With Firefox open an update window came up; I clicked on Restart Later. When I later clicked on Firefox icon, a message brefly appeared "Firefox is damaged and cannot be opened" and the icon changed to a generic one with the "Do Not" slash across it.

With Firefox open an update window came up; I clicked on Restart Later. When I later clicked on Firefox icon, a message briefly appeared "Firefox is damaged and cannot be opened" and the icon changed to a generic one with the "Do Not" slash across it.

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

Similar Messages

Adobe Premiere CC 7.0 The project appears to be damaged it cannot be opened.

Hi, please help me,
I accidentally deleted the project files (also auto saved files) but I recovered them (by recuva tool),when I want open the file the Premiere say me error "the project appears to be damaged it cannot be opened" .. the import into new project is not working, can you help me please? some recovery tool? Or can I send the file to you?I use version Premiere pro CC (7.0). thank you a lot!

Gary,
Three things that I would try:
Look in your AutoSave folder for that Project, and find the latest - try to Open that. Note: if the defaults were not changed, you will have 5 AutoSaves in that folder. As AutoSave files are FIFO (First In - First Out), I would look at that folder with Detail View, and check the Date/Time of each file - #3 might be newer, than #5. Try each AutoSave file in reverse order - newest first, and work backward, until one does Open correctly.
As a PREL file is XML, one can use a free utility, XMLWrench, to test the PREL's header. When going to Open the PREL into XMLWrench, you will likely need to change the file extension from "XML" to "All Files," to see the PREL's.
If your issue is due to a bad/corrupt Asset, one other test would be to use Windows Explorer, to "hide" the Assets. I would Move all to separate and different, newly created sub-folders, say "Video," "Still," "Audio," etc.. Then, try to Open that original PREL again. If it gets past the initial Open stage, you should get a dialog asking "Where is file ____ ?" Then, navigate to the sub-folder, where you Moved that Asset type, say "Video" sub-folder with your Video Assets. Locate that first "missing file," and PrE will attempt to relink to it, and then automatically attempt to relink to all other Video Assets in that sub-folder. This process will repeat for each Asset type, in those sub-folders. If the Open process hangs, or gives an error message, then you know which Asset type has a problem. One can then manually separate those Assets, as before, but into individual sub-folders, so that you can isolate on the one bad file - hopefully. Depending on the number of Assets in that Asset type, it can be a bit tedious, but if you can isolate a problem Asset, you can then investigate how to handle that.
Good luck, and thanks for letting us know about the "offline editing." I had the same question as Steve G did.
Hunt

USB failure: "The project appears to be damaged, it cannot be opened." CS2

First of all - yes, I'm using CS2. I can't afford to buy a newer version at the moment, so I'm living in the past.
Second of all -- I am committing several egregious sins that would make my past video editing teachers cringe: I was editing directly off my USB, and I didn't make the occasional iterated file-name save as I ought to have. I realize this is rather poor planning on my part, but my lack of harddrive space (and USB disk space, honestly) dictated my actions more than my better judgement.
After saving a file -- not experiencing any crashes, mind you -- I went to edit one of the unrelated clips in After Effects to import into Premiere, because I had a few fancier things I'd wanted to do before importing it. Upon finishing the clip to my satisfaction and exporting it, I returned to my Premiere Pro project, only to be greeted with the following error:
"The project appears to be damaged, it cannot be opened."
So, into the wonderful world of autosaves I go (because there is only so much advice I can stand to ignore, and the autosaves are one feature I turn off only when absolutely positively desperate) -- except the autosaves all appear to be similarly affected, much to my dismay.
Advice? Is my work unrecoverable? Is it a matter of looking for USB repair software? Is there some trick I can employ to let it load whatever parts are not corrupted, and fix whatever is? The file certainly seems large enough to contain at least some useful information, though I know that means almost nothing in the world of oh-my-gosh-what-did-I-just-do-fix-this-ack-is-this-the-end-etc-etc computer errors.

