With Mavericks - HFS+ or NTFS???

With Mavericks - does it continues to be so much better to re-format disks to HFS (or NTFS works fine)???
It would be a lot simpler to let my new external drive in NTFS, to let it be used by PC's...
Most information on this subject is from around 2010...
Thank you for for you help guys!

The answer has not changed. It's much better to use HFS+ because OS X has not got NTFS write support enabled by default. However, there are tricks you can use at your own risk > http://osxdaily.com/2013/10/02/enable-ntfs-write-support-mac-os-x/ Or you can use applications like Tuxera NTFS or Paragon NTFS.
The problem is that HFS+ is not detected by Windows, so you would need Paragon HFS. Also, you can consider the option of using FAT32 or exFAT instead, which are supported by OS X

Similar Messages

Best External Hard Drive with Mavericks Compatibility?

What is the best external hard that's compatible with Mavericks OS X 10.9? I've read about all the problems with the WD drive and am looking for a good alternative. Thanks

justineppie
Justin, your new HD needs to be formatted for Time Machine in Mac OSX Extended Journaled.
peter915
   Seagate backup plus all the way. It works on both Windows and Mavericks . Download Paragon NTFS driver
.....Peter, incorrect, Time Machine cannot communicate THRU Paragon, it has to be Mac OSX Ext. Journaled formatted,
1. There is no such entity as "backup plus", its just a mfg. name given to a HD, it doesnt designate anything.
Terms such as:    "WD Passport, Expansion drive, Seagate Backup Plus, PC hard drive, Mac hard drive, Free agent, backup drive, Passport plus, Elements, Toshiba Canvio, Slim, ultraslim, pocket drive, Touro" etc. etc. ........all these terms,...they dont designate or mean anything.
2. Any HD will work with PC or Mac
3. Paragon is for use with a NTFS drive for use with a Mac to communicate with a PC NTFS formatted HD....., not however for Time Machine to do a backup.
justineppie
For using your new HD for Time machine format it ..... >
Go to .... > Finder > Go > Utilities > DISK UTILITY
enter DISK UTILITY
Format (erase) it in "mac osx Extended journaled"
see from mine below, HD on left selected,   .......ERASE tab highlighted.... and middle right roughly, it says "MAC OSX EXTENDED JOURNALED"
thats the format, but yours may be different of course
bottom right ERASE tab lets you erase/ FORMAT your external as you like (remember this erases all data ON THE HD)
highlighted in RED   Erase.......format (middle) ...........erase ACTION to Erase/Format (bottom)
To show your HD on your desktop
go into FINDER at top then PREFERENCES then GENERAL tab
then check "hard disks" and "external disks"
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Everything seems OK with Mavericks and WD external HD

I'm reading about tons of problems with Mavericks and WD external drives. Most mention WD software glitches.
I have a 2T WD My Book USB external HD. After upgrading to Mavericks (two weeks now), I haven't experienced and data loss at all, and all my partitions have retained their names and icons. They all check out OK in Disk Utility. I did have a Finder glitch once where I could not Copy/Paste any file over several several MB., (error 8057) but a restart fixed it. As far as know, that was only from one partition. I have had some video issues launching .avi and .mkv with an 'app not found' error. Making VLC the default for the those files in Get Info seems to have solved that (except the icons remain Quicktime). Previously when launching .avi files QuickTime did not launch and attempt to convert it.
For now, I'm regarding the video thing as a separate issue.
When I got my WD USB ext. a year ago, I did not install ANY WD software. I simply formatted to HFS+ and partitioned in Disk Utility and was good to go. Is it safe to say that since I don't have any of that pre-Mavericks software installed (I double checked with Spotlight), that my external drive is safe? Or should I run out and get a solid state drive ASAP? Is it also fairly safe to think that since I went through the upgrade unmolested and it's been two weeks now that everything is probably OK?

Yup, that's exactly what I meant. It comes preinstalled.
bluetortilla wrote:
It's my opinion that you should always format a new drive.
It's a good opinion!

Why with Mavericks some folders just disappear and reappear randomly for just a few seconds?

Why with Mavericks some folders just disappear and reappear randomly for just a few seconds?

