With a bluetooth keyboard is there a shortcut that controls the bold text feature in Pages?

I have a Kensington bluetooth keyboard for my Ipad2. Is there a keyboard shortcut for the bold feature in Pages?

Hi Parexus,
I'm using a cheap keyboard i bought from eBay and i can actually type numbers in combination with the Ctrl button on the keyboard. So maybe there's some key you have to press and hold at the same time when you type numbers. Just try it out
Hope it works!

Similar Messages

  • I am unable to access my email. I can sign in with my password, then a message comes up that says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All plug-ins listed are enabled. What am I missing?

    I am unable to access my email from Charter.net. I can sign in with my password, then a message comes up which says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All of my plug-ins are enabled. What am I missing?

    After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

  • Using FiOS Mobile with a Bluetooth Keyboard

    My husband, who is blind, just tried using the new FiOS Mobile iPad app with a Bluetooth keyboard, and for the most part, it works well enough. However, several small but annoying problems exist for which neither of us have found a solution.  They are:
    1. No keys on the Apple Bluetooth keyboard do anything except the arrows. But sometimes it is impossible to navigate away from some of the buttons on the top end of the virtual remote down to the lower ones, especially the numbers buttons and the DVR control buttons.
    2. Since no other keys on the keyboard perform any function that we can figure out, it makes it difficult to use the Bluetooth keyboard for entering channel numbers without reaching over to the iPad first, causing the app to focus on the bottom half of the virtual remote, then using the Bluetooth keyboard's arrows to find, then press, each digit. This must be done fairly quickly. Why not just fix it so that the keys on the Bluetooth keyboard's numbers row do this job, and other keys, or combinations thereof, move focus to other virtual remote buttons? What's the point of having the Bluetooth keyboard and not being able to control the app remotely? My husband uses the app to control the set-top box, right? Either we're doing something very wrong, or it's a little on the half-baked side.
    3. And last but not least, we've tried selecting shows stored on the DVR via the app with the Bluetooth keyboard, and once again, either we're doing something wrong (probably), or ... you fill in the blank.
    The app does most things very well. A little more thought might have gone into labeling some of the buttons, and an explanation that some of them, like the Keyboard button, are toggles, but that's minor compared with the three aforementioned points. Hopefully these can be addressed, and FiOS, if you're really listening, my husband is ready, double-plus-willing and able to help you beta-test anything with which you can come up to make this app better.
    Thanks in advance.

    MarilynAndSteve wrote:
    My husband, who is blind, just tried using the new FiOS Mobile iPad app with a Bluetooth keyboard, and for the most part, it works well enough. However, several small but annoying problems exist for which neither of us have found a solution.  They are:
    1. No keys on the Apple Bluetooth keyboard do anything except the arrows. But sometimes it is impossible to navigate away from some of the buttons on the top end of the virtual remote down to the lower ones, especially the numbers buttons and the DVR control buttons.
    2. Since no other keys on the keyboard perform any function that we can figure out, it makes it difficult to use the Bluetooth keyboard for entering channel numbers without reaching over to the iPad first, causing the app to focus on the bottom half of the virtual remote, then using the Bluetooth keyboard's arrows to find, then press, each digit. This must be done fairly quickly. Why not just fix it so that the keys on the Bluetooth keyboard's numbers row do this job, and other keys, or combinations thereof, move focus to other virtual remote buttons? What's the point of having the Bluetooth keyboard and not being able to control the app remotely? My husband uses the app to control the set-top box, right? Either we're doing something very wrong, or it's a little on the half-baked side.
    3. And last but not least, we've tried selecting shows stored on the DVR via the app with the Bluetooth keyboard, and once again, either we're doing something wrong (probably), or ... you fill in the blank.
    The app does most things very well. A little more thought might have gone into labeling some of the buttons, and an explanation that some of them, like the Keyboard button, are toggles, but that's minor compared with the three aforementioned points. Hopefully these can be addressed, and FiOS, if you're really listening, my husband is ready, double-plus-willing and able to help you beta-test anything with which you can come up to make this app better.
    Thanks in advance.
    The number keys work fine on my Android BT keyboard, after I tap the keyboard item on the virtual remote.  I am also able to enter numbers when selecting a channel in the guide area.

  • Is there an app to control the volume of an iPhone 3GS?

    I have an iPhone 3GS and the volume keeps going all the way down once I plug the headphones in. Before this started happening the volume would go all the way up. Before that even started happening the phone would repeatedly try to shut itself off and I had to keep pressing Cancel.
    I did buy the phone off of eBay used, to try and go on a prepaid contract once my current contract ends. On the case itself, there are some minor scuffs and such, it does look like it was opened at a time. It still works perfectly, except for the volume glitch right now. Is there an app that controls the volume to keep it from going all the way down?. People say in forums and such to tighten the screws on the bottom (which I tried), and to also open the phone and see if there is anything blocking the volume control thing (like dust or anything) but I'm afraid to try that with the risk of causing further damage. What should I try?.

    to at least try and fix it if none of that works then replace it through apple

  • HT4111 I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessf

    I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessful.

