With FF 10, when accessing fields: no cursor appears, cannot select text, no visual indication that you have accessed a field.
When clicking in a field to enter text (as in this text box), no visual indicator appears (i.e., blinking cursor) to let you know that you have accessed the field. In addition, when selecting text in the field, there is no indicator that you have selected text (not highlighted). The only way to know is to start typing or to try and cut the text or paste text. It is not intuitive at all.
You may be experiencing this bug that will be fixed in Firefox 10.0.1, possibly released later this week.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=718939 bug 718939] - Java applet causes text entry fields to become semi-unresponsive
Similar Messages
-
I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks
"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath MaliHi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
When downloading iTunes 11.0.3 I get an error 'Error writing to file C:\Config.Msi\1c6fd5.rbf. Verify that you have access to this directory' what do I do?
Appreciate any help thanks,
WillHi WillHunt112,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy -
In trying to download itunes 11, I keep getting the message, verfiy that you have access to parental advisory. When I click yes it continually re tries but doesn`t load. Any ideas ???
Actual message
Error writing to file;C:\programs files(x86)\itunes.resourses\da.lproj\parentaladvisory.png. Verfiy that you have access to that directory.Sorry I can't help but I do get the same error. Previous versions of iTunes on Win XP machine ran fine. I have uninstalled, rebooted, and tried a new install but still get the same error. I can access the directory via Windows Explorer so not sure why the error says it can't access the directory.
-
I was trying to download iTunes on my computer, and while doing so, I got this message: Error writing to file: C:/Program Files (x86)/Common Files/Apple/Apple Application Support/Apple Versions.dll. Verify that you have access to that directory. I have downloaded iTunes numerous times and I have never had this problem. If anyone knows what's going on, I would really appreciate the help.
Well, there's definitely a mac and a Windows version. And you're at the right page. I think the problem is that someone forgot (or decided not to) to update the text at teh bottom of the page to have Mac and Windows.
Just push the button, you'll get the Mac update no problem.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe -
has anyone else gotten this type of message? Just got an ipad and realized our itunes is not working. I think when the most recent version was being installed, it got interrupted.
ThanksI am getting an error writing to file: C:\Program Files\iTunes\iTunes Resouirces\pl.lproj\AppletVStream.nib\objects.xib. Verify that you have Access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
ITunesAdmin.dll error message - verify that you have access
iTunes froze, so I uninstalled iTunes. Have made repeated attempts to download new version from iTunes website, but repeatedly get this message "Error writing to file c:\Program Files\iTunes\iTunesAdmin.dll. Verify that you have access to that directory."
I have admin authority on this machine. What do I need to do to verify that I have access to this directory and/or give myself the necessary access since I seem not to have it? I can see that the file there on my hard drive.
I have rebooted the machine and tried several different things, but keep getting the same error when I try to install iTunes. Have wasted at least six hours on this. Hope someone wiser out there can get us un-stuck.Hello Skeandhu,
Thank you for the details of the issue you are experiencing with updating iTunes. You may want try downloading the latest iTunes update directly from the Apple site. When you are installing it, be sure you are logged in as an administrator:
iTunes - Download
http://www.apple.com/itunes/download/
If you continue to see the same error, I recommend the steps in the following article:
"Bonjour service failed to start, verify you have sufficient privileges" error message when installing
http://support.apple.com/kb/TS1609
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Operating unit access is not allowed.check that you have access to OU
Hello,
I am working on supplier conversion. 11i to R12 (Linux). Old DB is 9i and new is 11g. I am getting the below error when i am trying to upload supplier site
msg count2
Status E
Vendor site id
Party site id
Location id
return_status: E
l_msg_data:Operating unit access is not allowed. Please check that you have access to the operating unit: XXLABS Operating Unit, 100
l_msg_data:Operating Unit Info is null
we created a new org 100 and i am trying to create supplier sites in that ORG. We created a site to the supplier from front end but when i try from the back end i get this error. Below is the code
DECLARE
l_vendor_site_rec ap_vendor_pub_pkg.r_vendor_site_rec_type;
l_return_status VARCHAR2(10);
l_msg_count NUMBER;
l_msg_data VARCHAR2(1000);
l_vendor_site_id NUMBER;
l_party_site_id NUMBER;
l_location_id NUMBER;
l_msg_index_out NUMBER;
BEGIN
mo_global.set_policy_context('S',100);
SELECT vendor_id
INTO l_vendor_site_rec.vendor_id
FROM pos_po_vendors_v
WHERE vendor_ID = 3101;
l_vendor_site_rec.vendor_site_code := 'WOBURN_test';
l_vendor_site_rec.address_line1 := 'XX WEST PARK';
l_vendor_site_rec.city := 'WOBURN';
l_vendor_site_rec.state := 'MA';
l_vendor_site_rec.country := 'US';
l_vendor_site_rec.zip := '01801';
l_vendor_site_rec.org_id := 100;
pos_vendor_pub_pkg.create_vendor_site(
p_vendor_site_rec => l_vendor_site_rec,
x_return_status => l_return_status,
x_msg_count => l_msg_count,
x_msg_data => l_msg_data,
x_vendor_site_id => l_vendor_site_id,
x_party_site_id => l_party_site_id,
x_location_id => l_location_id);
COMMIT;
DBMS_OUTPUT.PUT_LINE ('msg count'||l_msg_count);
DBMS_OUTPUT.PUT_LINE ('Status '||l_return_status);
DBMS_OUTPUT.PUT_LINE ('Vendor site id '||l_vendor_site_id);
DBMS_OUTPUT.PUT_LINE ('Party site id '||l_party_site_id);
DBMS_OUTPUT.PUT_LINE ('Location id '||l_location_id);
dbms_output.put_line('return_status: '||l_return_status);
IF (l_return_status <> 'S') THEN
IF (l_msg_count > 0) THEN
FOR i IN 1..l_msg_count
LOOP
fnd_msg_pub.get
(p_msg_index => i,
p_data => l_msg_data,
p_encoded => 'F',
p_msg_index_out => l_msg_index_out
fnd_message.set_encoded(l_msg_data);
dbms_output.put_line('l_msg_data:'|| l_msg_data);
END LOOP;
end if;
END IF;
END;
Any ideas????I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
I was deleting files trying to make space on my hard drive
What were you deleting?
