WiSM2 WLC 7.2 Maximum Allowed Clients under Global Parameters 802.11a/n b/g/n

Hello everyone,
Just loaded the 7.2.103.0 software onto the brand new WiSM2. Going throught the options and have found that under the global parameters for 802.11a/n, 802.11b/g/n radios is now the "Maximum Allowed Clients" option. The allowed setting is from 1 - 200 clients.
Does that mean only 200 clients will be allowed to associate to the WLC on that radio at a maximum?
Doesn't seems to make sense... I have the 500 AP license on this WiSM2... I know this option used to be an optional setting under a WLAN in previous releases.
Any ideas?
Regards,
Sasha.

Does that mean only 200 clients will be allowed to associate to the WLC on that radio at a maximum?
As what Scott has responded, this means 200 clients per WAP.
If you do exceed 200 clients per WAP (or whatever value you put in there) the clients will just get a nag and the system will let you in eventually.

Similar Messages

WLC 4400 : some of the clients are stuck in 802.1x REQD ( Auth - no but status is Associated ) in PEM process

Hi ,
I have wlc 4400 with 1010 AP's wireless set-up.
Everything is working fine but unfortunately , I am coming across with one issue that, clients are not getting authenticated.
If I see the status of respective client in WLC :
status : Associated
Auth : No
Policy manager : 802.1X REQD
I read about PEM ( Policy enforcement Module ) , as it is going through same procedure but policy manager should in " RUN " condition , Unfortunately it is not.
how do i resolve this issue ?

Hi Vinod,
The 802.1X_REQD state would suggest that the client cannot complete L2 authentication.
If possible, it would be helpful to collect the following debugs from the WLC while trying to connect the client:
debug client
debug aaa event enable
Also, please attach the full text output of the command "show run-config" and let us know the WLAN through which the client should be connecting.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Your message exceeds the maximum allowed by the server

After many years my Mail refuses to work properly:
This message could not be delivered and will remain in your Outbox until it can be delivered.
Your message has size 1,6 MB, which exceeds 1,0 MB, the maximum allowed by the server.
I created another account but problem remains.
I talked with my internet provider and the problem is only with Mail.
Thanks.

Is this for a .Mac account?
If so, check this link which the following was copied from.
http://docs.info.apple.com/article.html?artnum=25301
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.
There is nothing wrong with Mail and you would experience the same with any email client such as Mail on a Mac or a Windows PC.
Most ISPs and email account providers have the identical 10 MB overall message size limit for received and sent messages. In fact, I know several people who have a smaller overall message size limit such as 5 MB so this is not unusual.
Even if your ISP or email account provider for your email account has a larger overall message size limit, the overall message size limit must be under the recipient's overall message size limit imposed by their ISP or email account provider for their email account or your sent message will be rejected by the recipient's incoming mail server.
All message attachments must be encoded before being sent and decoded when received. Mail uses MIME 1.0 for attachment encoding/decoding which is the internet standard but a problem with MIME is it isn't very efficient.
The attachment encoding process increase the size of the pre-encoded file by roughly 50% or so. A 5 MB file (pre-encoded) will be roughly 7.5 MB in size after the attachment encoding process.

Maximum allowed run time for a task sequence

I found if i left the maximum allowed run time for a task sequence with a defualt value of "0" in configuration manager 2012 r2 cu2,the required task sequence would never run without a maintenance window larger than
12H.
At client side,the servicewindowmanager.log always said this required task sequence had a maximum runtime of 43200 seconds(12h).
servicewindowmanager.log:
OnIsServiceWindowAvailable called with: Runtime:43200, Type:5
Program cannot Run! Setting *canProgramRun to FALSE
There does not exist a Service Window of this Type, for this duration. The Program will not run.
If i set maximum allowed run time to 120 minutes,task sequence would run under a 3h mainenance window.
So if you leave the maximum allowed run time for a task sequence with a value of "0" then client agent will evaluate it as 43200(12h) for a required deployment,is it true? have i missed something?

Hi,
That is correct it will default to the same value as a program with a "Unknown" maximum runtime value, Unknown is also evaluated to 0 = 12h so that is correct behaviour.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Upgrade error "exceeded maximum allowed length (134217728 bytes)

Hi:
I'm trying to add a patch to the OEM patch cache, and I'm getting an error:
Error: - Failed to Upload File.Uploaded file of length 545451768 bytes exceeded maximum allowed length (134217728 bytes)
The patch file is what it is (545451768 bytes). How do I install this patch? I'm trying to upgrade a 10.1.0.3 DB to 10.1.0.4
Thanks

This log is for external user.
Did you deploy Lync edge server?
The Edge Server rejects the authentication request, and redirects the Lync 2010 client to the Lync Web Services (https://lyncexternal.contoso.com/CertProv/CertProvisioningService.svc).
It seems the redirect fails, please check the event view on Lync edge Server.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

600 is the maximum allowable size of an index.

