With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?

larryh
Please remind us on what computer operating system your Premiere Elements 13 is running
Using your own music.....
Yes, with important but.....
Details
If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
iTunes: How to convert a song to a different file format - Apple Support
If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
Details
As for Premiere Elements narration clips using the its Narration Tool
1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
sound on numbered audio track clips and soundtrack.
ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
serious audio distortion.
I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
Thank you.
ATR

Similar Messages

Can't add a new audio track without any settings

Can anyone tell me were faced with the same problem. Doing audio post production in Logic Pro X, the latest version, the project is big, At some stage the work I was faced with the fact that you can't add a new audio track without any settings, no matter what inserts I track with duplicate settings of one of the tracks and it begins to sound with this track. I don't add a new audio track with duplicate settings. I add a new one, and I still opens the track with some sort of settings. What is it? This is a glitch or I'm somewhere that we have not considered? Duplicates the configuration of one of the tracks collected in group 1, which I did for editing convenience. Duplicates and also automation and if the new track am I doing something then this machine is transferred to the existing track from this group.

Everything works in full 'Logic Pro X' mode. It's just a glitch in my project. The problem while you decide this: I insert a new track and it reset and set the output.

Can anyone help me write a code about coping data from many files and paste them to one file !?

Hello !
As I said in title , I have alot files (e.g. 60 files) and I want to write a code to copy 5 columns (for examples) of special sheet of files and paste them in one file respectively. For perceive it I explained it more below .
Suppose one of my files is simplified as this : http://s000.tinyupload.com/?file_id=00699705919876414523
The name of this file is 2006Oct and assume my excel files are like "2006Oct, 2006Nov,2006Dec,2007Jan ... 2010Dec". At first I should go to "my files" sheet of 2006Oct file and copy columns " A,B,C,D,E,F " that has "PerturbationNumber=1"
respectively and then paste these to a file that is output file and repeat this process for the other files ( 2006Nov and etc ) and paste data in output file sequentially.
I appreciate and look foreward for any help in this issue.
Majid

Try code below
Sub CombineBooks()
Dim wb As Workbook
Dim sourceSht As Worksheet
Dim destSht As Worksheet
Set destSht = ThisWorkbook.Sheets(1)
destSht.Cells.Clear
FolderName = "C:\temp\test\"
file = Dir(FolderName & "*.xlsx")
firstSht = True
Do While file <> ""
Set wb = Workbooks.Open(Filename:=FolderName & file, ReadOnly:=True)
Set sourceSht = wb.Sheets(1)
With sourceSht
sourceLastRow = .Range("A" & Rows.Count).End(xlUp).Row
If .Cells.AutoFilter Then
.Cells.AutoFilter 'turn off autofilter
End If
.Cells.AutoFilter Field:=6, Criteria1:="1"
If firstSht = True Then
Set copyRange = .Range("A1", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destSht.Range("F1") = "FileName"
firstSht = False
destNewRow = 1
Else
Set copyRange = .Range("A2", .Range("E" & sourceLastRow)).SpecialCells(xlCellTypeVisible)
destNewRow = destSht.Range("A" & Rows.Count).End(xlUp).Row + 1
End If
copyRange.Copy Destination:=destSht.Range("A" & destNewRow)
LastRow = destSht.Range("A" & Rows.Count).End(xlUp).Row
If destNewRow = 1 Then
destSht.Range("F2:F" & LastRow) = file
Else
destSht.Range("F" & destNewRow & ":F" & LastRow) = file
End If
End With
wb.Close savechanges:=False
file = Dir()
Loop
End Sub
jdweng

When syncing Ipod to itunes some of the albums pull music from other albums and place the songs in an album that doesn't relate or of the same artist. I have reloaded the ipod twice with the same affect. Any ideas??

I appreciate any help on this..very frustrating listening to Led Zep album and another groups song is listed in the album. If I look at the album in itunes all albums look perfectly correct.

I feel your pain! I have the same exact problem. Have you gotten a solution yet?

