With a laptop MAC is it better to leave it on and asleep or do you need to power down or hibernate when not using?
I just got a new MacBook Pro. With my netbook, I was told to hibernate or shut down when I was finished. With my PC I was told to turn off the monitor but leave the computer on because each time you shut down and rebooted you wore down the components. My mother is a photographer and keeps her MAC desktop on all the time, and just moves the mouse to bring the screen back to life. She never turns it off unless going out of town. So, with a MacBook (MAC laptop) should I keep the laptop on all the time and just take it out of sleep when I need it, or should I shut down and re-boot in the morning? Thanks.
it's actually up to you. I leave mine turned on all the time and just close the lid when i'm not using it.
if however, you will not use it for days, it's best to power it off.
not the same was windows laptop where we were always told to turn it off.
again, this is user preference.
Similar Messages
-
How do I turn off the "make a sound" feature with Find My Mac. I think my macbook was stolen and I don't want it to make a sound when it connects. Can turn the feature off somehow?
ica310 wrote:
I've read some forums that say I have to overwrite it with a silent sound file but I do not understand how to do this.
You have to jailbreak your phone to do this, voiding all warranty & support. Just flip the Ring/Silent switch when you send. -
Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!
We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected
-
I have the "Hanvon 5040 drawing tablet",it was working perfectly with mac till last month.As soon as i plug the USB of my tablet into my macbook pro the computer is blocked and an error apears: "you need to restart your computer..."nothing works.Any help?
Check with the manufacturer for updated drivers for your tablet.
-
I have PSE13 on my system, Windows 8.1, 64-bit. It was functioning properly after installation and now I get these messages when I go to print: "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You need to check your printer settings before printing." and then this statement: "Default printer could not be opened." I have reloaded drivers for both printers and made any upgrades possible. It was working fine before and now all of a sudden, nothing. Would prefer to have old PSE v.12 back, it worked with no problems.
See this thread
My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help? -
I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?
Are you connecting your iPhone directly to your PC or to a USB hub?
-
I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?
See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error -
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
-
My ipod touch 5 will not sync with my laptop or even be recgonised even though it is charging when plugged in?
Not knowing what yo actuall tried
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
What to do with Time Capsule when not using for Wireless Internet
I previously connected my Time Capsule to my fiber optic router but in my no home this is no longer needed as the cable TV company now provides 160 MPS Internet in a router that contains a wireless router built in. It works fine. My computer is now connected wirelessly to that router (too far to take advantage of the wired connection).
Therefore I want my Time Capsule to just be connected to the computer for backups. I gather I have to connect it via Lan and make sure it does not transmit r receuve wirelessly. In fact, other wireless computers in the huse occasionally try to log into the old Time Capsule PPoE settings, so I want to erase them and start fresh.
This seems to be similar to what I want t do, but I want to make sure and ask:
https://discussions.apple.com/message/8256674#8256674
If this is not correct, can someone advise.
By the way, I have a first generation Aiport Express that I hope to use with my new cable router (modem?). I assume it will work as it did with the Time Capsule. Purpose is for Airplay with an audio system.
Thanks!Thank you for your replies. I really appreciate it.
To answer your questions in order, but first I should mention that due to work reasons, I will be away from my computer until Friday night Japan time, or Friday AM US time.
Anyway, probably better I go slowly,as I tend to get overwhelmed by technical things.
1) You said: "The TC does NOT require an Internet connection for network connectivity. You DO have to connect the TC by Ethernet to the Fiber Optic router in order for it to gain network connectivity AND to allow network clients to access it."
-->Ok, this is in reference to my Time Capsule and the previous network n myold apartment. But your next question makes me wonder:
2) "Is this Motorola device the one that replaced the Fiber Optic router that you mentioned in your original post? What is its model number? Do you have the TC connected directly to it by Ethernet?"
Ok, this is what I have:
Wall--> Cable modem with wireless (Motorola SURFboard SBG6580J Wireless Cable Modem Gateway.)
Other Room IMAC connected wirelessly to Cable Modem (no Ethenet connection to it since there is no jack and too far to run a cable (permanently--I can do for setup if needed)---> connected to TC and Time Capsule is backing up ok. Time Capsule is also not connected to the Modem
3) "Since you will only want to use the Time Capsule for Time Machine backups, I understood that you wanted to disable its wireless network. If this is still the case, the Express would need to be configured to join the wireless network provided by the Motorola wireless router."
Yes, This is what I am wondering. Do I have to connect it by LAN to the Motorola? A few times, when it was just plugged into the Wall, my Mac airport utility found but them could not connect to my Express. maybe because I did not configure it to work with the Motorola as you say.
4)
"By default the Express will broadcast its own wireless network with a network name of something like: Apple Network NNNNNN. You would need to connect to this network with your computer prior to attempting to access it with the AirPort Utility. Another option would be to temporarily connect it, by Ethernet, to the Motorola router during its setup phase. Once completed you can move it to the desired location."