"600 is the maximum allowable size of an index. Composite index specified is 1275 bytes."
The above is the error I receive when I deploy my application in JBoss version 4.0.1. I am using Sybase 11.5. I am using jtds-1.1 database driver.
BankService is an entity bean.
I am unable to figure out where the problem is.
I am in the middle of a deployment at a client's and am desperately in need of help.
Thanks in advance.
Regards,
Shardul.
Complete trace of the exception
org.jboss.deployment.DeploymentException: Error while creating table bankservice; - nested throwable: (java.sql.SQLException: 600 is the maximum allowable size of an index. Composite index specified is 1275 bytes.
     at org.jboss.ejb.plugins.cmp.jdbc.JDBCStartCommand.createTable(JDBCStartCommand.java:540)
     at org.jboss.ejb.plugins.cmp.jdbc.JDBCStartCommand.execute(JDBCStartCommand.java:196)
     at org.jboss.ejb.plugins.cmp.jdbc.JDBCStoreManager.startStoreManager(JDBCStoreManager.java:484)
     at org.jboss.ejb.plugins.cmp.jdbc.JDBCStoreManager.start(JDBCStoreManager.java:381)
     at org.jboss.ejb.plugins.CMPPersistenceManager.start(CMPPersistenceManager.java:157)
     at org.jboss.ejb.EntityContainer.startService(EntityContainer.java:340)
     at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:272)
     at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:222)
     at sun.reflect.GeneratedMethodAccessor48.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
     at $Proxy0.start(Unknown Source)
     at org.jboss.system.ServiceController.start(ServiceController.java:416)
     at sun.reflect.GeneratedMethodAccessor9.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
     at $Proxy129.start(Unknown Source)
     at org.jboss.ejb.EjbModule.startService(EjbModule.java:394)
     at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:272)
     at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:222)
     at sun.reflect.GeneratedMethodAccessor48.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
     at $Proxy0.start(Unknown Source)
     at org.jboss.system.ServiceController.start(ServiceController.java:416)
     at sun.reflect.GeneratedMethodAccessor9.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
     at $Proxy20.start(Unknown Source)
     at org.jboss.ejb.EJBDeployer.start(EJBDeployer.java:605)
     at org.jboss.deployment.MainDeployer.start(MainDeployer.java:964)
     at org.jboss.deployment.MainDeployer.start(MainDeployer.java:956)
     at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:775)
     at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
     at sun.reflect.GeneratedMethodAccessor50.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:122)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
     at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
     at $Proxy8.deploy(Unknown Source)
     at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:305)
     at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:481)
     at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:204)
     at org.jboss.deployment.scanner.AbstractDeploymentScanner.startService(AbstractDeploymentScanner.java:277)
     at org.jboss.system.ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:272)
     at org.jboss.system.ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:222)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.system.ServiceController$ServiceProxy.invoke(ServiceController.java:891)
     at $Proxy0.start(Unknown Source)
     at org.jboss.system.ServiceController.start(ServiceController.java:416)
     at sun.reflect.GeneratedMethodAccessor9.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:72)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
     at $Proxy4.start(Unknown Source)
     at org.jboss.deployment.SARDeployer.start(SARDeployer.java:261)
     at org.jboss.deployment.MainDeployer.start(MainDeployer.java:964)
     at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:775)
     at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
     at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:722)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:144)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
     at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:122)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
     at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:131)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:642)
     at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
     at $Proxy5.deploy(Unknown Source)
     at org.jboss.system.server.ServerImpl.doStart(ServerImpl.java:413)
     at org.jboss.system.server.ServerImpl.start(ServerImpl.java:310)
     at org.jboss.Main.boot(Main.java:162)
     at org.jboss.Main$1.run(Main.java:423)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.sql.SQLException: 600 is the maximum allowable size of an index. Composite index specified is 1275 bytes.
     at net.sourceforge.jtds.jdbc.SQLDiagnostic.addDiagnostic(SQLDiagnostic.java:364)
     at net.sourceforge.jtds.jdbc.TdsCore.tdsErrorToken(TdsCore.java:2754)
     at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2195)
     at net.sourceforge.jtds.jdbc.TdsCore.getMoreResults(TdsCore.java:620)
     at net.sourceforge.jtds.jdbc.JtdsStatement.processResults(JtdsStatement.java:483)
     at net.sourceforge.jtds.jdbc.JtdsStatement.executeSQL(JtdsStatement.java:445)
     at net.sourceforge.jtds.jdbc.JtdsStatement.executeImpl(JtdsStatement.java:623)
     at net.sourceforge.jtds.jdbc.JtdsStatement.executeUpdate(JtdsStatement.java:1042)
     at net.sourceforge.jtds.jdbc.JtdsStatement.executeUpdate(JtdsStatement.java:999)
     at org.jboss.resource.adapter.jdbc.WrappedStatement.executeUpdate(WrappedStatement.java:229)
     at org.jboss.ejb.plugins.cmp.jdbc.JDBCStartCommand.createTable(JDBCStartCommand.java:527)
     ... 122 more