Hi Alinc,
I find that this happens with folders that either have a lot of stuff in them, when there is a lot of large files on my desktop, or when my computer has it's RAM bogged down. I'm guessing it's just a benign performance issue, and so far it hasn't cause me any serous problems except for one folder that constantly take a while to load but I'm not surprised because that folder has 8000+ files and is over 25GB in size LOL.
If this is still an issue for you, or you folders disappear for so long that it becomes an inconvenience, I would recommend trying the following things:
1) Save your work and close any open programs, but don't close your Finder folders though. Click the Apple Logo  in the upper left hand corner of the screen, then choose Force Quit. In the windows that comes up select Finder and choose Relaunch. This should force all of your open Finder folders to get refreshed. Please note this is a very brute force operation so it might be the most elegant solution.
2) A better but less potent thing to try is cleaning up you finder folders. If like me you have hundreds of files in one folder, or there is more than a gigabyte of data in the first level of the folder, then it might be a good idea to clean it up by moving some of those files into subfolders.
3) This is my favorite fix to try, and I recommend it to almost everyone because it's super easy and has a reasonable chance of improving your computer's performance at least a little bit.
3.a) Go to Disk Utility, and click on your hard drive.
3.b) Go to First Aid, and click each of the following one at a time: Verify Disk, Repair Disk, Verify Disk Permissions, and finally Repair Disk Permissions. Each of those actions should take several minutes (3 to 30) to complete on a fast hard drive, so make sure you don't need your computer for any serious work during this time.
3.c) Once those operations are complete click on your Macintosh HD partition (right below the hard drive you clicked before) and repeat step 3.b.
3.d) If you have any other connected hard drives or partitions you can do this for them as well. BUT, I don't recommend doing this on any Windows formatted drives, like FAT or NTFS, or your Bootcamp partition — although the First Aid buttons on the Bootcamp will probably be disabled anyway.
Best,
Vlad

ESATA express card does not work with Mavericks. Any suggestions?

This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
Thanks for any help or suggestions.

The driver has to come from the manufacturer of the card, so your two options are to get another card or to use your full backup to go back to 10.7.5. That assumes it's a clone backup and not Time Machine.

How to mount iPhone 3gs on a macbook pro with maverick ?

how to mount iPhone 3gs on a macbook pro with maverick ?

There are unsupported mechanisms of doing what you want. You can search for iTunesFS.
Garage Band should allow you to send Ring Tones to the 3GS via iTunes - GarageBand '11: Send an iPhone ringtone to iTunes

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Are there Issues with poor performance with Maverick OS,

Are there issues with slow and reduced performance with Mavericks OS

check this
http://apple.stackexchange.com/questions/126081/10-9-2-slows-down-processes
or
this:
https://discussions.apple.com/message/25341556#25341556
I am doing a lot of analyses with 10.9.2 on a late 2013 MBP, and these analyses generally last hours or days. I observed that Maverick is slowing them down considerably for some reasons after few hours of computations, making it impossible for me to work with this computer...

I think I have a problem with Mavericks: can anyone help,please?

A couple of days ago I installed Mavericks on top of my existing Mountain Lion OS. Not before I backed up the ML version with Time Machine, though.... :-)
Initially I thought everthing was fine, but then started to notice a few things that bothered me, which have not gone away. In fact, I think this install is now a potential problem. Unlike many other people, elsewhere on this forum, I have not noticed the calamitous slowing down and general unusability of Mavericks. I'm using a prety new i7 iMac ( the new flat one) with 32 GB of RAM.Everytihng worked great with Mountain Lion. However, The following anomalies have cropped up: Mail is taking over 30" to send a simple email. In ML it was almost instantaneous. I feel that Mail is not performing as it did in ML, and the same goes for Safari. It "feels" odd and slow and can take an age to load up pages. In fact one particular page would not load properly at all, but worked fine in Firefox. In the end got it to work in Sfari, but ithis type of behaviour doesn't instill confidence. Things got wierder...
An update to iMovie got " stuck" in the dowload process,and was perpetually downloading in Launchpad. It kept oscillating from approx 61 MB to aprrox 84 MB of a 1.94 GB file. Then I did a disk utiltiy test of my system drive and it suddenly stated that the drive need repairing. I booted up in Recovery Mode and tested the drive, which came back all clear! I booted up normally again and now the disk utility won't even complete a full diagnosis of the drive!It will diagnos all my other drives fine though.... :-s It keeps getting stuck on: Checking Volume Bitmap, and won't go any further. So, I did what some other person did on another thread, which seemed to clear up his problems; namely: simply reinstalled Mavericks from Recovery mode. This did not improve anything for me. The same issues remain. In fact as I type this, I notice that I'm using nearly 23 GB of my 32 GB of RAM, and all I have open is Safari, Disk Utility and Mail ! To quote Hans Solo: " I've got a b-a-a-a-d feeling about this..."
So, this is my long-winded way of asking: what shall I do? I would like to boot in Recovery Mode and reinstall my back up from an external drive. Does anyone have any advice about this,please? If I restore from my backup, will I actually get the ML OS back on the computer, or will I be stuck with Mavericks trying to impose itself ,as some people reported? I do want to use Mavericks, but not in the condition it's in right now. Also, really don't want to perfom a clean install and migrate everything over from the Time Machine back up....
Thanks for any advice.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window. Can I go back to just double clicking ?

Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader with Mavericks!

