Witcher 3 Preorder 10$ points reward

Hello,
I bought The Witcher 3 : Wild Hunt Preorder on 2/16/2015. I then picked up the game on release day.
I preordered on the Best Buy website, and selected in store pickup.
I have yet to recieve the rewards certificate offered for pre-ordering. Please advise how to recieve my $10.00

Hello zpost,
That’s really strange. I see points added to your My Best Buy account, but I also see that you pre-ordered other games on that day besides The Witcher: Wild Hunt.
I'll need the exact purchase information to see if you've received the points. Please send me a private message by clicking the blue box at the end of my signature. Make sure to include the "Customer Service Pin" from your pre-order and purchase receipts or the BestBuy.com Order Numbers.
Blake|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

Missing preorder bonus points

I preordered Far Cry 4 before the release date for in-store pickup. Picked it up on release and the bonus preorder purchase points has not shown up yet. Please help. Thank you.

Greetings ironmango, and welcome to the Best Buy forum,
I looked over your BestBuy.com order and My Best Buy™ account using the email address you registered with the forum, and from what I can see, your order for Far Cry 4 was not technically a pre-order and that is why 500 bonus points have not been awarded. Our system works off the central time zone being that we are located in Minnesota, and while it may have still been 11/17/2014 in California at the time, our system was already transitioned over to 11/18/2014.
I would like to go over your My Best Buy™ account with you in a bit more detail and to see if there are any other questions I can help answer, so I will be sending you a private message. To check your private messages, you will want to login to the forum and click on the little yellow envelope icon at the top of the page. I look forward to further speaking with you.
I hope you have a wonderful day, and thank you for connecting with us!
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Scan receipts and attach to travel expense report (max.points rewarded)

Hello All,
Could anyone please tell how the process works in r/3 for scanning receipts and attaching them to travel expense report. Please send any config documents, links or technical specs. Its very very urgent.
Thanks & regards,
Latha

receipts can be attached in PR05

Error while displaying own reward points

Hi everybody,
I'm experiencing some problems while trying to view the detail of my reward points (you know, when you click "Your Reward Points", then the rightmost link that says "Points rewarded..."). I'm getting this message:
Error en tiempo de ejecución del portal
Error ocurrido durante el proceso de una solicitud para :
iView : N/A
Componente : N/A
Access is denied: com.sap.portal.system/applications/com.sap.sdn.crp.components/components/report - security zone:com.sap.sdn.crp/no_safety.
Exception id: 03:42_15/02/05_0018
See the details for the exception ID in the log file
Any idea? Thanks!
BR,
Alvaro

> Hi, I know now hat you mean. The comment field. It
> did never work, I reported this some while ago and I
> got the reply that this was a bug that will be
> fixed.
>
> Eddy
I'm getting the same error.
What you mean Eddy with <i>The comment field.</i> ?

Rewards Points feature in KM (like SDN forums)

Hi,
Is there actually any kind of "r e w a r d - p o i n t s" feature, available in Collaboration Forums?
thanks in advance,
PD: I am in 2004s EP 7.0 SP15

Hi Leandro,
the new forums functionality allows the users to mark answers as useful. You can configure in the Forums Admin Console under Expert Feature how many answers can be marked as helpful, but unfortunately you can no distinguish between helpful and very helpful. Furthermore the Point & Rewards System component is completely missing, so you need to develop here something yourself in order to get the point statistics from the database. There is already an existing report "Users with Questions and Rewards" that you can find in the Admin Console under Reports, but I'm afraid this report alone might not be detailed enough.
Hope this helps,
Robert

How about two SDN "blogspaces" : one FOR points and 1 NOT FOR points ?