Hi Martin Jelínek,
I think there is problem while creating Clusters Index. In Sybase there are some limitation for creating Clustered Index make sure that the lengths total no more than 600 bytes.
Please refer to the below link it might be helpful to you.
SyBooks Online-Error 1903.
SAP Sybase Forums - ASE - General Discussion - Enen in ASE 15; why maximum size of index is limited to 600 bytes (at le…
Regards,
Akhileshkiran.

Project exceeds the maximum allowed content

Please let me know how I can correct this error message that I get when I decide to burn my DVD. (Project Duration Your project exceeds the maximum allowed content duration. You will not be able to burn your DVD).
Thank you;

Hello, Thomas,
Welcome to the discussions!
You will get the 'exceeds the maximum allowed content duration' message if your DVD project exceeds the time limit for the type of burn you have selected.
1. If your project, usually iMovie, is over 2hrs, you cannot burn it to a single layer DVD.
2. If your project is under 2hrs but your menus and submenus' audio and video content is extensive, your project will exceed the DVD capacity.
3. Most commonly, your project is over 2 hrs, but you have selected "best performance" in DVD preferences instead of "best quality." 'Best performance' is for projects that are under 60min, and 'best quality' is for those over 2 hrs. You change this in DVD preferences.
Explanation for the differences (adapted from David Pogue's little iDVD4 pamphlet):
"Choosing best performance for shorter projects allows the DVD app to allot a fixed amount of data to each frame of video, enough to make it look great no matter how many minutes of video it includes(up to 60min) so that a lot of the DVD can end up empty, but the burning process goes quickly and the video looks great.
Choosing best quality allows the DVD app to us all the space on the balnk DVD by analyzing the amount of video included and dividing it into the amount of space available on the DVD so that the amount of information used for each frame will vary from project to project, and it will take longer to burn because of the analysis time. But, it will give 2 hrs of great-looking video per disc."
Does this help??
Post back if you are still having problems, and if so, be specific in what you are trying to do and what is not working.

Bex Query: Too many table names in the query The maximum allowable is 256

Hi Experts,
I need your help, Im working on a Query using a multiprovider of 2 datastores, I need to work with cells to assign specific acconts values to specific rows and columns, so I was creating a Structure with elements from a Hierarchy, but I get this error when I'm half way of the structure:
"Too many table names in the query. The maximum allowable is 256.Incorrect syntax near ')'.Incorrect syntax near 'O1'."
Any idea what is happening? is ti possible to fix it? do I need to ask for a modification of my Infoproviders? Some one told me is possible to combine 2 querys, is it true?
Thanks a lot for your time and pacience.

Hi,
The maximum allowable limit is 256 holds true. It is the max no. of characteristics and key figures that can be used in the column side. While creating a structure, you create key figures (restricted or calculated) and formulas etc.. The objects that you use to create these should not be more than 256.
http://help.sap.com/saphelp_nw70/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/frameset.htm
Not sure if combination of 2 query's is possible. You can use RRI. Or have a woorkbook with 2 queries.
Hope it helps.

I need more than the maximum allowed 30 profiles - how do I change this?

I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

I have a 13 inch macbook (late 2007) what is the maximum allowable height for a hard drive?

what is the maximum allowable height for an internal hard drive. I want to replace my hard drive are there any other things I should make sure of in terms of compatability?

timfromdoylestown wrote:
would they erase it and reformat it? what is the purpose of doing so?
they have to format it to make it mac "compatible", for a lack of better terms. I don't know what they would do.

