With finger print recognition iPhone 5s restart

When I unlock my iPhone 5s, using finger print recognition, it restart.
Is there anybody else experiencing this problem or has solution for it?

Hi and thanks for the tip. I tried it and now just let see if it doesn't happen again.
I let you know.
Thanks again.

Similar Messages

  • Finger print recognition stops working after a few uses with IOS 8

    Why does my finger print recognition stop working on my IP6 and IOS 8.1.2 after a few uses. I re-enter finger prints and it stops working again after a few uses.

    No one here would know.  What troubleshooting steps have you taken so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • About communication with finger print readers

    hi all,
    i am trying to communicate with finger print reader using swing and griaule api .
    Its not responding. Can i know which api exaxtly i have to use for that.

    Hi!
    Search "biometrical" at oracle.com.

  • New HH3 - Issues with Kodak Printer and iPhone 3GS

    Hello,
    Here is the background:
    Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
    Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
    iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
    Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
    You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
    Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
    I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
    Thanks,
    Martyn...

    For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
    I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
    I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
    Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
    1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
    2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)...  this was a nightmare
    3) if you have many devices connected, HH3 doesn't  seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
    So here's what I did:
    1) I ditched the HH3
    2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
    3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
    4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
    Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
    I hope this helps, good luck
    (note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase)

  • Blue screen after keying in passcode or applying finger print on iphone 5S

    Hello all ,
    hope anyone can help cause it is annoying ..
    i have got a new iphone 5s and out f the blue yesterday it restarted on it's own , suddenly every time i try to key in my passcode or apply my finger print it unlocks to a blue screen and restarts .
    phone keeps on doing that endlessly .. is there any way i can restore it since i am unable to log in to the phone at all or get to the settings to apply a reset ..

    You could try a reset, this doesn't wipe your phone. Follow the instructions on this link.
    Turn your iOS device off and on (restart) and reset

  • My Norton 360 won't work with V4.0, I refuse to use it without anti virus, short of going back to IE, How does this get fixed! All my secured logg in pass words are gone as well as finger print recognition...... I think V4 SUCKS!!!!!! I don't want it!

    Theres no security that "I" want to control that will work with version 4! And why would I want to have to cross over all my book marked pages to get to my open pages??? What idiot thought of that? Or does FF intententionally want you to click your book marks and not have your own protection so they can start tracking you and selling info like Google???? No thanks Mozilla, You blew it with this upgrade.... Back to IE

    See [http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-product-compatibility-with-Firefox-Updates/m-p/443808 Norton product compatibility with Firefox Updates]

  • Cant unlock with finger print scanner and alternate password is not working...only have a few tries left before it resets to factory...help please???

    Is there a default password???

    If you activated Android Device Manager on your phone and associated it with your Google account, you may be able to use Android Device Manager to unlock your phone. 

  • Finger print recognition software not detected error message

    My HP Pavilion dv7 laptop/notebook does not detect fingerprint reader software when booted or powered up. Light on bottom right and just under keyboard where usually is amber color is not lit up for swiping my fprint to get into my computer. I don't recall my manual password because been swiping fprint for so long. I can't reset pword and don't recall user name. Don't know if Microsoft software or security updates had any bearing on fprint reader not being detected or not...or if updates installed corrupted files bc of bad code. It won't even allow me to register a new user on the laptop. Pls help. Don't want to have to buy new PC laptop. Have been loyal HP product owner til this issue.