    If you are using a Bluetooth keyboard on your iPad device, you should take advantage of the keyboard shortcuts for quicker access to copy, cut, paste, undo, redo, and other commands.
    Command + C : Copy Selected Text
    Command + V : Paste
    Command + X: Cut Selected Text
    Command + Z: Undo
    Command + Shift + Z: Redo
    Command + Delete: Delete everything to the left of the cursor on the current line
    Option + Delete: Delete the word to the left of the cursor
    Command + Up Arrow: Go to top of document
    Command + Down Arrow: Go to bottom of document
    Command + Left Arrow: Go to beginning of current line
    Command + Right Arrow: Go to end of current line
    F1: Dim screen
    F2: Brighten screen
    F7: Back one song
    F8: Play/pause song
    F9: Skip song
    F10: Mute
    F11: Decrease volume
    F12: Increase volume
    Eject button: Show or hide onscreen keyboard
     Cheers, Tom

  • I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  Now the cursor moves but cannot select anything.  Suggestions?

    I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  When opening up a browser or application, the cursor moves but cannot select anything.  Suggestions?

    Maybe something in these Apple support articles will help.
    Keyboard Doesn’t Work
    Keyboard Keys Do Not Respond
    Keyboard/Mouse – Troubleshooting Wireless

  • Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • HT5633 can my ipad model Mc820LL work with a bluetooth keyboard model number IH-B-IP2103

    can my ipad model Mc820LL with a bluetooth keyboard model number IH-B-IP2103

    iPads work with bluetooth keyboards.  What does this have to do with the Apple TV?

  • Why won't my new mac mini pair with my bluetooth keyboard or mouse

    I bought a new mini in December. I've been fighting with getting it set up since. It refuses to see/pair with my bluetooth keyboard or mouse. How am I supposed to proceed with setup if I can't even get off the start-up screen???
    1.4GHz
    1.4GHz dual-core Intel Core i5 (Turbo Boost up to 2.7GHz) with 3MB on-chip shared L3 cache

    The Bluetooth devices were probably paired with another computer. You need to "unpair" these Bluetooth devices before pairing with another.
    Try reading this:
    http://davemeehan.com/technology/how-to-reset-an-apple-wireless-bluetooth-keyboa rd-mouse-or-trackpad
    Good luck...

  • TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    Doubtful - why did the Remote app lose connection?

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

    i see that there are people that have the problem suddenly all notes disappear :
    this is with me also happend and now comes it
    when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

    Hello,
    Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
    Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
    On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT4314 I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    I have two children each with an itouch.  Is there a way of using the same AppleID but giving them separate game centre "me" users?

    See:
    Multiple game center accounts for...: Apple Support Communities

  • I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.   Later, when I tried to open InDesign I received the following error:  AMT Subsystem

    I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.
    Later, when I tried to open InDesign I received the following error:
    AMT Subsystem Failure
    The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
    I rebooted the computer and tried again:
    Licensing for this product has stopped working.
    You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.
    I can access Acrobat and MS Office programs, it's just the CS3 programs that I can't access. Can I uninstall and then reinstall CS3 without an access (un-lock) code?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

Maybe you are looking for

  • My most recent photos i downloaded in iphoto is not showing up in my events??

    I just downloaded over 700 photos, using most recent software update in iphoto, i am unable to view it when i look at "events" folder. any recommendations?

  • IPhone Battery????

    Hi. My IPhone is a 3G (I think) Model MB702LL. It was updated to version 4.2.1. Two days ago started to sign low battery but it seems it doesn't hold a charge.Though my battery level it's totally red I can still make/receive calls. I went to an Apple

  • FRM-10095 in Oracle Forms Builder Forms [32 Bit] Version 9.0.2.9.0

    Hello, I got the error message (in German) "FRM-10095 Ausführung in iewbdc_oracle_to_id, um E:\f021w32\src\ie\iewbdb.c:715 fehlgeschlagen". I got this error, when I tried to create a forms block using the data block wizzard on the Oracle-OE-table "o

  • How to establish communication between dynpro and Applet running in Portal

    Hello SDN, I have a problem with concept of my app and would be glad if You can help me.  -  I needed a graphics engine to draw a map during a dynpro runtime, and i made applet for it because dynpro don't offer suitable api. Map have to show some dat

  • Extension name and version

    Hi, I built an InDesign Extension using Flash Builder 4 and CS Extension Builder libraries. Extension works good, I just want to change its name and version as I see it in the Extension Manager CS5 (under Extension column I see: "com.example.exampleE