With iOS no GPS-Fix

After updating my 3GS from 3.1.3 to 4.0, i don't get no more gps fix. What's up?

I'm getting very interested in GPS problems across the iPhone range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

Similar Messages

  • V32.1 Released Today With iOS Download Failure Fix

    Hello,
    This morning (Pacific time) the v32.1 release was made public. It contains a fix to the download failure issue that surfaced in the following forum discussion:
    iPad folio "Cannot connect to server" download problem
    This issue only affected v32 apps (v31 apps were not impacted).
    The iOS Adobe Content Viewer with this fix is being submitted today for Apple approval, and may take a few days for approval and release.
    For additional details on the release please refer to the DPS release notes:
    Digital Publishing Suite Help | What’s new in this release
    -nate

    thanks for the information?

  • I have an iphone 5 with iOS 6.  I just  tried to sync it with my itunes account to put new music on my phone and it gave me a message that said the iphone could not be synced b/c "the sync session had failed to start".  How do I fix this?

    I have an iphone 5 with ios 6.1.4.  I just tried to sync my phone to my itunes acct to load new music onto my phone and it gave me a message saying that it was unable to sync b/c "the sync session failed to start".  It let me download all pictures, but would not let me do anything else and just kept repeating the same message.  Why is this happening and how do I fix it?

    You need to subscribe to iTunes Match to store your music on iCloud:
    http://www.apple.com/itunes/itunes-match/
    To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
    Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

  • When will these issues with iOS 8.0.2 be fixed?

    Admittedly, this problem has been going on since Apple released the core iOS 8 software, but it's glaring (worse) here. Let's go to the beginning.
    I own an iPhone 4S 8gb and upon release of the core iOS 8 software, I installed it like a fool and I didn't know that a lot of problems came with it, so the next morning, my iPhone's internet (connected to a WiFi network) was shotty as sin and I really needed it at the time because of a Transit thing I was doing until recently. The features that came with the iOS 8 is impressive, but I also was shocked when I couldn't even listen to my music for a whole day (I fixed that when I hooked up and synced in iTunes), despite my library having the same number of songs before the update on the iPhone. Now, I've heard of these problems from a friend who apparently works for the Apple tech department days after I discovered them myself, so I waited for the next update in hopes that it'd fix all of the core iOS 8's problems, but... short and to the point, this update is even worse than the core software. Problems include, but not limited to:
    Safari lags like crazy at times, especially when you're trying to type something. Also, Safari seems to not direct you to Google unless you searched for the topic again; I don't like doing that. I like typing in a research topic in Google's engine only once.
    Siri is much worse than the 7.1.2 software; the assistant can't tell what you're saying 69% of the time. I'm also not pleased with holding the home button to speak to the assistant and continue holding it until you finish speaking to her/him.
    Apps freeze and become unresponsive and in common cases, they crash in the middle of the night (a perfect example would be YouTube) while I'm sleeping (not 100% sure who's to blame for this, Apple or the app developers themselves).
    (refer to the lagging Safari bullet) The keyboard lags on you badly and I'm not just talking about Safari, this problem is every where you need the keyboard in, including basic texting in iMessage.
    The Music app apparently can't judge your selection at times, like, when you select a song from your library, it takes 3 hard pushes on the touchscreen to select it and sometimes, it randomly selects the next song under the one you want to listen to.
    Did I mention the constant lag?
    I'll probably find more problems as I scan though the iPhone tonight, but above are the main problems that I have with 8.0.2, not 8. I know what you're probably saying: "Why not just downgrade back to 7.1.2 where you didn't have barely any problems at all with your iPhone?" Well, apparently, Apple stopped signing the software when I tried to restore the iPhone in iTunes to that firmware, so I find it completely pointless to try to downgrade. My core question is "When will these issues with iOS 8.0.2 be fixed?" I know the iPhone 4S can work with the newest iOS, because, if it wasn't, iTunes wouldn't have notified me of the update. I was thinking of getting an iPhone 6 or 6 Plus June or July of next year, but if the software is still buggy at the time, I'll stick to my 4S until my contract ends at the end of 2015

    Also, I've noticed that the 4S' battery life is horrible even if there's just music going on in the background. Common battery life for the iPhone is 3 hours (just having music and data active) and most of the time, I'd have to carry my USB charging cable with wall socket so I don't have to worry about it shutting down on the go and I know it's the software that's the problem because it wasn't like this prior to iOS 8.0.2 or even the core iOS 8. Common battery life for the iPhone on iOS 7.1.2 was atleast 7-9 hours on the same conditions as listed above.

  • Hey Apple when are you going to fix the problems with IOS 8.3??

    Hey Apple when are you going to fix the problems with IOS 8.3??
    Message is working weird.
    I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
    Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
    If there's a fix coming when will we see it?
    (I'm using iPhone6 plus)
    I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
    I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
    I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!