    Hello @KingdomPearl, 
    Welcome to the HP Support Forums.  Sorry to hear about your sign in issue, we have ll been there in one way or another.  I am going to give you a link from microsoft that may help in recovering your password. 
    Forgotten password and other sign-in problems.
    I hope that link helps.   If not could you post back some information about your notebook.  What I am looking for is the product number and the Operating System.  Here are a couple links to assist you in finding this information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Now the worse case scenario here is that you would have to do a system recovery back to the way the system was out of the box.  This is the worse case due to it will wipe out all your data from the hard drive if it is not backed up already.
    Hope to hear back from you soon.
    Thanks You.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Finger print reader will not work with password manager

    i have the finger print reader working fine to log into windows but when i select advanced options for a password protected site in password manager,and custom security level ,when i click on protect with finger print,it says i have not enrolled any finger prints with client security solution,when i check the fingerprint tab in client security solution it shows my fingerprints what i have stored,why is this conflict happening?when i check my web email i want to be able to swipe my finger and log in not keep typing my password in,anybody know how to sort this??

    Hi,
    I have the same problem, help me please.
    I have the 3000 N200 notebook, when I use the finger print to log on using the windows vista logon it work fine, but if I try to use it with ThinkVantage technology (such password manager) it told me that  the device is not installed.
    (Sorry for my english.) 

  • Lost finger print access when going from vista to xp

    Starting session with finger print worked fine with vista but after tranfering to xp pro I get a message saying the computer name is incorrect. Any solution?
    François

    François, welcome to the forum,
    did you delete the finger print profile in Vista before you installed XP?
    Try clearing the finger prints in the BIOS Security menu. You will then need to create a new profile from scratch in Vista.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • HT201263 Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover

    Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover my iPhone using i tunes.
    Suddenly an iTunes pop up a message "that I must respond to iTunes on my phone, so that the computer could have access to the phone".
    HOW COULD I RESPOND ON MY PHONE WHEN I WAS DISABLED ALREADY?
    IS THERE ANY BUTTON TO BE PRESS AS CODE COMBINATION THAT STANDS AS MY RESPOND TO ITUNES?
    <Edited by Host>

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.
    For the future, this is the iPod touch forum

  • It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

    It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

    Standard practices:
    Restart the device (power off completely, then back on) - retest.
    Reset (hold sleep wake and home buttons until apple logo appears) - you can try this, but it is most useful when your device is frozen.
    Restore to factory settings - retest.
    Make an appointment at an Apple retail store genius bar if the above did not resolve the issue.
    HTH.

  • HT204587 iphone 5s finger print not working any help please

    hi
    the finger print has stopped working i have tried everything but nothing works please help.
    Thanks

    The iPhone comes with a 1 year warranty and 90 days of complimentary support. AppleCare + extends that as shown in: http://www.apple.com/support/products/iphone.html
    The following gives instructions for dealing with the forgotten passcode: http://support.apple.com/kb/ht1212

  • IPhone 5S Finger Print not working, locked out

    I recently bought an iPhone 5S and input the finger print access.  It is not working and is requiring my 4 digit code which apparently I can't remember.  After each incorrect number it takes longer before I can try again.  I am up to over an hour.  I bought the phone through Att and thought that I had Apple Care for a year but apparently that is not true.

    The iPhone comes with a 1 year warranty and 90 days of complimentary support. AppleCare + extends that as shown in: http://www.apple.com/support/products/iphone.html
    The following gives instructions for dealing with the forgotten passcode: http://support.apple.com/kb/ht1212

  • My iphone 5S finger print touch sensor got damaged , replacement of touch sensor will work  touch id ?

    a local service person damaged my iphone 5s touch sensor while replacing the strip , after that only home button is working , finger print sensor is not working , only passcode option in settings, no touch id n passcode ... replacement of touch sensor will work the touch id ?? plz guide me

    It was in warranty (one year) until it was opened.
    If it is working (other than fingerprint reading), the safest thing is to just use it with a passcode.  It is still better than any other model iPhone.
    If you are feeling lucky, you could take it back to your service person.  Maybe the cable from the home button isn't connected properly, and can be fixed.  There is, however, the risk of more damage, so you can end up with no working phone.
    If there is a real Apple store available, they may accept it for a non-warranty replacement.  It would be cheaper than a new phone, but a lot of money for just getting fingerprint reading.

Maybe you are looking for