With Drummer - how do I arrange different rhythms to match the different phases of my song?

Essentially I want to to be able to have different drum phrases for intro, fill, verse, chorus, etc.
Whilst I understand how to create these phrases one at the time with drummer, I am not sure how to arrange them together, one afte the other, to form a complete arrangement for a given song? Example: Using Kyle, I want hime to start the song with a simple intro with the kick, then start adding some snare, then go into a fill with the toms and then return to a normal rhythm before ending with just cymbals... How do I programme that?
I thought I could do that by using various tracks of the same drumemer, but Garageband is telling me that I have already chosen a drumemr and I cannot have another drummer track. I want to avoid dragging loops in, becasue they would have a differnet sound / feel to the drummer type I've chosen and would make the project sound unorganic.
Any help on this would be appreciated
Thanks

You can have only one drummer track, but the regions in the track can have different settings.
When you ctrl-click inside the drum track it will add a new region with eight bars.
For each region you can change the parameters in the track editor:
drag the yellow dot around between soft and loud, or simple and complex.
Or select a different preset in the left column.

Similar Messages

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit

What do you mean a moderator

How do I connect different secttions of a song together?

How do I connect different secttions of a song together?

dougbittel wrote:
I currently have 6 sections of the song. What happens is that I hit play and it plays only section A over and over again.
you didn't mention you're using the iPad version...
http://www.bulletsandbones.com/GB/GBFAQ.html#playallsectiongbi
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I get my printer to match the colours of the image as I see it on screen?

How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen

You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo

When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.

Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

How to form a regular expression for matching the xml tag?

hi i wanted to find the and match the xml tag for that i required to write the regex.
for exmple i have a string[] str={"<data>abc</data>"};
i want this string has to be splitted like this <data>, abc and </data>. so that i can read the splitted string value.
the above is for a small excercise but the tagname and value can be of combination of chars/digits/spl symbols like wise.
so please help me to write the regular expression for the above requirement

your suggestion is most appreciable if u can give the startup like how to do this. which parser is to be used and stuff like that

JSpinner with SpinnerDateModel - how to set a different Locale?

I wonder, how I can get my JSpinner to display dates in some different Locale.
I tried UIManager.getDefaults().setDefaultLocale(...) and spinner.setLocale(...) and ((JSpinner.DateEditor)spinner.getEditor()).setLocale(...) and ((JSpinner.DateEditor)spinner.getEditor()).getTextField.setLocale(...) but without any effect.
??? "Lost in Swing" ???

     * Set the same DateEditor properties
     * for each spinner.
     * @param dateEditor
     * @param pattern
     public void setFormattedDateEditorTextField(JSpinner.DateEditor dateEditor, String pattern) {
          JFormattedTextField jFormattedTextField = dateEditor.getTextField();
     jFormattedTextField.setEditable(false);
          jFormattedTextField.setPreferredSize(new Dimension(130, 15));
          jFormattedTextField.setHorizontalAlignment(JFormattedTextField.RIGHT);
          //setFontSyleProperties((Component)jFormattedTextField);
          jFormattedTextField.setLocale(getSpecifiedLocale());
          DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.DEFAULT, getSpecifiedLocale());
          ((SimpleDateFormat)dateFormat).applyPattern(pattern);
          ((DateFormatter)jFormattedTextField.getFormatter()).setFormat(dateFormat);
          jFormattedTextField.getFormatterFactory().getFormatter(jFormattedTextField).install(jFormattedTextField);
     }

Weblogic 12g Server - EAR with WAR - how can I have different XML parsers

Hi All,
I have a requirement where I need to have two different XML parsers in the same enterprise application.
By backend Spring container require a XML parser and my JSP code which has XSLT logic require another XML parser.
If I specify -D System property then it is applied to the whole Enterprise application. Instead I want a way to specify different XML parsers one for Spring backend container and the other for JSP pages.
I am deploying my application in Weblogic and it is an EAR file.
Thanks in Advance,
Kishore Veleti A.V.K.

check this one.
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl

If you have logged in on an iPad with iTunes how do you keep your iPhone separate to the iPad

How do you separate your iPad and iPhone ?