    I have a Verizon iPhone 6 and am having none of those problems.
    SueMac wrote:
    Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
    Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
    I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
    If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
    http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-…

  • I just downloaded IOS 8.0 and now my Brookstone Scanner no longer work. I read in theScanner app that my scanner is not compatible with iOS 8.0.  Is there an Update coming to fix this? Or can I downgrade to IOS 7.0.  Right now my scanner is no good.

    MMy Brookstone Scanner no longer works with IOS 8.0.  Is an Update coming to fix this?

    You'll have to contact Brookstone, the developer of the app in question to find out if they will update the app.

  • My iPad bought last year with ios7 starting crashing in many apps on updating with iOS 8 , I would like to know whether Apple is working on fixing bugs and when they are likely to come out with the solution?

    My I pad originally with iOS 7 is crashing and slow in many apps , whether Apple is working on fixing the bugs?

    Hi..
    Try a reset ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • A fix that works for your battery drain with iOS 8.2

    After I updated my iPhone 4s to the new iOS 8.2 I found my battery life had become terrible.  I could barely make it through an 8 hour day at work before my phone would die.  It was so bad that I had to get myself a second charger to plug it in during the day.  Even then, if I used the phone at all, it would still lose its charge while plugged in.
    Before this update, my phone would easily last through the day and would not need to be plugged in before I went to bed.  Even at midnight when I'd go to rest for the night, my phone was never below 70% and most times it would still be well above 80% but not so with iOS 8.2  So here is a fix I found on another forum somewhere.  I was desperate so I tried it and low and behold, it worked great.
    Here goes:
    Let your phone die completely until it turns off by itself
    Plug it in your charger until it comes back on again (around 6% for mine)
    Turn it back off using the top button and the slider on the phone
    Leave it plugged in for 2 to 3 hours or until you figure it would have reached 100%
    Unplug the phone and turn it on
    Now reboot your device (turn it off and back on again)
    That's it.  This fixed it for me and for many on the forum where this was posted.  My battery life is back to what it was before my update to iOS 8.2.  I have plenty of battery life left when I get home after work.
    Try it and pass it on....it works.

    Use the Settings app to determine what apps or processes are using your battery the most. Once you know what is causing the battery drain you can take steps to reduce it.
    Settings > General > Usage > Battery Usage
    Wait a few seconds for the device to bring up the list of apps with their battery usage.

  • I recently upgraded my iPhone 4 with iOS 5 and ICloud.  My Contact information is missing phone numbers.  What is my fix?

    I recently upgraded my iPhone 4 with iOS 5 and ICloud.  My Contact information is missing phone numbers.  What is my fix?

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • Ipod 4g does not work with gps mount anymore, with iOS lower than 6.0.1 it worked

    After updating my iPod to iOS 6.0.1 and 6.1 my gps mount does not work anymore. It used to work perfectly.
    Have checked with a TomTom app if satelites are connected and it has good connection but navigation app does not work.
    All advices given in the community did not help so far.

    Have yo look here:
    TS1702 magellan External gps not...: Apple Support Communities
    after updating to iOS 6 gps signals are...: Apple Support Communities
    Otherwise I know of no solution.
    For the future just saying "All advices given in the community did not help so far." provides us with no information as to what that is.

  • Apple Released iOS 7.1 with Major AirPlay Bug Fix

    Apple released iOS 7.1 with interface refinements, bug fixes, improvements and new features on Monday. But has the Airplay bug been fixed?
    During the test of X-Mirage, we have found that AirPlay on iOS 7 is not as stable as on iOS 6 and we have reported a serious bug to Apple:
    iOS 7 BUG – The devices stop sending mirroring data to Apple TV or X-Mirage one minute after iOS devices auto-locks
    https://discussions.apple.com/thread/5468657
    After using the iOS 7.1 today, we find that Apple has fixed the bug and AirPlay is more stable than before, so our distinguished X-Mirage users, you can update to iOS 7.1 freely and enjoy more fantastic AirPlay Mirroring and Streaming services. Getting the update is easy. Go to Settings. Select General. And tap Software Update.

    thanks for the information?

  • Since I updated my Mac with iOS 7 I continually have pages open that get pixelated, either the whole page of parts.What can I do to fix the problems?

    Since I updated my Mac with iOS 7 I continually have pages open that get pixelated, either the whole page of parts.What can I do to fix the problems?

