With Labview what do I need to run vi's on computers without Labview installed

With Labview, how can I install my VI's on another computer to run them with runtime eng. Do I need additional software or ?

On your development computer, click on Tools -> Build Application or Shared DLLs. Select Application and fill in the rest of the boxes with proper information (click Help button for more info). When all info is correctly filled, click on Build button. This will create an EXE file. On the other computer, install the Labview runtime engine. You can do this by using your regular Labview developer CD. Run the setup program but, when prompted for items to install, uncheck everything except the runtime engine box. Proceed with setup. This will install only the runtime engine on your target computer. Transfer your EXE file to the target computer. Run the EXE file, it should work.
- tbob
Inventor of the WORM Global

Similar Messages

  • I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

    I have just updated my 4s to IOS7. and now my battery discharge is significantly increase. With my Iphone fully charged, the battery run out within 6 hours without using the phone at all. Would it be possible to get the IOS 6.1.3 back to my 4S?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • When I downloaded the latest version of Firefox, the print was so small I could bvarely read it. what do I need to do to enlarge the print without losing some of my tool bars...?

    When I downloaded the latest version of Firefox, the print was so small I could barely read it. what do I need to do to enlarge the print without losing some of my tool bars...?
    == When I downloaded the latest version of Firefox, the print was so small I could bvarely read it. what do I need to do to enlarge the print without losing some of my tool bars...?

    THIS ISSUE IS RESOLVED FOR ME.
    When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
    To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
    UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request.

  • What do I need to run Windows on a Mac and Word for Windows?

    I have a Mac OS X Lion and would like to run Windows programs which are only programmed to run on Windows.  What do I need so that I can run Windows and Microsoft Word.

    kphhim
    "I have a Mac OS X Lion and would like to run Windows programs which are only programmed to run on Windows."
    Your best bet is to use VirtualBox to provide a virtual machine capability allowing the installation of a guest OS like windows. I've used VB extensively for years and I highly recommend it's use for your issue.
    If you have a full version of windows, you could use bootcamp as an alternative to VB but you lose the ability to access the OSx environment while booted in windows.
    Best of luck
    Dan

  • FI-AA Depreciation  Run :what does I need to run depreciation (AFAB trans.)

    I don´t know what I need to run depreciation, I have create a fixed asset, and I have done a posting f-90 , and afterwards I want to execute depreciation but I cannot ¿what does I need to do this ?
    Thanks in advance.
    Olga.

    Hi,
    First of all before running depreciation you need to give the required GL accounts needed for posting the depreciation to the GL accounts in T.Code AO90.
    Then after doing the required configurations u can run a depreciation run only in the month end or in the next month for the previous month.
    If u had posted transactions to an asset using F-90 say suppose in october, u can do the depreciation in the month of october or in the coming month.
    hope it is clear.
    regards
    srikanth.

  • Trying to open a number file it tells me i need a newer version i created it on this computer with numbers what do i need to do

    I am trying to open a file in numbers that I created in numbers but when I try it tells me that I need a newer version of numbers to  open.  I have version "09 2.3(554) and I have checked to see if there are any updates and I can not find any.  What do I need to do to open the file?
    Carol

    Carol,
    In Finder, Right-Click or Ctrl-Click the filename and choose Open With: Numbers 3.
    If you get the error you mentioned, it's almose always because you are inadvertently trying to open the docuement with the old version. It's easy to make that mistake because the icons look similar and of course the names are similar too.
    Jerry

  • I have an ipad 3 with vz, what do i need to do to make it work in europe

    I have an iPad 3 6.1.3 with cellular network with verizon. I am going to Europe in a couple weeks and need to use my ipad while im there. What do I need to do to make my ipad work?

    Since the EU does not use CDMA technology, your Verizon iPad won't connect to any cellular systems anyway, but it does not hurt to turn cellular data off to preserve battery life.
    Note that if you use Airplane mode that will turn cellular off too, but it also disables GPS (which you may need if you have a navigation app with pre-loaded map and POI data -- highly recommended if you don't know your way around).

  • What Do I Need To Run A External Moniter with a Macbook Pro?

