With Aero feature no longer in Windows, what third party apps exist for Powershell Tabs/Transparent
Hello,
I am looking for ways to make the windows PowerShell console support tabs and being transparent. As Microsoft has removed the Aero feature from Windows you can no longer make a window transparent. I know a few applications exist on the market for PowerShell
but would like to know if any are recommended for the features I am looking for?
Thank you,
Joseph
From the windows 8 section of the link you sent
" the Glass theme was ultimately removed, as Microsoft designers wanted to avoid skeuomorphism. The desktop interface on the final release of Windows 8 was modified to incorporate elements of the Metro design language; in comparison to Windows
7, the interface adopted a flatter look with almost no transparency effects, fewer rounded edges, and solid colored window borders designed to attract more attention to the content of a window
Everything I have read says that this has been removed. That aside. I am aware that PowerShell is a Console. I would like that Console to be transparent and support tabs so that when I am working I can utilize the ability to see work that shares the same
screen space as my PS console. This is not a required feature by any means, it is just something I would like for when I am working with multiple PS consoles and multiple applications that I may be pulling or outputting data to.
Again I am aware there are several third party applications that will allow me to achieve this but I am skeptical about using them and wanted to see if there was any feedback I could get in regards to using one of them.
I hope this better explains what I am asking. If not its not a huge deal as this does not stop me from doing any of my normal work. I just remember being able to have transparent terminals in Linux but as I do not work with Linux anymore, I am S.O.L.
Thanks
Joseph
Similar Messages
-
Can iPhone be infected with a virus while accessing websites through a third party app?
Hi there all, while accessing a newly found video website via a third party app on my iPhone 5, a window suddenly appears saying "your iPhone has been infected by a virus" and then gave a link to click "to prevent further damage from happening." I chose to ignore the message since it's always been my understanding that iPhones are relatively impervious to viruses, however, since the pop up was now preventing me from doing anything else with the app, I just closed out the application entirely then rebooted the phone (just to be safe) and it's been working fine ever since. I suspect this pop up was a fear based ploy intended to scare me into clicking the link being provided. Am I correct, or is it actually possible for a virus to infect an iPhone just by going to an unscrupulous website without even downloading a file? I haven't opened or done anything with this third party app ever since. btw, my iPhone 5 is running iOS v8.1.2 and I've never had any issues with it in the past. If anybody can answer it would surely be appreciated, many thanks!
Several years ago, my oldest brother was stupid enough to let himself be duped into being a major participant in a personal situation having a direct impact upon me. Prior to the rift that developed which ultimately tore our relationship apart, I suggested we meet for lunch one day as all I was wanting was for him to be honest with me. Feeling guilty and hating all confrontation, he just had to get out of there, and so instead of answering my question he jumped up and shouted "YOU'RE ALWAYS DOING THAT TO ME!!" right in front of everyone at the restaurant. As a tension breaker I shouted right back, "didn't YOU ever learn the word ALWAYS should NEVER be said during an argument?" And so yes, you're right, I should have qualified my question more by saying "relatively impervious" instead. MY BAD!! I still want to say "THANKS" anyway for providing such a quick and accurate answer!
-
Our admin crew has just inherited a 4 year old SharePoint site that was developed on SP 2007 and later migrated to SP 2010. We are trying to determine which users and groups have access to the 150+ sub-sites of the site and at what permission levels.
Research tells me SharePoint 2010 has no means to simply list out a user's permission levels over an entire site collection, but that it must be done at each sub-site, list & library that has permission inheritance broken to create a unique permissions
object.
Has anyone found a solution to this issue? Without days of research at each sub-site, list & library, how would one more economically go about such an investigation of a user's permissions on an entire SharePoint 2010 site?Hello,
There is no direct way to see user and group broken permission within a site collection. However you can write powershell script to get the permission. You can modify the below script based on your need and export result in CSV. You may also need to add
code to iterate all subsites within site collection.
http://social.technet.microsoft.com/wiki/contents/articles/14242.sharepoint-2010-export-all-unique-permissions-from-site-collection-using-powershell.aspx
http://en.community.dell.com/techcenter/windows-management/b/weblog/archive/2012/09/25/sharepoint-security-reporting-using-powershell
Codeplex tool is also available to check permission but it is not always fulfill business need. You may also look at this if it suits you.
https://permissionsmanager.codeplex.com/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Problems with enhancers, haxies, other third party apps?
Many posts in Apple Discussions have blamed haxies and various third party apps for many opperational problems. I found the Dock so irritating (and the Launcher) that I primarily used OS 9 until 3 haxies were released with the classical drop down Apple Menu. I installed FruitMenu, Xounds and Application Enhancer November 11 2002 on 2 computers. I also have 3 GUI's installed. I have installed every OSX update and have had no problem of any type with computer operations. With each OSX update you should update your third party apps when required.
Stick with Brand name RAM and reputable distributors. Mac is finicky about low quality RAM
Try OWC http://www.macsales.com/
Crucial http://www.crucial.com/
Most RAM comes with Lifetime guarenntee so return it where you got it. -
With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.