and noticed as I was deleting files more data was being added to the iPhoto Library.
Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
I would really like to keep these pictures.
Make a back up now.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I keep getting this error when trying to update iTunes: "Error writing to file: C:\config.msi\3a3043.rbf. Verify that you have access to that directory." iTunes will not work. Any time I try to apply settings iTunes locks up. Anyone know how to fix this?
I had this exact same problem just now, trying to upgrade to 10.7.
I even got that error msg when trying to UNINSTALL iTunes!
After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
Then you can install iTunes from scratch.
Good luck -
Hi
My system is running Win 7 Professional 32 bit with 4gig RAM
I am experiencing a problem installing a piece of software - Laplink PC Mover - I need to migrate to my new machine.
The installer starts and the grinds to a halt with the error message:
"Error 1310. Error writing to file: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Laplink PCMover Professional\Visit Laplink.com.url. Verify that you have access to that directory"
I understand from Laplink Tech Support that this is a generic Windows Installer problem, and searching the web it seems to crop up a lot.
I have done a lot of searching, including this site.
I have tried the solutions I have found so far:
Run as Administrator [my user profile has administrator rights but I tried that anyway]
Run from the Administrator user account
Install in Safe Mode - Windows tells me the installer is not available in safe mode!!!
Un-registering and re-registering the installer via msiexec
Using the SubInACL tool to repair file and registry permissions
After all of this, I get the same result - the installer halts with the same message.
Can anybody help? I am desperate to avoid two days solid re-installing all my expensive software, finding product keys etc.Hi,
You can test in Clean Boot mode to avoid the software conflicts, in experience, some anti-virus program would lead this corruption.
Alex Zhao
TechNet Community Support -
itunes error writing to file: C\Config.Msi\165996.rbf verify that you have access to that directory
That's the error I get when trying to uninstall or reinstall my itunes. The application no longer works and I just purchased a new Ipod touch 4th generation that requires I uninstall and upgrade to 10.6.I had this exact same problem just now, trying to upgrade to 10.7.
I even got that error msg when trying to UNINSTALL iTunes!
After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Then you can install iTunes from scratch.
Good luck
Maybe you are looking for
-
Snow Leopard Installer does not recognize Hard drive in disk utility.
I first at the suggestion of apple technicians because of other problems erased and partitioned hard drive. Now when I go to reinstall Snow Leopard it does not recognize the Macintosh Hard Drive, not even in disk utility. Any help will be greatly app
-
MultiChar overflow in 11g UTF8
Hello, I'm getting following error when trying to load an xml file into my 11g UTF8 database: INSERT INTO table1 (ID, XML_DOC) VALUES (1, xmltype(bfilename('ORACLEDIR', 'data.xml'),nls_charset_id('AL32UTF8'))); The error: ERROR at line 1: ORA-31011:
-
Re: Problems while implementing video chat using JMF.
I googled for "Java jmf alternatives" but i didn't get that much :(, can any body help me in JMF so i can make my basic peer to peer video chat as given at very first post. I am exploring this API. Please help
-
I am getting too many Force Quit/SBOD responses for too long. Why? What can I do to fix it? I have been through trash cache, repair permissions, verify disk and trash Safari cache. Can I avoid reinstall system?
-
FlatFile activesync is missing
Hi I need to use flatfile activesync but Flatfile activesync item is missing in the Managed resources table under Configure tab.I dont know what is the problem,Can any one suggest how can I get that.?