Each device should have a unique name and iTunes can tell them apart.

How to get a flv file to match the quality of a quicktime file?

- here's a 400kbps flash video
http://gelconference.com/mov/cc-flash-400kbps.html
- here's the same footage at a *lower* bitrate, 391kbps, in
quicktime
http://gelconference.com/mov/cc.mov
- QUESTION: why is the quicktime so much better-looking than
the flash?
what settings should i be using in flash to convert a dv file
to an flv file?
i prefer to show the footage in a flash player because it is
cross platform.
i appreciate any advice anyone has!

Just thought i'd let you know, your links are broken so its
hard to give you any advice. Depending on the pixel size of the
movie, your data rate might be too low. The bigger pixel size of
the file the higher data rate is needed to keep details clear and
pixelation down.
A good middle of the road data rate i've found is around
1500kbps. If you are hosting the file, just make sure to set the
buffer time to 3-4 seconds, to allow the users internet connection
to keep ahead.

How can i arrange circles in a space with minimum given spacing?

with illustrator how can i arrange circular object in a space?
look at the image i've done (with paint lol)
say for example that i have 12 of 3 different sized circle and i want it auto-arranged in a square but with a space in between of 1 mm, how can i do that?
[IMG]http://img543.imageshack.us/img543/6379/circles.png[/IMG][/URL]

see here: http://forums.adobe.com/thread/732621?decorator=print&displayFullThread=true

I recenlty forgot my phone password to my iphone 4 and i dont have an computer to sync it up with. How can I not do it without an computer?

When i did the updated that just came out the i07.3 when it told me i wanted a password i just hit next and i never had a password or anything on this phone. i dont have a computer so i can sync it up with. How do you restore my iphone4 without using the computer. HELP

It should still work as an iPod, how is it disabled?

New to using Firefox with MAC: How does one save a single jpeg image from the web (as in a right click on a pc?)

New to using Firefox with MAC: How does one save a single jpeg from the internet, similar to using the right mouse click on a pc?

If your question comes about because you have a single button mouse, it's time to visit your local computer store and get a ''real'' mouse for that MAC. I don't "get" Apple, they sell their hardware for almost twice what a comparable PC would sell for - and then they leave out what is probably the most important time saving control, the right-button.
See this for setting the hidden pref for context menus in Firefox, for Mac's.
http://kb.mozillazine.org/Ui.click_hold_context_menus
type '''about:config''' in the URL bar and hit Enter
Pref Name = '''ui.click_hold_context_menus'''
Double-click to Toggle to '''True'''

After restoring my ipod itunes crashes when veryfing restore with apple how can i skip this part?

Trying to restore my ipod touch 4th gen and after it extracts software itunes crashes when it trys to verify restoration with apple how can i cancel this last part

Try deleing the download file and try again. It is located here:
IPSW file location for Mac and Windows
I would also disable the computer's antivirus and firewall during the download and update/restore.

How do I get a track from iTunes to match the master tempo of my project?

I have a project open and I am adding a track from iTunes, but it does not line up with the tempo, making it impossible to play loops over it. Is there a way to make the tempo of the track match the master tempo of the project?

benfrommason wrote:
so is there a way to mix songs together that aren't the same tempo?
Yes. You have to decide which song is the "master" song that you match the other to. This song has to have the "follow tempo and pitch" option unchecked, the other song has it checked. Then you can use the tempo slider to match the songs to each other.
(I even did it with "Sympathy for the Devil" which has an irregular beat - it gets faster as the song progresses, the folks didn't record with a metronome back then. Using a tempo curve, I was able to match it to a modern, steady-beat song.)

With Drummer - how do I arrange different rhythms to match the different phases of my song?

Similar Messages

Maybe you are looking for