Where did you come up with the $700 figure?
Photography plan - $9.99/month or $119/year - Creative Cloud Photography plan : Adobe Creative Cloud
Single App - $19.99/month
Complete plan - $49.99/month or $599/yr - Creative Cloud free trial & plans : Adobe Creative Cloud
Ah - If you wish to cancel early yeah $74.99 which would total for the year at $899.88. But that final total would be if you canceled in the 12th month but if you plan on keeping it that long might as well go for the annual contract. Then cancel at the end of the term limit if you need to.
If you are not sure what to get, Either Elements as was suggested by Peru Bob or the photography plan. -
CMD Tab feature no longer takes me to the selected app.
The CMD Tab feature no longer takes me to the selected app. Additionally I have to double click many apps in the Dock to gain access. Anyone have a solution for this?
I have installed a clean Mt Lion system in th ehope that it would fix this but no luck.tinafromwest lafayette wrote:
but when I use the down arrow key to "launch" the app back open; I get a small icon at the bottom just above the dock.
Don't use the down arrow key. Simply release the Command and Tab keys once the application you want is highlighted. This will open the application in a normal view.
By pressing the down arrow key you are invoking the view all open windows for an application. This is the same outcome as using Control and down arrow for an application that has multiple windows open. -
Third party apps no longer work with bus transportation! HELP!
I understand Apple no longer supports bus transportation (lame) but third party apps, such as SEAtac, OneBusAway, or anything else just gives me a 'no routes available' page. I can't find any routes on my desktop either. Is this happening to anyone else?!
Does anyone know a) how to fix this or b) how to downgrade back to the 7.1 operating system?a) you would probably need to contact the app developer about their app, and I would know nothing about your desktop. b) Apple does not support downgrading of iOS. It cannot be done.
-
What Third Party Software to Modify Time Machine Backup Schedule?
Hello -
I was hoping to get some suggestions to what third party tool to use that will allow me to change the timing of backups from the regular hour intervals. As far as I know that cannot be changed in Time Machine and am looking for suggestions of software that will allow me to modify the schedule.
Thanks in advance...Katie 'OConnell wrote:
This may be so, but Time Machine DOES say that it will continue backing up files until the hard disk is FULL. That could be a problem if one doesn't have a massive HD that can be dedicated exclusively to this activity, nor tons of money to purchase extra HDs so that Time Machine can back up to its heart's content.
Frankly, I don't need hourly backups and would prefer to eliminate those altogether.
The hourly backups don't really add much space, since they're only kept for a day, but they do protect you better. If you back up less frequently, you can lose more when (not if) your internal HD fails, or something else awful happens to your Mac.
And there's a much better chance of recovering a previous version of a file that you change or delete in error (ever do "Save" instead of "Save As"?), or that somehow gets corrupted.
As noted on the Time Machine Preference window, after 24 hours, it keeps one backup per day (the first) for a month, then one per week as long as there's enough space. After that, it automatically deletes the oldest backup(s) to make room for new ones.
It varies widely, of course, depending on how you use your Mac, but Time Machine usually needs 2-3 times the space of the data it's backing-up to keep several months, or more, of backups.
By the way, if you're mixing other data with your backups, in the same partition, that's going to be a problem sooner or later, but it's easily avoided by partitioning it. See #3 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Message was edited by: Pondini -
Many Third Party Apps crash when interacting with Finder
Hi everyone,
I am having a bit of an issue with OS X Mavericks v10.9.4.
Lately, whenever I try to do any 'Finder interactions' (Open, Save, etc) with third-party apps like Google Chrome, Brackets, and Photoshop*, it instantly shuts the program down, showing me a Problem Report, which doesn't really help me out, because I can't really understand it.
*Replicating the error is easy on both Google Chrome and Brackets, but not on Photoshop.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.
Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset. -
Hi All
I have run into problems with my iPhone 4. I hadn't done an update for a while so decided to get my itunes and iphone 4 up to date. I downloaded all the latest versions. However now non of my third party apps work and my largest one has vanished. I try and open them and they flash up and then close again. I thought the easiest thing to do was to restore so I tried to syn my apps onto itunes so I wouldn't loose them. However it won't let me sync the apps onto iTunes. It ill allow me to syn the old version when I just started but since then I have bought a dozen other apps. Can anyone help. thanksWell this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way. -
I used my only Apple ID to purchase my iMac (Intel-based one). I've never been able to update core apps that came with it. I can update third party apps I've bought (like Coda), but when I try to update Garage Band, iPhoto, iMovie and so on, a popup message appears saying "You have updates available for other accounts" and "Log in with the account you used to purchase this app in order to update it", or similar (see screenshot above).
The OS seems to get its updates fine - it's just the core apps from the App Store.