    I have a Mac Book Pro 13in Mid 2009 Model. I replaced the RAM to 8GB, I have an HDMI Converter cable to plug my mac book into my 21in moniter, but it seems like it is still lagging behind, with internet connection but the screen just cant keep up or something. Is that a graphics card issue or is there something else that I need to improve the video on my monitor.

    JimmyCheckers,
    there’s not enough information to say for sure. If you watch a video which lags on your external monitor on your built-in display instead, does the lagging cease, or is the lagging also observable on the built-in display? If you completely download a video onto your internal disk before watching it, does it still lag on the external monitor? Does it lag on the built-in display?

  • What do I need to run airplay?

    I've been researching this for weeks and I'm just confused. Please help.
    What I want to do:
    I want to play the songs off my iMac on my stereo in the next room and also be able to access those songs on a separate iMac (in another room, obvs).
    I want to control it through my iPhone using Remote.
    I may also, at a later date, want to run films and photos from the iMac to the telly (once I buy one)
    What I have:
    2 x iMacs (different rooms, obvs)
    iPhone 4S with Remote app
    An iMac remote control
    Airport Extreme (not in use)
    Wi-Fi (courtesy of BT Home Hub 3)
    Why I'm confused:
    I thought it could all be sorted with an Apple TV, then I read somewhere I'd probably also need Aiport Express.
    THEN
    Someone told me all I needed was the Airport Extreme instead
    THEN
    Another person told me the Wi Fi I have would be sufficient
    I have come to the all-knowing Apple Discussions for the precise explanation.

    Using AirPlay, http://support.apple.com/kb/HT4437

  • What do I need to run a compiled vrsn of a serial interface ?

    I compiled and successfully ran the compiled verson of an app. with a serial interface on a WIN2000 computer with the full LabVIEW development suite.
    I installed the LabVIEW runtime engine only on a target computer (running WIN2000) and when I tried to run the app. got the following error -
    arning -1073807202 occurred at an unidentified location.
    Possible reasons:
    VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded.

    You have to install NI-VISA.
    It is possible to avoid this seperate install by including all of the required support files.
    I believe there is a knowledge base article that lists all of the files that need to be included in your build.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • What does Empirix need to run on

    does it need a server? if so what are the requirments of that server? how easy is it to set up and configure?
    thks.
    scott

    e-Tester has the following system requirements:
    Operating System: See Operating Systems Supported.
    Recommended Memory: Minimum 256 MB; 512 MB recommended
    Disk Space: 300 MB (larger recommended).
    System: IBM-compatible PC with Pentium III processor or better
    Microsoft Excel recommended for International system installations.
    e-Load has the following system requirements:
    Operating System: See Operating Systems Supported.
    Recommended Memory: Minimum 512 MB; 1 GB recommended
    Disk Space: 300 MB (larger recommended).
    System: IBM-compatible PC with Pentium IV 1.5GHz processor or better
    Microsoft Excel recommended for International system installations.
    Browsers: Internet Explorer 5.5 or higher
    e-Manager Enterprise has the following system requirements:
    e-TEST suite be installed
    Operating System: See Operating Systems Supported.
    Recommended Memory: Minimum 512 MB RAM (1 GB or higher recommended)
    Disk Space: 150 MB (larger recommended).
    System: IBM-compatible PC with Pentium III processor or higher recommended.
    For Web client: Microsoft Internet Explorer 5.5 or higher is required.
    Microsoft Excel recommended for International system installations.
    Note: If you have a large database and/or are deploying e-Manager Enterprise for a team greater than 10 users, the amount of disk space and memory required for the server will increase. If this is the case, you should consider deploying e-Manager Enterprise on a server class machine with minimum of 1GB RAM recommended.
    The e-TEST suite 8.20 is supported on the following:
    IE 7 Support ? e-TEST suite 8.20 now fully supports Internet Explorer 7.0 for e-Tester, e-Load and e-Manager Enterprise.
    Windows Vista Support ? e-TEST suite 8.20 can now be installed and run on Windows Vista operating system.
    SQL Server 2005 Support ? e-Load and e-Manager Enterprise can now be used with SQL Server 2005 as the back-end data repository.
    Windows 2000 (SP1 or higher recommended)
    Windows XP
    Windows 2003
    Windows NT 4 SP6 (*not recommended; Windows 2000, XP or 2003 preferred)
    The e-TEST suite supports double-byte characters (DBCS) for internationalization

  • What do I need to run FCS 2?

