With 7.1 "Share WiFi Settings" no longer works for A3 Pioneer Speaker setup

I am nolonger able to link my Pioneer A3 Speaker with my WiFi network by plugging it into my iPhone or iPad, no message asking "Share the WiFi Settings". I have used various cables, re-booted WiFi and devices etc so conclude either my A3 has suddenly broken, or the 7.1 updates messed things up.
Section E in this PDF is the instructions I have been following https://www3.pioneer.co.jp/support/manual/wss/sma1_3_4/pdf/ARH7143C.pdf
Anyone else with this sort of issue ????

Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

Similar Messages

  • Previously succesful public wifi connection no longer works for Ipod Touch?

    I work at a small airport in canada. Free public wifi is available via an Aliant Hotspot. I've used my Laptop on many occasions there. When i purchased my Ipod touch, 4th generation, it worked fine too. Until recently. Now, the touch recognizes that the network is there. it connects, or so it appears, but the welcome page will not load to allow me access to the interent. Please help me! Normally, as soon as i choose my hotspot network, the welcome page comes up, allows me to select my language.... legal agreements... another page as a welcome, and then full access the internet.... now nothing.
    I'd be so grateful for some help!

    Diane,
    You're very welcome, I know that is some kind frustrating when a problem appears and it's quite difficult to find the solution.
    So let's trying with this:
    Based on your feedback it seems that the iPod is receiving correct data from the router, what we can try here is the following:
    Connect the iPod touch into the network, and copy the network data (IP Address, Subnet Mask, Default Gateway, DNS) into a piece of paper, then in the iPod Options of the network, there must be a button indicating DHCP, now press a button that must say Manually and the network data will be erased, then you must capture the information that you had copied in the paper.
    When you finish, wait a couple of seconds and then do a test.
    Here I have a question, you said that the iPod worked fine until recently, so another tip is try to connect your iPod to another network, this may discard that the problem with your iPod could be a hardware problem.
    But first try with the insertion of the data manually.
    We keep in touch!,
    :: Appletoch ::

  • My friend should be able to sync her iPad and iPod so that she can stream information between the two devices and her computer. Her brothers were right next to her and did the same thing with there devices and same settings and it worked for them.

    What would have went wrong because she should have been able to sync all three together at the same time? Her I pad is new so  restoring may be an option to make sure her settings are correct for this process. She doesn't use iCloud so she backs her information up to her computer.

    There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
    http://www.unwireddevicelink.com/features/
    https://meraki.cisco.com/products/systems-manager
    and Apple's system:
    http://www.apple.com/osx/server/features/#profile-manager
    I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
    Regards.

  • I'm using the latest version of Firefox V29.0.1 Firefox cache settings no longer working for SWF files. can you help on

    Firefox caching on SWF files (Adobe Flash files) are not caching at browser level. But the same SWF Files are caching at other browsers like Google Chrome and IE.
    But when i see the about:cache service information, I can see SWF Files are there in the disk cache device. When ever i hit the same page, the SWF files are downloaded from the server not from the browser, but the fetch count for that SWF file will get increase in disk cache device. So it's taking time to load the SWF files every time when i hit the page.
    I'm requesting your help on this SWF File caching.

    <i>Moderator Comment<br>
    (Duplicate thread closed. Continue at [/questions/1000178]) -m) </i>

  • HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    Giancarlo Messalli wrote:
    1) are you sure a reset holding the reset button will not delete my data?
    Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
    For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
    2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
    Thank you again
    I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
    Here is the Apple info on reset.
    http://support.apple.com/kb/ht3728
    And here is the quote from the horse's mouth so to speak.
    Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

  • I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

    I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

    Have you rebooted your home router?

  • My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • HT1918 I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password,  how do i activate the songs?

    I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password,  how do i activate the songs

    Welcome to the Apple Community.
    The following article(s) may help you.
    Look up your old and forgotten Apple ID

  • HT1386 After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.

    After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.
    Followed the FAQ's on the Apple Support but no joy.
    Anyone knows what more I can do?

    In iTunes under the Store tab try Authorizing the Computer

  • HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

    I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

    What model and firmware is the 2TB TC?
    What firmware is the AE?
    Does the AE get good signal from the TC in its current location?
    Signal can only be extended that is received intact.
    Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
    I am fairly sure you are going to tell me your TC is AC model..
    I would do a couple of things..
    1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
    2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
    3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
    Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
    http://support.apple.com/kb/HT5606

  • Old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader

    I made a series of interactive ebooks wiith Adobe Acrobat Pro. They worked fine in the old Adobe Reader. But now the commenting feature does not work properly either in Adobe Reader DC or Adobe Acrobat DC.  When I open the comments, everything slows down or else I get blank pages. The tools are not usable. There seems to be some compatibility issue between what was done in these books with the commenting tools and the new applications. Has anybody experienced the same?

