With 5th gen nano, how to display album artwork during playback at all times, it stays on for a few seconds and then the screen goes black? Is there a way to play and see artwork, at all times (using with a aux. speaker)
I have a 5th gen nano, and I play it often on a aux. speaker. I would like the album artwork to display at all times while playing it here. Right now it plays for a few seconds on each song, and then goes blank. Can this be changed?
The artwork turns black or the screen's backlight turns off? If the backlight turns off, simply disable the backlight timer, but keep in mind this will significantly reduce your iPod's playback time and battery life.
B-rock
Similar Messages
-
every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8, every time i click an action the screen goes black until i unclick. making it impossible to see my work. photoshop cc/ windows 8
I've had the same problem, and sorted it using this:
Run the Boot Camp Assistant in OS X as normal and create a partition when asked, then insert your Windows 7 disc to reboot and begin the process proper.
Windows 7 requires the NTFS file system, so once in the installer just select your new partition (labelled BOOTCAMP), click on Drive options (Advanced) and choose to format it. Then select the newly formatted partition and continue.
Windows 7 will begin installing, and once it gets almost to the bottom of its checklist, it’ll try to reboot. Now, if you leave it here, you’ll get so far and see the black screen. Any further attempts to reboot will bring you to the same dead end.
Instead, restart and press a key to boot from the Windows 7 disc when prompted.
Rather than running the installation again, choose the little option at the bottom to Repair your computer. Decline any suggestions that pop up until you see a list of options with Command Prompt at the bottom. Choose that option.
At the Command Prompt, type DEL C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMDAG.SYS to delete the default ATI driver, then close the window and reboot.
This time, Windows should successfully initialise a more appropriate display driver, allowing you into the desktop. From here insert your OS X disc to install the relevant hardware drivers as you normally would, then run Windows update to clear up any leftovers.
Read more: How to install Windows 7 on the new 27in iMac | PC Pro blog http://www.pcpro.co.uk/blogs/2009/10/26/how-to-install-windows-7-onto-the-new-27 in-imac/#ixzz0tinWW9tn -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
PlayBook lags and then the screen goes black and does not respond
Hello guys,
As the Subject line summarizes, my tablet was working like charm since the date of purchase, back then in April last year. However, on these days it has been performing weird. It has always been fast and smooth, but since last week it has been lagging and not no responsive to the touch.
To tell you gusy fast and clear, it boots up as normal, fast and smooth, apps open and close as usual. Then it starts to lag, and freezes for one second, responds and freezes again but this time will not respond again and finally the screen goes black and stucks there until I make a hard reset and it reboots normally, until it does it again, and again.
Relevant information:
16GB model, 1.5GB free storage available, sideloaded a few android apps today, recorded a few videos
the device manager software on the pc makes no difference, as the PB will anyway freeze and go all black even if it's backing up or something.
HELP?Make sure any important data is backed up preferably by drag and drop to a pc.
When it is working properly, try gently squeezing the playbook between finger and tbumb around the black bezel border. Especially either side of the lower sockets. If it goes black it's probably a bad battery or screen contact.
1.5 GB is not much spare storage, by the way. I would never fill more than 75%. -
I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
GinaWhat your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac. -
Boots to black in OS X mode (I believe 10.10.2? tough to check right now). I can boot into Windows 8 using Boot Camp without incident. I have booted to Disk Utility and run Disk and Permissions Repair. I have booted into Diagnostics, and no issues were found (ADP000 was the Reference Code given). I reset the PRAM, which gave a louder chime than I had been getting when failing to start up OS X, but otherwise no change. Feeling that my options were exhausted, I attempted to restore from Time Capsule, and it won't connect to Time Capsule, despite Time Capsule being the active router whose network I am connected to. Please advise.
(This is my girlfriend's computer, she tells me that she selected an option to perform an automatic update later, that night.)Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
This should install the version of OS X that you had installed.
Be sure you only work on the OS X volume, not your Windows volume. I cannot tell you if you will still be able to boot the Windows volume after the above. You will need to find a fix for that. -
The Apple logo just flashes on and off and that keeps on repeating what do I do?
Plug it into a computer running iTunes and restore it.
-
Firefox comes on, I go to a site rich w/ visual content & then the screen goes black & then white w/ with a bubble from the bottom bar saying recovery from igfx display failure..this used to happen on my Chrome browser (the Chr browser recovered spontaneously But I removed & reset it... still the problem went on & I quit using Chr for2-3 mos. There never was a problem on Opera. Hey! OPERA rule. As foe IE 8. That instrument is completely useless. Even all areon IE appears to be dead...Thanx!
Try disabling hardware acceleration in Firefox.
https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration -
I have a phone 3g and everytime I go to open facebook or bejewelled blitz it will not load. It crashes and then the screen goes black for a few seconds before going back to the home screen. I have uninstalled this app and reinstalled it on a few occassions but now it will not even go the facebook homepage. It sometimes also happens with other app.
The problem corrected itself,....i tried to delete the post but could not do it.
-
I have an ipod 1st generation and i cant get the games to play. I tap on a game and it shows up for a few seconds and disappears. I can see that when games pop up they say loading on the bottom. They have all been downloaded for awhile. I'v tried restarting ipod by pressing on/off andhome button at the same time and that didnt work.
What is the Other on my iPhone and How to Remove It
Also
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on. It doesn't do anything. I had just charged it. How do I get my iPhone going again? What happened?
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release. -
I have a iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it
Standard troubleshooting steps in order are as follows:
Power the iPad off and on.
An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPad with iTunes from your iPad's backup.
Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after the last step, your iPad has a hardware problem. -
i have just bought an ipad2 from usa. now i am in india. i am a first timer user of ipad. i have charged for three hours, when i start iti.e. on the device it shows a plug in icon with itunes. then the screen turns black. i am not able to use the device. kindly help
You need to plug the iPad into your computer that has iTunes installed on it, and activate it.
The User Guide would be good for you to read:
http://support.apple.com/manuals/#ipad -
Hi,
I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
Any ideas? Thanks in advance!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?
Have you just tried repairing with Disk Utility?
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Maybe you are looking for
-
How can I remove all photos from my iphone?
How can I remove all photos from my iphone?
-
I have my internet set up through an airport extreme with an apple tv 2 connected to my tv. I just moved apartments after the school year, so the airport sat unplugged for about two months, I moved into my new apartment for the school year and wanted
-
Windows 8.1 trying to download Adobe Reader but keep getting error 1406. Help!
I am trying to download adobe reader and the only one I am able to install is the adobe reader touch app... please help!
-
Controls[] Cluster Property slow to run
Hi, I would like to register controls inside clusters for mouse events. Since there are a lot of controls to register, I want to do it programmatically and I created a VI that searches for control refereces inside cluster with recursion. The problem
-
Keep Getting Annoying Image/File Upload Error Please Help!
I keep getting this error message - can't upload image X.png, it seems to happen with several different image - then I try to resume/retry wait some time; sometimes it works and sometimes it doesn't, getting kind of frustrating. Please help! http://