Adobe premier element 9

Hello,
I have a problem with Adobe premier element 9.
I created a project with some photo and in this photo I put a little video to comment it. The project is in 1280*760.
My problem is when I want to record my project in a littler resolution (800*600), all the insert video moves out from the picture.
Do u know if there is an “option” to keep all as it was in 1280*760?
Other information: I tried to record my project in 1280*760, but it don’t work, “undefined error”…. This is an other problem…
Thanks for your help.

For what I am reading, per your desires, I would match the Project's Preset to that of your Video, in every respect.
Scale your still images to match the chosen Frame Size. This ARTICLE will give you tips and more detail.
Now, to get the Video to "come out of the stills," be sure to turn Scale to Frame Size OFF. Then, you will do a PiP (Picture in Picture), with the stills on Video Track 1, and the Video on Video Track 2, above the stills. You will then use the fixed Effect>Motion>Scale and Keyframe the Scale of the Video. You will start with a Scale of 0, so that the Video is not visible, then Keyframe the Scale to what you need, whether PiP (smaller than the stills), or full-frame. If you want the Video to "disappear" back into the still, just reverse the Keyframes.
When done, you can Export/Share to a smaller set of dimensions, with most formats/CODEC's. You will want to keep the Aspect Ratio the same, as with your Project's Preset, so a little math might be required.
If this is not what you want, please correct where I went wrong, and good luck,
Hunt

Trial edition of Adobe Premier Elements

I want to make my video on Adobe Premier Elements 11 but im using the trial version. Everytime i put a picture, in the background, it says "created with adobe premier elements trail version". How do i delete that from my movie?
Please someone help me. I'm desperate.

Welcome to the forum.
As has been stated, as long as the copy of PrE is the "trial," that watermark will appear, and be embedded in any output file.
When you do purchase the program, and plug-in your S/N to convert from trial to full-paid, you can remove that watermark, for subsequent output, but be sure to Delete any Render Files, as mentioned in that FAQ Entry, posted by John T.. That is an important step, and remember, any files output FROM the trial, WILL always have that watermark.
Good luck,
Hunt

When I'm in a call with my friend, I can't add any...

When I'm in a call with my friend, I can't add anymore people.
We have never had any problems before, and he has always been able to join group chats.
When I try to add more ppl to our conversation the call ends, saying he needs to add me to his friends list..
[3:09:09 PM] *** [Myself] added [Person X] ***
[3:09:09 PM] *** [Person X] can't be added until they accept your contact request. ***
Now I know what your gonna say, make sure he is on my contact list, that I've added him, that he's not blocked.. Done all this, we are on eachothers friendslists etc..
Do anybody have any ideas ?
Solved!
Go to Solution.

Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

When you are pulling music from a hard drive and it says music can not be found, is there a way to stop it from doing that every time I play music from my computer? It used to find all music now it only finds 1 song at a time

When pulling music from a harddrive and it say music can not be found, is there a way to stop this from happening every time I play music on my computer? It used to find all music when serching for song but now it only finds 1 at a time. I have over 2000 songs so I can't go through this every time.

1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps!

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels?

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels? I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended. I want my DVD to be HD so I may sell these videos online for my business. I can't sell them the low quality they are burning now. Hopefully you can help me. Thanks.

desalvom
Thank you for your reply.
You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
that will replay through a regular DVD player. But players are marketed under a variety of names with
different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
etc.The bottom line is the specifications for each of the players that are candidates for the playback of
the AVCHD format on DVD disc or the format of interest.
If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
Best results depend on you
a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
you have 1080p source, you (manually) or the project (automatically) set the project preset at
NTSC
DSLR
1080p
DSLR [email protected]
or the PAL counterpart, depending on your region need.
b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
customize it.....if you need customization, then you can export your Timeline to a file...in this example
Publish+Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
Then you would upload that file to YouTube at the YouTube web site.
All of the above are factors that need looking into in order to determine the why for what you wrote
I have published a shortened advertisement video to YouTube- say 5 minutes-
and it is low quality
Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
Thank you. As always, any clarification needed, please do not hesitate to ask.
ATR

Adobe Premier Elements 13 can´t download grafics and title anymore.