    Hi Anubha,
    Thanks for your reply. With the new Acrobat Reader DC, I have the same problem on two computers, one with Windows 7 and one with Windows 8.1. I downloaded a trial version of Adobe Acrobat DC on the computer with 8,1. Then I found out that I had the same problem with Acrobat DC as I did with Reader DC.
    I made these e-books with Acrobat Adobe Pro 11. I never had a problem with Pro 11 or with previous Readers. Also I have sent these e-books out to other people who had Reader 11 and they had no problems. Now it seems that the books are not usable – at least in the fullest way -- for me or for anyone else using the latest version of Reader.
    Any help would be appreciated. I have put a lot of work into these e-books.
    De : Anubha Goel 
    Envoyé : April-21-15 12:47 AM
    À : michael jaegermeister
    Objet : You have been mentioned by Anubha Goel in Re: old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader in Adobe Community
    You have been mentioned
    by Anubha Goel <https://forums.adobe.com/people/Anubha+Goel?et=notification.mention>  in Re: old files with a large number of comments no longer work properly in either Adobe Acrobat DC or or Acrobat Reader in Adobe Community - View Anubha Goel's reference to you <https://forums.adobe.com/message/7456900?et=notification.mention#7456900>

  • I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.

    I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.
    What does it take to make sure it works ????
    Thanks

    If you successfullt restore to factory defaults/new iPod and still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Command plus is no longer working for me correctly in Safari 8.0.2.

    Command plus is no longer working for me correctly in Safari 8.0.2.  When I use it to zoom in a safari window, it makes fonts bigger instead of scaling the entire page bigger like it used to.  What changed or what did I accidentally change?   This  is only happening in Safari.  When I use Command Plus in a Chrome or firefox browser window, it works perfectly still.
    To explain this a little better,  I have a 27" iMac.  When I open a browser widow in safari like yahoo.com,  The content fits in about a 10.5" section of the screen.  If i go to full screen or enlarge the window to fit the full screen the same 10.5" content is centered in my screen.  Previously, I could use Command Plus to zoom and the entire page would scale increasing from 10.5" to eventually filling the screen.  Now when I use command plus, the font's get bigger and bigger but the page width stays at 10.5"

    Hi petraidm,
    Welcome to the Support Communities!  If I'm understanding you correctly, it appears you have updated Safari to the latest version, but are still using Mountain Lion as your operating system, is that correct?
    You may need to adjust your screen resolution, or the zoom settings in the Accessibility pane of System preferences.   Usually, zooming changes the size of text or content in a window -- not the size of the window itself.   So I usually go to full screen mode in Safari, and then zoom in if I need to enlarge the text.
    OS X Mountain Lion: Zoom content on the screen
    http://support.apple.com/kb/PH11488
    If you have difficulty seeing or reading items on the screen, you can use Accessibility preferences to magnify items on the screen. You can zoom the entire screen or zoom the area that has keyboard focus in a separate window.
    Set up zoom
    Choose Apple menu > System Preferences, click Accessibility, and then click Zoom.
    Do either of the following:
    To zoom with keyboard shortcuts, select “Use keyboard shortcuts to zoom.”
    To zoom with your mouse or trackpad, select “Use scroll gesture with modifier keys to zoom.”
    Choose where the magnified content appears with the Zoom Style pop-up menu.To display it in a window near the mouse cursor, choose Picture-in-picture. To display it on the entire screen, choose Fullscreen.
    To set options for zoom or the zoom window, click More Options.More Options panel
    You can also turn on zooming by pressing Command (⌘)-Option (⌥)-F5 and selecting options in the Zoom section.
    Zoom with keyboard shortcuts
    To zoom in, press Command (⌘)-Option (⌥)-Equal Sign (=). To zoom out, press Command (⌘)-Option (⌥)-Minus Sign (-).
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose the Fullscreen zooming, the entire screen displays the magnified image.
    Zoom with a mouse or trackpad
    To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
    For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
    If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
    Last Modified: Aug 8, 2013
    OS X Mountain Lion: Shortcuts for Accessibility preferences
    http://support.apple.com/kb/PH10566
    Turn zoom on or off
    Command (⌘)-Option (⌥)-8
    Zoom in
    Command (⌘)-Option (⌥)-Equal Sign (=)
    Zoom out
    Command (⌘)-Option (⌥)-Hyphen (-)
    Turn image smoothing on or off
    Command (⌘)-Option (⌥)-Backslash (\)
    Display the zoom window when needed
    Hold down Option (⌥)-Control (^). Release to close the window.
    OS X Mountain Lion: Adjust your display resolution
    http://support.apple.com/kb/PH11462
    I hope this information helps ....
    - Judy

  • Digital card reader no longer works for Windows 7 Pc, 3yrs old

    Help, my digital card reader no longer works for Windows, 32bytes, on my 3 year old pc.  HP does not have any any down loads for this.  Any suggestions where else I can find them that would not interferre with other functions of my pc

    Hi,
    What is your machine ? The following devices may help:
       http://www.ebay.com.au/bhp/usb-card-reader
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My facebook app no longer works for my iphone after i sync it to my laptop!

    Why does my facebook app no longer works for my iphone after i sync it to my mac book pro?
    I added this app for facebook and then i synced it up with my mac book pro, but afterwards it lost the app, and I can't download it anymore... why is that?
    And how do I manage to put it back on my iphone?

    Hello hersheygirle,
    Welcome to the Discussions Boards.
    Re-download the Facebook APP on your computer and then sync it to the iPhone.
    Make sure your computer is logged into the same iTunes ID that shows up on your iPhone when you try to download an APP on the iPhone.
    http://support.apple.com/kb/HT2519
    Hope that helps,
    Charles H.

Maybe you are looking for