    I posted this question in a different forum (Content creation with Final Cut Studio) but received no replies.
    I'm hoping that posting it elsewhere will net me better results.
    I recently bought FCS2, knowing that I was more than likely going to have to do some major upgrading to my mac to be able to use it. Especially the graphics card.
    Now that I have FCS 2, I'm now worried that my mac just won't be the right kind no matter how much upgrading I do, but I could be wrong.
    So here I am asking for some advice. My current system is a Power Mac G5 The processor is a Power PC Dual 1.8 GHz. 4 GB DDR SDRAM memory, which I believe is the max memory for this system. My optical drive is an internal Pioneer DVD-RW DVR-117D. Graphics card which I know needs to be upgraded is an nVidia GeForce FX 5200 with 64 MB VRAM (very sluggish with motion), and my display is the 23 inch apple cinema display.
    So, am I just going to have to consider purchasing a new Intel G5, or is there some hope for this machine?
    What I use it for now is just basic DV and using iDVD to burn DVD's since I haven't learned DVD studio pro yet. I plan, (after some learning) to get into HD video and DVD's which makes me think that I may need a new optical drive also.
    Can anyone give some advice on the best upgrades needed for this, or am I out of luck?
    Message was edited by: Bobby Merkle

    Sounds to me like you're fine. You meet all the system requirements, and I know many around here that still use G5 systems. Just upgrade your card to an x1900, and you'll have a fully capable system for what you're doing. Also, make sure your monitor is at least 17" if you ever plan to utilize Color.
    BTW: No such thing as an Intel G5. They are called Intel C2Ds.

  • I recently purchased a used ibook g4 and want to update to itunes 10.2. It tells me i need mac os 10.5 to do so. Today is the first day I have ever used a mac and I am not well versed on computers to begin with. What do I need to do?

    I recently purchased a used ibook g4 and i want to update to itunes 10.2. It tells me that I need to update to mac os 10.5.  Today is the fist time that I have ever used a mac and I am not very well versed on computers to begin with. From what I gather I need to purchase the mac os 10.5 but there are a lot of different options and I dont know what I need to do. Can somebody point me in the right direction?  I dont want to spend too much money because i just want my ipod touch to be compatible with my ibook. thank you

    Hi
    Your question is more suitable for the 10.4's General Forum rather than 10.4 OSX Server. Post here instead:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger?categoryID=1 77
    You'll have more of a chance of someone responding.
    HTH?
    Tony

  • What do I need to run/use JSF ??

    Sorry for a rather dumb question. We have a client/server system we would like to convert into a Web Based app using JSF.. we developed our system on J2SE 1.4
    1. What software/runtime environment do I need ?
    2. What downloads must I grab to start using it ??
    Thanks very much
    Mike

    Hi,
    first you'll need the JSF (latest current release EA3) found under:
    http://java.sun.com/j2ee/javaserverfaces/
    then an application server, e.g. tomcat/catalina supplied with the JWDSP and the J2EE platform found at:
    http://java.sun.com/webservices/downloads/webservicespack.html
    and
    http://java.sun.com/j2ee/download.html
    respectively.
    Having installed the JSF you'll find a JSF Spec and tutorial where everything else (configuration, etc.) is explained.
    If you're experiencing problems with the JWSDP 1.1 try getting hold of JWSDP 1.01.
    Good luck & have fun....

  • What program is needed to run itunes?

    In attempting to gain some memory on my macbook pro I deleted some of the programs I did not believe I needed.  In doing this I lost the program necessary to run my itunes.  Can someone help me figure this out?

    Download and install iTunes again:
    http://www.apple.com/hk/en/itunes/download/

Maybe you are looking for