OK I've tried to make sense of this an to troubleshoot it myself. I've spent lots of time trying to find a solution relevant to the problem, but so far have not. Seems time to submit and see what help there may be.
I'm using Premiere Pro 3 on a HP desktop with 3.0 GHz chip, w 4 GB sys memory using MS WinXP. It's sold as a "media PC".
There's a 2TB WD MyBook external drive attached by fire wire to the desktop PC (PC A). The desktop PC has 150GB hard drive and a high end graphics card that supports dual monitors. I've been editing with this rig over 2 years with no problem.
I have various other external hard drives I've been using with no problem, including another MyBook 2TB, an Iomega 500GB, and 3 or 4 small WD Passport type hard drives with 400GB to 500GB apiece. I have two laptops that meet the system requirements for using Adobe Premiere Pro CS3. Both have PPro CS 3 installed.
Recently, I started getting a message when opening PPro projects on this drive using the desktop PC: "project appears to be damaged, it cannot be opened".
In the past, this message has happened occassionally. When it did, I'd retrieve a file from the Premiere Auto save directory and just continue on with no problem. More recently - this past weekend - I suddenly found all the PPro projects on the 2TB external drive generate the same "project damaged" message when I try to open them.
I have various PPro projects in progress on other external drives used on other PC's. So I opened PPro project files on another drive with the same desktop PC A with no problem. All projects on other drives open OK on the desktop PC.
So it seems the desktop PC is not causing the "projects damaged" problem.
Then I used a different PC - one of my laptops that has the same PPro software installed - same version installed off the same disc. Using the project files on the 2TB - the drive that seems to generate the "files damaged" messages, has no problem opening on one the laptop PCs. So it appears the 2TB external drive is not source of the problem since it works with PCs besides the desktop.
It would be great to diagnose the problem so I could get a solution, but getting a diagnosis seems to defy logic.
The project files on external 2TB drive - when used with the desktop - don't work
The project files on different external drive, when used with the desktop - work OK
So the desktop is not causing the problem, because PPro project files on other drives work fine on the desktop.
So maybe it's the 2TB drive that's the problem.
The same project files on the 2TB drive - where the "projects damaged" message happens - work OK on either of the two laptop PCs.
The projects on the 2TB drive all open with no problem on the laptop PCs.
Since the project files on drive the 2TB drive work fine on both laptop PC's, the 2TB drive is not the source of the problem either.
Just to be sure, I completely uninstalled the entire Creative CS3 Suite from PC A the desk top and completely reinstalled it.
Same problems, uninstalling and reinstalling the software makes no difference.
o Using PPro project files on the 2TB drive, with the desktop, generates the "projects damaged" message.
o Using PPro project files on the other drives, with the desktop, generates NO "projects damaged" message.
o Using the PPro project files on the 2TB drive with other PCs generates NO "projects damaged" message.
Hope this makes sense. The symptons certainly don't Thanks for whatever advice and feedback can be shared. GWDMRG

"The project appears to be damaged, it cannot be opened"

I have created a project in Premiere Pro Creative Cloud CS6 but when I try and open it in a single-app subscription version and also the copy we have as part of the creative suite I get the following error -
"The project appears to be damaged, it cannot be opened"
Is this due to the difference in versions or is the file actually damaged?
It still opens fine on the machine running the creative cloud licence with no errors so I dont believe the file is actually damaged but we can't access it from the other machines.
Any help would be much apporeciated.
Thanks

Welcome to forums .
The error massaage indicates that project file is either damage or corrupt .
If the project file is fine then same project file can work both on single App subscription and Volume license subscription .
Just make sure you are opening project created in Premier pro CS6 not of project created in premier pro CC.
Project created in Premier pro CC will not open ion premier pro CS6 whereas vice versa is possible.
Regards
Karandeep singh

The project appear to be damaged it cannot be opened.

hello
I am working on a project for my university and i have a serious deadline for it.
I was editing my project with premier pro cs6 and everything was working fine.
After i decided to color correct it i opened it with speedgrade.
Now i want to open it again with premier pro but this damage message prevents me.
plz i need help i have to finish it and this project is very important to me.
Which is the solution or how i can have back the exactly same file to Premier pro as it was! it's a hard work!

I dont recall any functioning or ability of CS6 and Speedgrade ( as a link) so I am wondering how the project got screwed?
I maybe wrong tho'.
ohh no ! none of the back ups are opening!
Where are your manual Back ups?
ie Save a Copy as....before attempting any "potentially risky" actions. ( or just as good practice)
FWIW - I will usually create a New Sequence as well as a manual "Save Copy as" before many actions in Premiere. eg a Link to Speedgrade would be from a duplicated sequence 'Projectname SG Sequence'
i can still open it in speedgrade but i cant in premier pro and now i want to edit it again
Is it a linked project?
Can you export a movie from there? (safety version for reference)
Can you export an edl or xml from there?