I suggest that the current SDN logspace be divided into two subspaces:
one for points: this is where technical and/or non-controversial messages would be posted and be rewarded according to the current rules
one not for points: this is where folks would post "controversial" messages (technical or non-technical) that would not get any point reward.
I would personally prefer to post in the "not for points" subspace, for several reasons.
But I'd prefer to see what others have to say before saying what they are.
By the way, there's a US expression "preaching to the choir". The new blog (for no points) would be for those who are not necessarily "preaching to the choir".
djh

david,
i think i do understand your intention and therefore agree with you.
IMHO, the blogsphere here on SDN, as execellent as it is, is kind of a 'posing platform' rather than a discussion space. People do post their contributions, receive their points reward and expect some congratulations and cheering if anything at all. I happened to me that people got upset when I questioned the use or correctness or usefulness of some of the content of their blogs. When it did this with the intention to discuss matters, I recognized that people actually didn't want to discuss their contributions.
Of course the things said above do not hold true for for a big number of contributors.
The same thing thing in the forums. A lot of people do provide very valuable answers but often not discuss matters when points are already given.
So having a discussion area, free of the rewards system's pressures might be a helpful addition. Something like a discussions corner. In Vienna we call this 'Kaffeehaus'
A place where you post some free thought where you don't have to justify the minimum blog reward points, where you don't have to apply the care expected in drafting a blog, etc..
Just freestyle discussion on useful or not so useful topics.
regards,
anton

24 points for a single answer

Hi SDN team,
i can't stop complaining about getting more than 10 points for a single answer
Please have a look at this Re: Inexisting BAPI_FLIGHT_GETLIST in our SAP system IDES. There are 4 * 6 points rewarded, which is nice, but not correct at all.
Best, Stefan
PS: Before i forget it, i do <b>not</b> want to have all the points removed (like it happened the last time i complained), 6 of the 24 are earned and ok.

Hi Stefan,
We have closed a hole in the point system last weekend. Let us know if it happens again.
Thanks for letting us know, Mark.

Break Point in BTE function module

i have function modules being triggered from 00002010
00002020 BTEs for tcode F110.How do i set break point in them .i mean is it posible 'coz i guess a session is being created every time i run f110.
Please help.
Thanks and Regards,
Venkat

1. Set a break point in your function module.
2. F110 Schedule a payment run (Specify a start time - Do not check Start immediately)
3. SM37 - Select your job and enter '=JDBG' in the command field
4. Continue and and the program will stop at you break point
Reward points if helpful

Remove decimal points from variable.

Hi,
I have a little issue.
I have one variable v = 25.000
and i want to remove (.000) from this variable so my result will be only 25 and i want this.
So, is ther any function to remove this?
I want to do it in one shot.
No 2-3 statements.
Points rewarded soon
Regards
RH

Hi Ronny,
You move this variable data to an integer variable.
Data: v_tempint type i.
move your_variable to v_tempint.
v_tempint will have the required result.
Reward points if this helps,
Kiran

Missing Sunset Overdrive Bundle Preorder $10 Bonus

Hello,
My order for the Sunset Overdrive bundle is missing the preorder bonus points (referring to the $10 bonus). It has been right around 20 or 21 days since it has arrived, and all my other points for the purchase were awarded shortly after shipping. Can you please take a look and help me claim the $10 preorder bonus? Thanks and please let me know what information you need.

Hi ziggs77,
Thanks for reserving and purchasing your Sunset Overdrive Xbox One bundle with us! I hope you're enjoying the game and new console so far.
I've had the chance to review your account and it looks like your pre-order bonus certificate for this title was awarded earlier today. You should see record of the associated points in the next 2-3 business days, so make sure to keep an eye on your points balance on BestBuy.com for updates.
Let us know if you have any questions or if you need any additional assistance.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Field point VI

I would like more information in the right method for programming the Field point.For example if i have a big application with more VI call the tag,The open FP is for all VI or just in VI?.If exist a detailled documentation for programming Labview application in Field point VI.
Nicola
Bytelabs.it

Thank's Andre but i have more ask detail.
If i have a main Vi witch open Field point, after i open from this VI another VI dinamically (VI SERVER with player) this second VI have also an open VI and close VI after the closure of this(If i don't open the FP the VI don't run correctly).
It's this the right method.I have need more information of Field point VI in VI SERVER METHOD.Thank's Nicola
Bytelabs.it

Shipping point 01 loading group plant storage location not defined.