Adobe Premier Elements 13 can´t download grafics and titles anymore. Starts downloading very slowly and then PC says "is not connected with the internet" - but it is!

ash.agarwal
Some have been finding it easier to download these older versions 9, 10, 11, or 12 versions of Premiere Elements from the following web site as tryout and then to insert the purchased serial number into them at installation.
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
It is important that you read and carry out carefully the "Note: Very Important Instructions" on the web page in order to avoid an Access
Denied message.
Please review and consider and then let us know the outcome when you have time.
Thank you.
ATR

How can I convert a layer into a smart object with Adobe Photoshop Elements 10?

How can I convert a layer into a smart object with Adobe Photoshop Elements 10?

That feature is only in PS. Elements as you buy it has only limited support for smart objects. If you use File>Place to add something to your image it will come in as a smart object (within the limits to which PSE understands smart layers). However, if you know someone who can write an action for you in PS you can install it in PSE, or you could look into something like elements+ from simplephotoshop.com.

I need to know that Adobe Premier elements 12 will do the following; allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback

I need to know that Adobe Premier elements 12 will do the following; Allow for zooming in of recordings (i,e, can zoom in on items I edit); Can display orgiinal and zoomed recordings side by side; and allow for frame-by-frame playback.
Is this possible?
Any input is appreciated! Thank you.

Tom
Thanks for the reply.
Your thoughts on frame by frame viewing are can do. However, the real time playback feature includes the concept of rendering the Timeline, when the program indicates the need to do so, to get the best possible preview of what you are seeing in the Edit area monitor. That is a major novel in itself. Each time you do a new edit you will get the render indicator message to ignore or act on.
Definitely go the free 30 day tryout route for Premiere Elements 12. I have Premiere Elements 12 (updated to 12.1) and it runs fine on Windows 8.1 64 bit.
Best start with the Premiere Elements 12 Help PDF.
http://helpx.adobe.com/pdf/premiere-elements_reference.pdf
Also please review by blog posts Premiere Elements 12 First Look and Premiere Elements 12 Daily Discovery.
http://www.atr935.blogspot.com/2013/09/premiere-elements-12-first-look-details.html
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
When you get to the point of hand on with a mini test run project, I can offer to work with you through some specific workflow details in post exchanges in your thread(s). And we can sort out the can and cannot do.
ATR

Converting iMovie format to a format that I can edit with Adobe Premier Pro

How can I convert iMovie format to a format that I can edit with Adobe Premier pro 7 program?

Install the free flip4mac player and you'll be able to view it.

Can anyone help me print a phot pacage with Adobe Photshop Elements 8?

I am trying to print a picture package with Adobe Photshop Elements 8. The package size is letter (1)5x7 (4) 2.5x3. When I press print, the package is sent to my printer (an HP Photosmart Premium), but it never prints.
My computer shows it is "printing", but it just remains stuck in the que. I cannot even delete or cancel the jammed print job without shutting off the printer, closing the program, and rebooting my computer.
I can print individual pictures with Adobe Photoshop 8 and I can print other pictures and documents from other applications on my computer. So my computer and printer seem to be communicating and functioning correctly except during the use of APE 8.
The problem seems to be a gliche in the adobe program which does not allow me to print photo packages. Does anyone know how to fix this?

Though I can't tell you how to fix your problem, you can use a work-around to print your picture photo.
You can easily save your picture package as a pdf file which you can print at your convience.
install any print-to-pdf application.The application would register itself as a printer and whenever sent a page to print, would convert and save it as a pdf
prepare your picture package and print it using the print-to-pdf application
load the saved pdf file and print it
Adobe has its own print-to-pdf application too. http://www.adobe.com/products/acrobat/print-to-pdf.html

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

Similar Messages

Maybe you are looking for