My lightroom 4 wouldn't open. A computer tech worked on my computer to clean it all up, etc. however lightroom still wouldn't open. He opened a new catalog and that will work, however I can't find my old one with all my photographs. When I click on ope

My Lightroom 4 wouldn't open. A computer tech worked on my computer to clean it all up, etc. however Lightroom still wouldn't open. He opened a new catalog and that will work, however I can't find my old one with all my photographs. When I click on open catalogs, it goes to documents and I can't find any catalogs there.

What happens if you try File->Open Recent? What happens if you have your operating system search all of your hard disks for files whose name ends with .LRCAT?

Ive recently updated my new email address with my apple ID but now my iphone and ipad dont recognise these and wont allow me to edit or change them without signing in with my old details to an account that no longer exists, can this be fixed? thanks

ive recently updated my apple ID with my new email address but now my iphone and ipad dont recognise these and wont allow me to edit or change them without signing in with my old details to an account that no longer exists, can this be fixed? thanks

Go to setting on the devices and change the information
Settings
iTunes and App Store
Account
(Change account)
Also settings
Mail, contacts, calendars
Account
(Change account)
Same for everything else that uses your email address. Facebook, Twitter, iCloud, on and on.

I bought my iPhone 4 locked from USA. I leave in Cyprus and i want to know if there is a way to get it unlocked. Could it be changed to an unlocked one with a fee paid to apple.

I bought my iPhone 4 locked from USA. I leave in Cyprus and i want to know if there is a way to get it unlocked. Could it be changed to an unlocked one with a fee paid to apple.

If you purchased the phone from a person, you need to find out which carrier they used and go to them to see if the will unlock it. If you purchased it from a carrier, give them a call to see what they will do.
Just like atlantabrave said...Apple does not unlock phones.

Cannot "print" a window as pdf then read it in Adobe Reader; Adobe says the file is damaged and cannot be opened.

Running Firefox 4.0 on an Intel Mac OS 10.5.8. Same problem with Firefox 3.6.16. You can save a Firefox window as a pdf file by using the File dropdown menu and selecting Print. Under Print, you can select PDF, then Save as PDF or Save as Adobe PDF. Firefox will save the file. If you try to open the file you get an error message that the file is damaged and cannot be opened. I did not have this problem in Safari; I followed the same procedures and the pdf file opened fine in Adobe Reader. Why is Reader rejecting the pdf file produced by Firefox when it did not reject the pdf file produce by Safari?

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH!

I DOWNLOADED FIREFOX 10 ON MY WINDOWS 7 COMPUTER I REBOOTED AS TOLD BUT WHEN I TRY TO OPEN FIREFOX IT SAYS IT HAS TO BE REBOOTED; WHEN I TRY TO UNINSTALL IT SAYS IT HAS TO BE REBOOTED OVER AND OVER AGAIN in English

I DOWNLOADED FIREFOX 10 ON MY WINDOWS 7 COMPUTER I REBOOTED AS TOLD BUT WHEN I TRY TO OPEN FIREFOX IT SAYS IT HAS TO BE REBOOTED; WHEN I TRY TO UNINSTALL IT SAYS IT HAS TO BE REBOOTED OVER AND OVER AGAIN in English

Exactly what did you do to "try to transfer all of yoru photos" to the iMac?
LN

How do I change the name that is displayed as one of the main folders on finder?

I cannot figure out how to change the name that is displayed as one of the folders (in the red circles in the picture). It currently has my dad's name because he set up the computer but he does not use it and I wanted to try and change the name to my own. I have tried system-preferences/users-&-groups and made changed the admin to my own name but that did not change the folder name. And when I clicked the "unlock to make changes" on the folder menu (left window in the picture) it did not allow me to change the name. Any ideas?

That is your admin account on the computer. Simple solution:
Create a new admin user account to your liking. Log into that new account then delete the old account.
See also this article.

The Downloads folder's icon had changed to an file icon ,and cannot be opened.

IN my Finder ,the Downloads folder's icon had changed to an file icon ,and cannot be opened. when i open it's info window,In the Sharing & Permissions section, it shows that you have unknow permision. i don't know what i had done before it changed .perhaps the FTP settings?or files Sharings? how can i restore it to the default setting?

this is the "Get Info" window.

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac

With Firefox open an update window came up; I clicked on Restart Later. When I later clicked on Firefox icon, a message brefly appeared "Firefox is damaged and cannot be opened" and the icon changed to a generic one with the "Do Not" slash across it.

Similar Messages

Maybe you are looking for