Column name length exceeds maximum allowed

Hello,
I get this error when am trying to create a table. ERROR: Column name length exceeds maximum allowed length(30).
Is it able to extend this length to be more than 30 ? By the way I am using Oracle 11g
Regards,
Moussa El Tayeb
about.me/MoussaEltayeb

Hello,
also Oracle has some limits. For more Information see the logical limits
http://docs.oracle.com/cd/E14072_01/server.112/e10820/limits.htm
regards
Peter

Index Name Exceeds Maximum Allowed

I'm using the IKM Oracle Incremental Update and it creates a unique index on my interface table. The problem is that the interface table is i$_<Table Name>. The index is then created as i$_<Table Name>_idx. The table I am working with is already 25 characters and the maximum allowed on Oracle (10g) is 30. Is there a setting that I need to change or do I have to customize the knowledge module?
Thank you,
Troy

So you can try to remove a few char without changing a lot of thing.
For exemple you can modifiy the Unique Index procedure of your IKM Oracle Incremental Update.
I think you have this in the Index procedure:
create unique index <%=snpRef.getTable("L","INT_NAME","W")%>_idx on <%=snpRef.getTable("L","INT_NAME","W")%> (<%=snpRef.getColList("", "[COL_NAME]", ",", "", "(UK)")%>)
<%=snpRef.getUserExit("FLOW_TABLE_OPTIONS")%>
Which return you the the name of your index like i$_<Table Name>_idx
if you change what is in bold in the script you can remove 5 char and maybe it woulb be good for you.
By replacing INT_NAME by TARG_NAME you can obtain an index nammed <Table Name>_idx which remove 3 char
and after that you can change the "_idx" by "IX" which will give you <Table Name>IX and which remove 2 more char
so the procedure will look like :
create unique index <%=snpRef.getTable("L","TARG_NAME","W")%>ID on <%=snpRef.getTable("L","INT_NAME","W")%> (<%=snpRef.getColList("", "[COL_NAME]", ",", "", "(UK)")%>)
<%=snpRef.getUserExit("FLOW_TABLE_OPTIONS")%>
--> Evidently you can change a lot of other things to obtain less char for the name of your index

How to determine the maximum allowable length of a filename for Window ?

Hi all,
Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
However, while i try to extract some files from the zip file i just created, i encountered the error
java.util.zip.ZipException The filename is too long.
I am using the class ZipFile to extract the files from the zip file like the following
String absPath = "A very long filepath which exceed 260";
ZipFile zipF = new ZipFile(absPath); //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
Thanks

Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

Looking for an online LR3 gallery that allows clients to give feedback.

Tried FSS Select from LightroomGalleries but no luck (I only get an endless "loading gallery"). I just want something simple that would allow clients to provide feedback (comments/picks/ratings) on a series of photos I just took for them.
Any suggestions?
Thanks very much!

Wonderful - thanks a lot for the suggestions.
Paul
Date: Thu, 17 Mar 2011 03:11:57 -0600
From: [email protected]
To: [email protected]
Subject: Looking for an online LR3 gallery that allows clients to give feedback.
http://theturninggate.net/galleries/html-galleries/ttg-client-response-gallery/
>

WAP561 - After 2-3 days the AP will not allow clients to fully authenticate (628911547)

Have a total of 5 APs and every 2-3 days these devices seem to not allow clients to connect. Clients appear to associate but never authenticate. I have opened a case with Cisco (Case number in title) but want to see if anyone else is having this issue and how you may have resolved this.
I received an email from an engineer and one of the options he asked me to change was not even an option on the screen. I have UNTAGGED VLAN selected however MANAGEMENT VLAN is not an option. Below is his email.
Making a bit of reasearch i discovered that maybe you have fallen into a firmware bug.
It should be related to VLAN.
If you go on VLAn and IPv4 setting you should see somewhere the MANAGEMENT VLAN and UNTAGGED VLAN settings.
Both of them should be ENABLED.
On the next fw release this should be fixed because it’s normal to have both disabled, but just to workaround the problem you could try with this settings enabled and see if the “freeze” is not happening again.
Please update me so i can close this case or go on with the process.

The Fix Multicast rate setting can be found on the Wireless - Radio Page. In the advanced settings section. Below the
Transmit Power settings.
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
Wireless Subject Matter Expert
CCNA, CCNA-Wireless
866-606-1866
Mon - Fri 09:30 - 18:30 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found.

WiSM2 WLC 7.2 Maximum Allowed Clients under Global Parameters 802.11a/n b/g/n

Similar Messages

Maybe you are looking for