Witch SAPGUI can be used in UNIX OS.

HELLO,
Witch SAPGUI can be used in UNIX OS SUN AIX.
following SAPGUI was be found in SAP GUI family.
SAP GUI for Windows: 6.20, 7.10
SAP GUI for Java: 7.10
SAP GUI for HTML/ITS: ITS Standalone (6.20), ITS Integrated (NW04/6.40), ITS Integrated (NW04s/7.0)
SAP Console: 7.10
Is SAP GUI for Jave:7.10?
Best Regards.
Pangyanting.
Edited by: yanting pang on Oct 29, 2008 11:57 AM

SAP GUI for Java: 7.10
SAP GUI Family -->
SAP GUI for Java Download and Installation Information
Regards.

Similar Messages

Witch software can i use to do split screen on video editing on a macbook

witch software can i use to do split screen on video editing on a macbook pro
please apple people without using the very expensive final cut

iMovie 11 has split screen. Enable the Advanced Tools in iMovie Preferences. Then drag one clip on top of the other and choose split screen.
Final Cut Express and Final Cut Pro will allow you to do this with a lot more control.

How can I use the UNIX ls command to display sizes of folder contents?

Hello,
Say I run the command ls -lohS in terminal on my Home directory...
Mac-Pro:~ mike$ ls -lohS
total 0
drwx------+ 57 mike   1.9K Aug 31 16:52 Library
drwx------+ 32 mike   1.1K Sep 14 16:58 Desktop
drwx------+ 13 mike   442B Sep 9 18:25 Pictures
drwx------+ 12 mike   408B Sep 9 18:25 Documents
drwx------+ 8 mike   272B Sep 9 18:25 Downloads
drwx------+ 5 mike   170B Sep 9 18:25 Movies
drwx------+ 5 mike   170B Sep 9 18:25 Music
drwxr-xr-x+ 5 mike   170B Sep 9 18:25 Public
drwxr-xr-x+ 5 mike   170B Sep 9 18:25 Sites
drwxr-xr-x   2 mike    68B Dec 3 2010 Applications
I don't know what that size column shows for folders, but it's certainly not the size of the contents of the folder. How can I display this list, but with the sizes of the entire contents of each folder, including all of its subfolders?
Basically, I need the Terminal equivalent of opening my Home folder in Finder, Clicking Show View Options, clicking Calculate All Sizes, and then sorting the Size column descending.
Thanks for any help you can give!
-Mike

du
See man page for options.
For example:
     du -hd1 ~
     du -kd1 ~

Why can't use adobe flash and witch app can I use to see movies on my ipad2 that requires adobe flash

Why I can't install adobe flash player when I want to see a movie that requires adobe flash player and what app can I download that does the same that adobe flash player

madelinefrommoca wrote:
Why I can't install adobe flash player when I want to see a movie that requires adobe flash player and what app can I download that does the same that adobe flash player
Because there is no such thing as Flash for iPad

TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

How can i use Unix database in java?

How can i use Unix database in Java?
Message was edited by:
JPro

I have not a clue about FoxPro, but the db then is FoxPro and not Unix. The better question would be "How do I connect to FoxPro DB running on Unix with JDBC?".
My answer to that would be, search the Internet for a JDBC driver.

How can I use UNIX "ls -lt" command in JAVA?

I have a piece of java code whose function is to search for all
the files in a directory and attach the time of the file creation.
How can I do it? Also, I know that in UNIX, "ls -lt" will give me
all the file names and the creation times. So how can I use "ls -lt"
in Java?

O,I see you have notice my friend tsith,its not really about what language is better its about what language is better to start off with,this is the twist and the diffrents to other postings and so far I have not seen a good argument saying y java is a better language to start off with.Anyways the ? still stands is java a better language to start off with then c/c++???.If you ask me c/c++ is better and I am just waiting for a good argument to give my reasons.Anysways good to see you are still around tsith ;-).

Can I use redhat or Sco Unix server as install server......

to install x86 solaris 8?
I can't setup_install_server on redhat7.0 and Sco unixware with error "bar" or "mach" etc.
which type of unix can I use for install server?

Solaris sun/intel ....!!

Can i use java mail APIs to read Unix mail

hi
can i use java mail APIs to read Unix mail?
Unix has "mail" command which can be used to access mails on the Unix system.
is it possible to execute mail & access unix mails remotely using POP/IMAP
thanks in advance

There are JavaMail providers that allow you to access the Unix mail spool files directly. Alternatively the standard JavaMail API can access a POP or IMAP server, if one is installed.

Witch version oepe-all-in-one-juno can I use to do create osb configuration

witch version oepe-all-in-one-juno can I use to do create osb configuration project ?
I use ubuntu 12.04 64

You can check all these out via the Web Part Maintenance Page. After the PageName.aspx, add ?contents=1 and you'll get a list of the webparts that are open and published on the page.
You can't do too much here but you can reset the parts that you think might be causing the problems.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

I get "App Store Disabled" on my MacBook Pro due to profile issues. What Terminal command can I use to reset profile settings?

After transferring documents from one MacBook Pro to another I get some weird errors due to settings that seem to have transferred over. One is that the Mac App Store is disabled.
Are there any Unix / Terminal commands I can use to reset these?

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.