    Hi Peter,
    The results:
    Hardware Information:
              MacBook Pro (15-inch, Mid 2010)
              MacBook Pro - model: MacBookPro6,2
              1 2.4 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics - VRAM: 288 MB
              NVIDIA GeForce GT 330M - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:3:27
    Disk Information:
              Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 319.21 GB (121.43 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              Dell Dell USB Keyboard
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Internal Memory Card Reader
              Microsoft Microsoft Wireless Optical Mouse® 1.00
              Apple Computer, Inc. IR Receiver
              Apple Inc. Built-in iSight
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.Cycling74.driver.Soundflower          (1.5.1)
              com.sophos.kext.sav          (8.0.14)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.sophos.autoupdate.plist
              [loaded] com.sophos.intercheck.plist
              [loaded] com.sophos.notification.plist
    Launch Agents:
              [loaded] com.sophos.uiserver.plist
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [loaded] com.plexapp.mediaserver.plist
              [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              Safari
              iTunesHelper
    3rd Party Preference Panes:
              Flash Player
              Flip4Mac WMV
              Perian
    Internet Plug-ins:
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              Google Earth Web Plug-in.plugin
              iPhotoPhotocast.plugin
              OfficeLiveBrowserPlugin.plugin
              QuickTime Plugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  13%          Microsoft Word
                  11%          InterCheck
                   4%          WindowServer
                   1%          Dock
                   1%          com.apple.WebKit.Networking
                   1%          sharingd
                   0%          Safari
                   0%          Microsoft Excel
                   0%          Plex Media Server
                   0%          mdworker
    Top Processes by Memory:
              197 MB             Microsoft Word
              139 MB             WindowServer
              123 MB             InterCheck
              82 MB              Preview
              82 MB              com.apple.IconServicesAgent
              78 MB              talagent
              74 MB              com.apple.WebKit.WebContent
              70 MB              Mail
              66 MB              Microsoft Excel
              49 MB              Messages
    Virtual Memory Statistics:
              1011 MB            Free RAM
              1.62 GB            Active RAM
              651 MB             Inactive RAM
              651 MB             Wired RAM
              311 MB             Page-ins
              0 B                Page-outs
    Regards
    Kym

  • Just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks

    just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks

    Hi Apple_Mom,
    Thanks for visiting Apple Support Communities.
    If you've noticed issues after updating to iOS 7.0.2, you may want to first update to iOS 7.0.3 which was recently released.
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If the behavior persists, the troubleshooting steps in this article can help:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Jeremy

  • IOS 6 AirPrint not working with 10.6 Server - FIX!!!

    Not sure if there are any bods out there that use 10.6.8 server for AirPrint but if you do - you will have noticed that iOS6 doesn't see shared printers where as iOS5 does. Below is the fix. You need to be reasonably proficient with Terminal but otherwise - straightforward. Hope this helps.....
    (Obviously you can stop the service and use Netputing's AiorPrint Activator but for a server based managed queueing system, this just allows it to works as it did before.)
    10.6.8v1.1 Server and iOS6 AirPrint not working… Fix below…
    Stop Print Services and as root from terminal using vi or equiv add the following:
    (you will need to chmod 744 to edit then 444 the mime file after. 'touch' the files when your done)
    It may work being left rwx but I don't know - I have just put the files back to their original state.
    Restart print services after and you are all good.
    usr/share/cups/mime/
    File: apple.types
    Add the following line in bold (I have shown a few lines either side so you know where to put them):
    image/pict                              pict pic PICT string(522, <001102FF0C00>)
    image/urf                               urf (0,UNIRAST)
    # Image formats supported by CGImageIO.
    image/imageio                   crw cr2 nef bay raw dcr dng orf srf fax
    File: mime.convs
    Add the following line in bold:
    text/css                              application/postscript                    33          texttops
    text/html                              application/postscript                    33          texttops
    image/urf                               application/vnd.cups-postscript 66           pdftops
    image/gif                              application/vnd.cups-postscript          66          imagetops
    image/png                              application/vnd.cups-postscript          66          imagetops
    image/jpeg                              application/vnd.cups-postscript          66          imagetops

    Arrr - your Printer is AirPrint capable. You are printing direct from an iOS device to the printer. Some printers need a firmware update - others will work with iOS 6 straight away.
    The issue above relates to Mac OS X Server 10.6.8 (not client) and in relation to Print Services. You can use 10.6 Server and AirPrint to Any printer you like - not just an AirPrint ones. This is what AirPrint Activator does for client -  the above fix mends for Server.
    Glad you got you problem solved anyway.
    Oli

Maybe you are looking for

  • Unable to unlock Users & Groups preferences

    trying to add a new user or do anything in system preferences that requires me to unlock - I type in my password (correctly) and the lock will not open. Using a MacBook 2.4 GHz Intel Core 2 Duo, running Snow Lepoard (10.7.4) logged in as adminstrator

  • Query on iphone 5 service in India

    Hi All, I am planning to buy unlocked version of iphone 5 from US through authorized store and will be using the same in India. However, since Apple talks about providing the 1 year warranty, would like to know if anything happens to my iphone, will

  • How do I put notes to an ipod?

    I dont understand how to put the notes into the ipod. I have the ipod nano 3rd Generation. I enabled the disk use thingy. It says to add text files to the Notes Folder but I dont see it anywhere on the device on iTunes. help!!!!

  • Upgrade from XP to Windows7

    I have a HP4720 that came with Windows 7, however I had HP load the computer with XP. I now want to load my Windows 7 (I have the Windows 7 disc and my product key). Is this difficult to accomplish?

  • Can I get iPhone 5 without plan in USA

    Can I get iPhone 5 without plan