Ok, this confirms what I guessed. Connecting the computer to the Expressby Lan? Is that what you mean?
I do understand the second option---connecting the Express to the Motorola.
If that is right, I can try that. Do I need to do anything other than connect it?
I will be able to try this Friday or Saturday I hope.
Once again. thanks for all your help. Really appreciate your taking the time to explain it.
paul -
Do i need phantom power for a condenser mic to use with garageband?
i have learned condenser mics need phantom power. if i would hook up a MXL 900 series condenser to my MacBook via an XLR to 1/8" cable, would it work? does garageband have some sort of amplification plug-in? or would i need some sort of mixer or otehr phantom power device for it to work?
MacBook 2.0gHz (White) Mac OS X (10.4.8)condenser mics need phantom power to work at all, it has nothing to do with amplification.
you need an interface or mixer that supplies phantom power, or an external phantom power supply to use your condenser mic. -
Laptop is 7 years old, but previous version (beta) of Firefox was nice and fast.
Laptop is 7 years old, but previous version (beta) of Firefox was nice and fast.
-
How do I turn off the tiny Shuffle-sized iPod Nano (v6 with a touch screen) when not using its iOS?
Hello and happy new year.
I decided to use this used iPod Nano (touch screen) as an eight/8 GB flash disk/storage (FAT32). I can access the files just fine. I can always restore it back to use iOS quickly and easily if needed.
However, it never seems to turn off/sleep. I tried holding down the big button on top right (next to the two volume controls [+ and -]), but it never does anything. Also, it says "OK to disconnect." when disconnected.
So, I restored its iOS v1.2 from an old 15" MacBook Pro (2008; Mac OS X 10.5.8) onto it and can turn off easily. However, I cannot access its drive since it is not a MS FS and Windows XP Pro. SP3 asked me to format. How can I turn it off and still use it as an 8 GB USB flash disk/drive without installing and using iTunes?
Thank you in advance.Hey,
Holding in the play/pause and the menu (select) button will force the iPod into disk mode. This is the stand by mode you are talking about.
To turn your iPod off properly you will want to hold down the play/pause button until the screen goes blank and then turn the hold switch on. This is cause the iPod to go to the Apple screen when it turns back on.
Hope this helps,
Ms D. -
I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report: 6
Anonymous UUID: 70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.4
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 560.7.21
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.0.8
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 5.0.7
com.apple.driver.AppleUSBXHCI 1.0.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.7f2
com.apple.iokit.IOBluetoothFamily 4.0.7f2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.0.7
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
On older versions of Firefox, Toolbar links ran across the top of my screen, with a drop-down to the far right which would show additional Toolbar items for which there was not room on the screen.
With Firefox 4, if I'm not using icons (text only), the dedicated Toolbar drop-down is gone and I have to first click 'Bookmarks' to the right of the Toolbar ribbon, then 'Show All Bookmarks', then 'Toolbar' in order to access my additional Toolbar links. Could anyone have made it any harder?
Why doesn't someone just restore the drop-down at the far right of the Toolbar so that all of my Toolbar items (which I prefer to keep separately from the regular Bookmark items, else I would have just plain bookmarked those items in the first place) are readily accessible?You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You only see the Bookmarks menu button if the Menu bar is hidden.
Maybe you are looking for
-
MyFaces in JDeveloper 10.1.3.0.3 EA1
I was using the JSCookMenu from MyFaces (ver. 1.0.9) in JDeveloper preview addition 10.1.3.0.2 I am now trying to use JSCookMenu from MyFaces (ver. 1.1.0) in JDeveloper 10.1.3.0.3 EA1. The page loads in IE without the menu, status bar says "done, but
-
Easy to produce - Memory Leak in JVM Using thread
I was just debugging the problem with our server and got this error (not from the original code, I reproduced it with small code) at java.lang.Thread.run(Unknown Source) java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thre
-
PALLET PROCESS CONFIGURATION - SAP
Hello Experts, Greeting. I would like to know how can we configure the "Pallet" ini SAP.At the current time we are planning to perform goods receipt for production order at individual pallet (One pallet may have 54 boxes ). A pallet label will be pri
-
I should create a new database link to an AS/400 server but i m rookie!!
İ have an oracle 10g DB server.İ need get some of data from AS/400 DB on other location and put them all to my oracle server.İ should create a database link between oracle server and AS400 DB but how will i realize that event.in oracle 10g enterprise
-
Centering a JComponent inside a JScrollPane
I've got an instance of a subclass of JComponent (DrawCanvas) inside an instance of JScrollPane (scpEasel). scpEasel is itself in an instance of JInternalFrame (ifEasel) that used a GridLayout. When the DrawCanvas object can fit inside the JInternalF