Hi All,
I have a unique problem where iam getting the above error when sales order is created using incomplete log.
I have checked all the settings related to Shipping point
in OVL2 Shipping point are assigned,
in OVL3 picking location is also assigned.
I have been searching entire SDN and help.sap.com for the above error for last three days and post a new thread.
Please help, points rewards.
Regards,
Vinod.

Dear Vinod
First of all I am really happy that you have taken the trouble to find out a solution to your problem and since you were not able to get it, you had posted a new thread. Of late, this is very rare people searching the forum b4 posting.
Coming to your problem, go to customer master Sales Area tab and see in Shipping tab, what Shipping Condition is maintained. Ensure that the same is maintained in OVL2.
Similarly, the same for Loading Group. Normally, by oversight, people commit mistakes by maintaining differently which is not assigned in masters and this would have missed your attention. For example, you would have assigned 01 in customer master and in OVL2, you would have maintained 03.
Also, please ensure that in OVXC, you have assigned shipping point to your plant.
thanks
G. Lakshmipathi

Shipping Point Assignment to Plant

Hi,
Can anyone tell me the T Code to assign Shipping point to plant.
Though. I have defined plant in Enterprise Structure, when i go the assignments and try to do this assignment there is only the standard plant appering in the structure and hence am not able to assign the Shipping point for my plant.Am working on ECC 5.0
Regards,
Tommy

Hello Tommy,
Shipping point to plant assignment T Code : OVXC
Shipping point determination path:
spro>logistic execution>shipping>basic shipping function>shipping point & goods receiving point determination-->assign shipping point
Reward if helpful.
Regards,
Priyanka
Message was edited by:
Priyanka Dixit

SDN Forum points vs Sun Forum Duke Dollars

I believe that a points system is a great way to encourage participation by the community in problem solving.
With the points system in SDN, however, there is room for abuse, for example, by having people you know award points to you on threads.
I personally like the points reward system (Duke Dollars) on Sun's Developer Forums. In this scheme, you work with credits. Every user is given a certain amount of points (Duke Dollars) when they join. When you post a question, you can assign a number of Duke Dollars up front from your available credit as a reward to entice responses. You can also accumulate more Dollars by answering threads which have Dollars assigned.
Every month, Sun gives a gift to the user who has accumulated the most points.
I'm not sure that this solves the problem of users not assigning points for valid help, but, because users are working with limited credit, it does force them to be careful when assigning points, and prevents abuse as that mentioned above.
I would like to hear what other people think about this scheme. Perhaps there are aspects I have not considered.
Regards,
Martin

Would a moderator make it more positive?
Actually Craig went into each of the forums and published a "rules of engagement". Maybe that kind of a "sticky note" post would be the place to remind people about the inappropriateness of redundant questions (across various forums) and the confusion and poor sporting behavior associated with "copied" answers. I can ping Craig with that suggestion to add text if you think it makes sense to "remind" people in each of the respective forums.
Or..to be a little more provocative, we could suggest that community members who have a good track record of participation, collaboration, and exemplary attitude be given the moderator rights in forums where the activity volume might be too overwhelming for an SAP moderator alone to manage and given the rights to move content to a more appropriate thread.
This is what I meant about "self-policing". Also, perhaps the moderators (internal as well as SAP) could identify themselves in a sticky post and invite participants in those designated threads to track "abuses" or issues, thus identifying them and hopefully resolving them publically.
Strange, it reminds me that in old, Puritanical, America, of the 17th century community culprits were subjected to a public dunking or stocks when they broke the law. The purpose being that public condemnation sent a clear message to other "would be" misbehavers.... and thus deterred further bad conduct.
While a rather radical and unpleasant method it was an open way of dealing with abuses to the system.
Perhaps others can offer less extreme and more effective suggestions here
Marilyn

Witcher 3 Preorder 10$ points reward

Similar Messages

Maybe you are looking for