript">*
*function setDates(){*
var get = new htmldb_Get (null, $v('pFlowId'), null, 0);
get.add('P2_FROM_DATE', html_GetElement('P2_FROM_DATE').value);
get.add('P2_TO_DATE', html_GetElement('P2_TO_DATE').value);
get.get();
get = null;
*</script>*
However, the fix was actually because in the *"var get = "* statement, I had used *$x* instead of *$v*.
Works like a champ now. -
Problem with checkbox and "if" & "else if" statement
Hi, i have got something like this:
if (this.rawValue=="0" ){
app.alert("0");
this.resolveNode("Circle1").presence = "hidden";
this.resolveNode("cross").presence = "visible";
else if (this.rawValue=="1"){
app.alert("1");
this.resolveNode("Circle1").presence = "visible";
this.resolveNode("cross").presence = "hidden";
else{
app.alert("2");
this.resolveNode("Circle1").presence = "hidden";
this.resolveNode("cross").presence = "hidden";
I set default position on neutral state. Values are default: on=1, off=0, neutral=2.
When i am clicking on my check box button there works only "on" (1) and "neutral" (2) state. "off" state is not working and i don`t know why.
Please help me with that.Hi,
Here is the form back to you: https://acrobat.com/#d=qiBnkcpRnPWxA5hokFXvQw.
I have tightened the script, but that was not the main problem. The issue was that the checkbox was on the Master Page and had a default value of neutral. Some objects on the Master Page, like checkboxes with default values and buttons, can misbehave when the form is relaid out (layout:ready event).
If you have a look at the form you will see that the objects on the Design Page behave as expected. However similar objects on the Master Page will revert to default everytime the layout:ready event fires. This has already been logged with Adobe.
I would recommend moving the objects to a Design Page or maybe use a dropdown instead of the checkbox.
Niall -
Problem with configuration of wifi newtork- dhcp
hi.
i've got a small problem with configuration of wi-fi network.
i use dhcp network.
there are some errors about network during boot up (but its to fast for my to write it down)
after log-in i have to setup network access by typing
iwconfig eth2 essid SpeedTouchBCE72F
and then i heve to run this command
dhclient
and after that i've got an access to internet
this is my rc.file
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pl_PL.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/London"
KEYMAP="-u pl2"
CONSOLEFONT="lat2-16.psfu.gz"
USECOLOR="yes"
LC_ALL="pl_PL.UTF-8"
LESSCHARSET="UTF-8"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="linugrat"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth2="dhcp"
INTERFACES=(lo eth2)
ROUTES=(!gateway)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng ipw3945d network netfs crond)
# End of file
szymonHi Mariano
I think you need to <b>restart your portal Engine</b> after making correct settings.
Also please refer to the link below to get a better insight:-
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/719a425ffac46ae10000000a155106/frameset.htm
Regards
Navneet -
Windows Server 2013; Exchange Server 2013 with Cumulative Update 1
Cannot install Cumulative Update 3 for Exchange Server 2013. It fails with
[xxx] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid. See the Exchange setup log for more information on this error.
[xxx] [0] [ERROR] Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid.
[xxx] [0] [ERROR] The supplied credential is invalid.
(Crosses - XXX - replace original values.)
I have found that a few others have experienced the same problem but found no solution, nor could come up with anything myself. If it is any hint, Event 40961 was logged in the Event Viewer around the same time on almost all installation attempts to be purely
conincidental:
The Security System could not establish a secured connection with the server
ldap/xxx.xxx/[email protected] No authentication protocol was available.
Both Windows Server and Exchange Server otherwise work OK, and do not recall any issues with Cumlative Update 1 installation.Hi vhr1,
Based on my knowledge, the Event ID 40961 is a warning message.
This behavior occurs when we restart the server that was promoted to a DC. The Windows Time service tries to authenticate before Directory Services has started.
Found some resources for your reference even if the Exchange Version is mismatched:
http://blogs.technet.com/b/jhoward/archive/2005/04/20/403946.aspx
http://support.microsoft.com/kb/823712/en-us
About the error message, "Setup encountered a problem while validating the state of Active Directory: Active Directory operation failed on . The supplied credential for 'XXX\Xxx' is invalid."
The error message InvalidCredentials means: the wrong password was supplied or the SASL credentials cannot be processed.
Found a similar thread for your reference, hope it is helpful:
http://social.technet.microsoft.com/Forums/en-US/98e26ad6-8e43-4ef5-8ff9-e9fee6e76bda/bind-operation-is-invalid?forum=exchangesvrdeploylegacy
Feel free to contact me if there is any problem.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
HTTP Receiver interface returns with error code 110
Hi All,
We are posting the document from XI to a external server as HTTPS request.
We are able to sucessfully post the request to external server using HTTP destination as address type but not able to post sucessfully with URL as address type.
Here goes the details -
We are able to post the HTTPS request successfully on the external server using the HTTP destination as address type in HTTP receiver adapter setup.
When we setup address type as HTTP destination , we need to provide the following details -
IN SM59 , Connection type G
Target Host : host name ( with out "https://" as prefix)
Service No : 443
Path prefix : query string
SSL : Active
Certificate : Select the certifacte from the client certificate list.
We can post the request to external server using URL as address type in HTTP receiver adapter setup.
When we setup address type as URL , we need to provide the following details -
Address type : URL Address
Target Host : host name ( with out "https://" as prefix)
Service Number : 443 ( HTTPS port setup on XI)
Path : query string.
When we post the same request as we did with HTTP destination as Address type , we are getting a HTTP response code as failure HTTP response code 110
Please find the details about the return code -
If a cache returns a stale response, either because of a max-stale directive on a request, or because the cache is configured to override the expiration time of a response, the cache MUST attach a Warning header to the stale response, using Warning 110 (Response is stale).
110 Response is stale
MUST be included whenever the returned response is stale.
Please find the error message from SXMB_MONI
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please let me know if some one has faced this issue.
Regards,
Reddy
Edited by: Nanda kishore Reddy Narapu Reddy on Mar 11, 2008 12:35 PMHi All,
Is some one can confirm that - We can use HTTPS with Address type as URL address in HTTP receiver adapter setup.
I can confirm that using HTTP destination as Address type in HTTP receiver adapter setup we can attain HTTPS communication with external server.
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can guide me what are the steps need to be done.
Address type is a parameter in HTTP adapter setup .
Regards,
Reddy
Maybe you are looking for
-
I currently have an iphone 5 that was verizon locked but has been unlocked by them because of my contract, the phone is still under the apple warranty but the power button is not working, if it was the case that apple has to replace it with another p
-
How to invoke A CORBA-Java Client Application, from Oracle???
Hi, I have a CORBA-Java Client Application, which takes the input parameters from a Oracle table and calls the CORBA Server, passes these parameters to the C++ Server Application and gets the results back thorugh CORBA. My problem is, this java appli
-
HT1178 Just installed Airport TC and having connectivity issues. Please advise.
I just installed Airport TC. Get flashing "double nat" on TC's Status. Changed to bride mode and computer loses connectivity to the internet saying ip address is already in use. Ipv4 set to DHCP only. Please advise.
-
I had rented some movies on Itunes put them onto my Ipod classic, after I had watched them although they had expired they did not delete form the rentals list and almost one year later they are still there. The movies can not be watched and I have tr
-
Is is possible to link to data mgr & client in same app?
I have a Linux application that needs to access 2 datastores, one local and one on another machine. Is is possible to link the application to both TT Data Manager(libtten.so) for the local and the client driver (libttclient) for the remote?. If not,