With HP 8600 Plus, why must I replace ALL colors at same time when only one is out?

I got a message that my Yellow Ink was low, but when I replaced just that, the printer said I had to replace the other two colors as well. I thought the advantage of having them separate was that you could replace one at a time. Is there an easy fix? Something I am missing? Hope you can help.
Otherwise, am very happy with this printer.

When a cartridge is replaced there is an initialization routine to prime the cartridges. This will use some of the ink in the other cartridges. If they were near empty the initialization of the yellow cartridge may be enough to trigger the low ink message on the other cartridges.
There was a firmware update that addresses a few issues and includes inproved ink efficiency. See the page here for information and instructions to update the firmware.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Devices with different Apple IDs ring the same time when some one facetime me.

I have iPhone 5s and iPad mini. Each has its own Apple ID. But, when some one facetime me on one of them, both are ringing. Even one is in London, and one is in Austin.
How to fix to have iPad mini rings when facetime to it, or iPhone rings when facetime to iPhone, not both.
Thanks.

TJBUSM1973, rbrylawski...,
Thank you for helping me on this problem. To answer your questions,
- No, each device has different contact, i.e. "reach me.." to different email address.
- No, one of the Apple ID is totally new one for my iPhone 6s.
- I have done some testing. My son set up two different entries of my devices, i.e., one for each device. But, it is still ringing one both devices when he facetimes me using one of his entries.
But, it seems that if someone just has setup to reach me on one device in her device, then, only this device is ringing. So, I am not sure why. My son's set up are two different contacts to my devices.
I will do more testing when my son brings his device back home.
Thanks again.

Why must I upgrade RIGHT NOW or quit CC when an update rolls out?

After the umteenth iteration of this, I'm growing very tired of being FORCED to update my creative cloud manager every single time an update rolls out. I come from a an IT strategic background that strongely believes in not changing smoothly running setups until the most opportune time (between projects), and this is necessitating mid-project version changing.
What is changing so frequently with that app manager service? Why is it so critical that I be up to date that you force the exiting of the service rather than let it run one version back? Please consider changing this policy as it is disruptive to professional workflow, though, admittedly, the app manager itself isn't likely to cause a project jeaopardizing problem as much as, say, after effects or premiere are. THe more significant issue may simply be that it's annoying me and the staff here when it seems pretty much every time we ever click that CC icon, we have to sit through an update.

I agree. Sick of this kind of blackmail from Adobe.

Why does the Error: 500 SC_INTERNAL_SERVER_ERROR appear when multiple users access my JSPs but does not occur when only one user accesses my JSPs?

When multiple users run my JSP application, why do some users get an Error: 500 SC_INTERNAL_SERVER_ERROR for certain JSP pages with the error message No such file or directory. The JSP listed on the Error 500 page varies and is not always the same. When only one user runs my JSP application, the problem does not occur?
The database connection is held when the user logs in or accesses certain parts of the JSP and then is immediately released. No connections to the database are held.
We are using Solaris 8 with MU_6 plus recommended patches.
Enterprise Ultra 250
iAS 6 SP 3

Is anything showing up in the KXS or KJS logs?
It sounds like you might having some kind of thread safety issue with your code. Either that or your guess about running out of database connections.

I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!

please help me with dis...
I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!

Restore the phone as a new device. There is probably something that was corrupted on your phone during the update and has been passed via the backup to the replacement phone. If the corruption/problem is contained in the backup, you'll need to re-sync your data, and re-install your apps manually. Restoring the backup again will only bring the problem back with it.
If restoring it as new does not fix it, then make an appointment at the genius bar.

My MX 892 isn't printing in all colors. I have replaced all color cartridges with no luck. Any help?

My MX 892 isn't printing in all colors. I have replaced all color cartridges, used the head cleaner option and even tried realigning the print head. I'm still getting mostly yellow images, no magenta or blue. Any help?

I have run a few deep cleaning with fresh ink cartridges. Now the printer will not print any colors.

Why must I restart my mac pro each time I want to see my iPhone in iTunes

Macbook pro Mid 2012, 2.5 GHz, 16GB, 500 GB,
Why must I restart my mac pro each time I want to see my iPhone in iTunes?

Did you already try the troubleshooting in this article?
iOS: Device not recognized in iTunes for OS X - Apple Support

Why does closing all open windows (15) and leaving only one drop ram usage from 1.5 to 1.4Gb and not more.

Why does closing all open windows (15) and leaving only one drop ram usage by only 100mb from 1.5 to 1.4Gb.
What is in this 1.4 gb ?
I don't care much about ram, It's just that cpu usage spike like crazy by the end.
''Edited to remove swearing - TonyE''

Hi musicfan,<br />Sorry you are having problems with Firefox. Maybe you should have asked earlier and we could have fixed it.
Reading your comments I do not see that rolling back to an insecure Firefox 22 will actually help you much. You are probably best using IE, unless you have also damaged that.
*[[Export bookmarks to Internet Explorer]]
You should not use old versions they are insecure. Security fixes are publicised and exploitable.
* [[Install an older version of Firefox]]
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
Most others will not be having such problems. We are now able to say that with confidence because after developers missed a regression in Firefox 4 telemetry was introduced so that data was obtained. It may be an idea to turn on your telemetry, if you have not already done so, and decide to stick with Firefox.
*[[Send performance data to Mozilla to help improve Firefox]]
Trying safe mode takes seconds. Unfortunatly if you are not willing to do even rudimentary troubleshooting there is not anything we can do to help you.
*[[Troubleshoot Firefox issues using Safe Mode]]

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
Any idea what I should do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Why do I get a conversion failure every time when I try to merge documents together???

Why do I get a conversion failure every time when I try to merge documents together???

Hi mdrhine,
I'm sorry that you've been unable to merge files. Let's see what we can figure out.
Are you unable to merge any files? How large are the files that you're trying to merge, and how many are you trying to merge at once?
If you're merging more than a few files, or those files are particularly large, ttry merging those files in smaller batches. If one or more files is causing the conversion failure, merging in smaller batches should help you isolate the problematic file or files.
I look forward to hearing back from you with some details about the files that you're trying to merge.
Best,
Sara

Why does my iphone 3GS repeat the same song when I choose shuffle?

Why does my iphone 3GS repeat the same song when I choose shuffle? It just started doing it today. I rebooted the phone, I looked to see if th repeat icon was being chosen and I cant even find that anymore! Help!
Deb

You can find the Additional Audio Controls as described here, to check if "repeat song" is also activated.
http://manuals.info.apple.com/en_US/iPhone_User_Guide.pdf page 94
Additional Audio Controls
To display additional controls, tap the album artwork on the Now Playing screen.
The repeat, Genius, and shuffle controls appear along with the scrubber bar. You can see elapsed time, remaining time, and the song number. The song’s lyrics also appear, if you’ve added them to the song in iTunes.
Use the scrubber bar to skip to any point along the timeline. You can adjust the scrub rate from high-speed to fine by sliding your finger down as you drag the playhead along the scrubber bar.

Is it possible to link up several macs, all with different login details, to an apple TV 2 all at the same time?

Is it possible to link up several macs, all with different login details, to an apple TV 2 all at the same time?

You can stream from multiple libraries but they must all be using the same home-sharing ID

Can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

thank you for your reply, it is not very fair from apple, since for not using your credit card, you need to create a new account and if you do not have multiple e-mail working , you are stuck! thanks anyway

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

With HP 8600 Plus, why must I replace ALL colors at same time when only one is out?

Similar Messages

Maybe you are looking for