I've only ever had one Apple ID, so I have no idea what to do. I went to ask the Genius bar at my local Apple store, and they couldn't help, and insisted that I must have purchased the iMac using a different account, but I definitely didn't. There are a few posts on non-Apple forums of this happening to other people, so it must be a rare bug.
I'm a little concerned it may affect my ability to update from Lion to Mountian Lion. Can anyone help?
DanHave you done a Disk Repair and a Disk Permissions Repair?
If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists. -
Formatting music from windows to a mac using third party app
i used a third party app so that i could download music from a pc onto my os x formatted ipod. initially it worked when i moved the music into my itunes library on my mac, but for some reason now a lot of the tracks won't play and my computer freezes if i press play on any track that originally was downloaded onto a pc. is there a way to identify where the songs came from and then delete then from the library without going through each one a seeing if it will play and then having to force quit itunes because it freezes?
From what I know, windows will not recognize the complicated data of a mac formatted device; hence not recognizing it. Macs can recognize a windows formated ipod though, so if you decide to reformat it on windows, then you can use it on both computers. If you dont though, looks like you are out of luck, sorry.
Hope I helped. -
SAP R/3 integration with (Manual) Third-party App
Hi All
I am working on a scenario in which Third Party application has functionality which actually refines & correct the data upto the accuracy of 99%. So for this end-user needs to enter bit of information on their front-end then application will return the data on the basis of that information.
Now the problem has different parts -->
*) If I choose that SAP R/3 will initiate the ( Synchronous ) process then ABAPers raised the concern that they will not be able to display the response data on correct SAP screen also how to actually access the front-end of Third party.
Third-Party is ready to replace the Front-end with the web-service but then end-user will not be having the functionlity to select different options which is the strong part of Third-party application & also client is not agree to that.
Do you think I should use BPM in above solution with correlation on some field to identify the SAP screen.
*) If I choose Third Party application to initiate the ( Asynchronous ) process then again ABAPers raised the concern that how to display it on the correct SAP screen & how they know that data is coming at this point of time & they need to display it. Also Third Party said in this case they don't have expertise to customize their Front-end application & which will lead to additional cost to hire other developers.
Now can you suggest some good solutions for this kind of scenario in which an application needs the Manual intervention & needs to be integrated with SAP R/3. Also suggest from which direction I should initiate the process.
Thanks
- Lalit Chaudhary -Matias
<<<< with front-end do you refer to SAP R/3 ?
No Matias with Front-End I meant Third Party is providing the web-page where end-user can enter the details & those will be refined & corrected by the Third-Party Application.
<<<<< Which ways has the Third-Party app to connect with (file, database, jms, etc.).
Third-Party App is providing Java Classes & Web-Services for integration but we don't want to access them directly, first of all we would like to invoke/access the Front-end application.
<<<< What is the purpose of this third-party app ? just to receive data, validate it and return it once it is corrected ?
Actually in this Front-end user can enter the data on given fields & data will be keep on refining while he is entering the more information into that given field. For e.g if the field says "City" & user enters "DE", a drop-down will come with all the cities in the world starting with "DE" like Delhi, Denmark etc.Once all the fields are populated with correct data user will click on "Submit" button which will send the data to SAP R/3 ( which we wish to do ).
Now in this case when user will click on Submit button ( means Third-party will initiate the process ) & data will be send to XI using ( for e.g ) HTTP sender then ABAPer's raised concern that how they will be able to show it in the right screen without using proper thread ID.
Pls. let me know in case you require any further information. My problem is this how to relate the Third-Party data with correct screen of SAP.
Thanks
- lalit - -
What are the third party tools available for Encryption in Oracle database?
Dear All,
Can you please help me with the below question?
What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost informationWhy would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
1. Operating system
2. Database edition and version
3. What type of data needs to be secured
4. What level of security is required
Maybe you are looking for
-
Running CC and importing some 2500 items to be rendered and aerendercore stalls
System: Apple MP6,1 12-core, 1TB SSD, 64GB RAM, dual D700s. This seems to happen now and then. It's not consistent, but when it happens it is obviously annoying. Up to the point where aerendercore is running flat out it's using all 24 threads on my M
-
Adobe CS4 under windows 8.1 64 bit?
I've got problems to install my Adobe CS4 under windows 81. 64 bit. It use to run under windows vista 32 bit. Does there any update or plugin exist tio fix this problem?
-
I am trying to install CS 5.5 on a different pc, but I am receiving an "invalid serial number "
I am trying to install CS 5 on a a diffent pc, than it was originally installed on, but I receive a "invalid serial number" error message, even though it is a vaild serial number.
-
Universal Worklist loading time
Hi All, I have setup the UWL in the SAP Portal and I have limited the DefaulView to only show to type of items. But the UWL is taking about 1 minute to load a list of 30 items ... Is there a way to improve the performance of this application? Thank a
-
A friend installed Mozilla Firefox for me about 3 months ago to replace Kaspersky which always slowed my computer responses. Now Firefox is slow at responding to looking for my e-mail, at searching for info, and often the message"NOT RESPONDING" foll