How to format new hard drive for Apple TV when you can't use old HD

I need to know how to format a new HD to install in my Apple TV where I can't use the old HD to clone or otherwise create the new structure on the new HD.
I have an Apple TV that was syncing to a Mac Mini that had a defective HD and logic board. I was unable to backup the Apple TV to the Mac Mini for some time before I had the mini repaired by AppleCare.
When the mini came back, it registered on the Apple TV as a new computer and I couldn't sync with it without losing hundreds of dollars of content.
All was okay until the other night when Apple's defective update for the ATV erased ALL my content. I updated it to 3.1 this morning, which Apple indicated might fix the problem. It didn't. The old content is all gone.
My ATV is out of warranty, so I removed the old HD and copied the files from the "Purchased" folder to my mini. That saved most 101 items that I purchased since 12/08 (but not all for some reason). I lost all content prior to 12/08 that I purchased, as well as some content since 12/08 that I purchased.
I need to keep the old HD untouched until I can purchase data recovery software. I'd like to just put a spare IDE HD in that I have into the ATV and just start over with what is in my Mac mini iTunes.
So, how does one do that? I'm not gifted with vast Unix knowledge or experience and I don't want to clone the old HD and risk losing more data if it writes to the HD for some reason.
Thanks.

Hi Atagahi,
Firstly, have you emailed Apple iTunes support indicating your issue? There have been instances in which Apple will allow re-downloading of all content you've purchased on the iTunes store.
Secondly, I highly recommend you get an external usb hard drive, attach it to your mini and use it as a Time Machine drive to keep your iTunes purchases safe. It's a fact of life that all hard disk drives will eventually fail. The Apple TV should never be used as any kind of permanent storage space; think of it as a 'temporary holding' zone. And as you've unfortunately already experienced, a glitch wiped out all content on the Apple TV.
As regards your original question, it seems like there have been folks who've done just that...taken the internal drive in the Apple TV out and attached it to a mac and copied files from the Apple TV hard drive. I have not had to do such, so I cannot offer any help here except for Linda's suggestion on googling the net for solutions.
Good luck and hope you get all your purchased content back Atagahi!
Message was edited by: Alec

OSX tiger installed, can I use boot camp

Looking on the apple websire it seems that i can only use leopard for an OS if i want to use Boot camp, am I understanding this right?
Just wanted to be sure before i bought leopard just so i can run boot camp. I have had my mac a year and actually found a need to run windows, and nothing else will work as well.
thanks

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion.

HT1461 Can one use boot camp to play computer games normally only found for PCs?

I have some older computer games, specifically Warhammer 40k rts games, that I woud still like to play and was curious if boot camp would allow me to play those on my mac? Also, if it is possible am I putting my computer at risk in any way? I'd like to play them but not so badly that I would be damaging my mac pro or shortening its lifespan. There dont appear to be any emulators out there currently so I'm checking here to see if anyone knows anything.

Yes. There are several ways to run Windows on the Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How can I use "t3://becluster:6001" rather than "t3://dcsv02,dcsv01:6001"

          I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic server
          5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          I try to make a t3 connection between the PC and the cluster of machines.
          On the Windows PC I have the following configuration for the
          "c:\windows\system32\drivers\etc\Hosts" :
          171.1.70.61     becluster
          171.1.70.62     becluster
          where
          "171.1.70.61 is dcsv01 and
          171.1.70.62 is dcsv02 "
          If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          I have a great failover mechanism : if any of the machine (dcsv01 or dcsv02) are
          down the requests are routed to the other one.
          BUT!! If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          I have a not great failover mechanism :
          say that my windows hosts file looks like :
          171.1.70.61(dcsv01)     becluster
          171.1.70.62(dcsv02)     becluster
          then if dcsv02 is down then all requests are routed to dcsv01 and that is fine.
          BUT!! if dcsv01 is down then I got on my PC the
          "Bootstrap unable to get a t3 connection to dcsv01" exception and failover does
          not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          So how can I use
          "t3://beclsuter:6001" rather than
          "t3://dcsv01, dcsv02:6001" with the same failover service????
          Thanks


          Thanks mike,
          In a UNIX or windows environment how can I get a DNS server that round robin?
          "Michael Reiche" <[email protected]> wrote:
          >You need to have becluster defined in a DNS that round-robins.
          >
          >Mike
          >
          >"Martial" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic
          >server
          >> 5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          >>
          >> I try to make a t3 connection between the PC and the cluster of machines.
          >>
          >> On the Windows PC I have the following configuration for the
          >> "c:\windows\system32\drivers\etc\Hosts" :
          >> 171.1.70.61 becluster
          >> 171.1.70.62 becluster
          >> where
          >> "171.1.70.61 is dcsv01 and
          >> 171.1.70.62 is dcsv02 "
          >>
          >> If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          >> I have a great failover mechanism : if any of the machine (dcsv01 or
          >dcsv02) are
          >> down the requests are routed to the other one.
          >>
          >> BUT!! If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          >> I have a not great failover mechanism :
          >> say that my windows hosts file looks like :
          >> ..
          >> 171.1.70.61(dcsv01) becluster
          >> 171.1.70.62(dcsv02) becluster
          >> ..
          >> then if dcsv02 is down then all requests are routed to dcsv01 and that
          >is
          >fine.
          >> BUT!! if dcsv01 is down then I got on my PC the
          >> "Bootstrap unable to get a t3 connection to dcsv01" exception and failover
          >does
          >> not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          >> So how can I use
          >> "t3://beclsuter:6001" rather than
          >> "t3://dcsv01, dcsv02:6001" with the same failover service????
          >>
          >> Thanks
          >>
          >>
          >>
          >
          >

Witch SAPGUI can be used in UNIX OS.

Similar Messages

Maybe you are looking for