I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader. I tried on both MacBook Pros we have here, both now with Mavericks. Error message says "Opening printer connection failed. Unable to open printer connection . . . " This is after it says sending data, printing, shows the percentages etc., but then at the end I get the error message above. I can print a PDF (same one) from Preview, but not from Acrobat! What's going on? Never had this issue before Mavericks . . . Please help.

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I have a 2010 iMac 21.5, and have updated with Maverick. Now I can't open the pages or modify the keynote presentation I am working on.

I recently updated my 2010 iMac 21.5 to MAVERICK. Now I have installed new versions of Pages and Keynote. I have been working on a KEYNOTE presentation that I am modifing for a new presentation at month end, and I can not insert new script. The template is blocked.
Also, when opening an existing PAGES, I get the message that a new version must be installed and it directs me to the app store to buy it for $19.95. Even though these new editions were installed free with MAVERICK, do I now have to purchased these updates?

Did you make the Keynotes presentation in the old or the new Keynotes, if you made it with the old version and try to modify it with the new there could be some incomaptibilites. Try opening the presentation with the original version of Keynotes which will probably be located in the Applications folder under iWork.
Does the message state you may or must purchase an upgrade. For most tasks the old Pages will work on many occasions.
I have the latest Pages to allow my devices to share over iCloud but I have not upgraded Numbers or Keynote as I do not require the functions the lastest versions provide.

I can't install Windows 8.1 on my Imac with Mavericks using Bootcamp. Why?

I can't install Windows 8.1 on my Imac 27" with Mavericks using Bootcamp. Why? I first did all the software updates needed, downloaded the driver software to a 32Gb flash drive formatted as FAT32, fired up Bootcamp Assistant, inserted the Windows 8.1 Full version 64 bit installation DVD as requested, and got as far as partitioning (tried this at 82 Gb for the Windows partition), then the MAC rebooted but halted before getting to the login page. Then a black screen came up with the error message: 'non-system disk - Press any key to reboot'. I did this and nothing happened. I was forced to shut down forcibly then restart with my finger held down on the option key. Then a screen came up with two icons: the macintosh HD icon and the Windows DVD icon. I double-clicked on the Windows DVD icon and the MAC came up with another black screen and error message: 'CDBoot: Couldn't find BOOTMGR'. Had to shut down forcibly again and restart as before, this time ejecting the Windows DVD first. Then I repartitioned my MAC back to all OSX. What the **** do I do now? Applecare couldn't help me beyond this point. They said to contact Microsoft. I notice a lot of other MAC owners have had similar problems.
Please help? tagjsmith.

bootcamp does not currently support windows 8.1

New MacBook Pro with Mavericks- reformat or not?

Hi folks,
Background: I had a lovely MacBook Pro running Snow Leopard which died on me and so I replaced it last week with this equally lovely late 2013 Retina 15" 2.3GHz i7 MacBook Pro which, obviously, came with Mavericks.
But since I was under pressure to get work out I actually set myself up on this Mac, using Mavericks, thinking to just drag some of my files from the old MacBook Pro's hard drive (already in a caddy) to "stock up" my new computer with files I needed when I discovered the Migration Assistant and, perhaps, ill-advisedly just migrated the lot.
I have used it fine with only three applications of, quite literally, a hundred or so lost to me and two glitches probably due to "confused" preferences, but I know that having done it this way is not ideal. I have the original Mavericks based User (hidden of course) and the migrated one.
Snow Leopard versus Mavericks: I very much like Snow Leopard and I don't actually dislike Mavericks as much as I thought I might. But if I were to have to choose one OS over the other the one which would save me money would possibly win.
My problem with Mavericks is two-fold: 1. I have Photoshop CS (yes, OLD. But I cannot justify buying upgrades and it works well for what I use it for) and cannot now run it, and 2. I MUST be able to run Final Cut Pro (6 but I recently bought 7 finally) on it reliably (and I have never had crashes under Snow Leopard, never EVER, but had already one in just one week with Mavericks, possibly due to the way the application arrived on the machine I realise).
My only problem with Snow Leopard is that it is not as cool as Mavericks but for a video editor that is not the be all and end all of it...
What I would like help with is:
1. Could I even have this new Mac run well enough with ancient Snow Leopard (so that I can rescue Photoshop CS)?
2. If absolutely, categorically now- how do I start over? I mean- uninstall the migrated User and take the machine to factory settings? IS it as simple as reformatting (I ask the "silly" question due to the fact that I have not yet worked with a computer which doesn't have install disks) and then reinstalling the software (yes- I have an external hard drive now)?
3. How to effectively "pick the bones" of the old hard drive (I still have the hard drive in the caddy I can take files from- it has become a sort of "time capsule" of my old MacBook Pro) so that I don't mess up Mavericks but still get things like my old email, iPhotos and some installed applications which I am not sure I can find the download links for (even though I have my purchased serial numbers they are often not associated with the download website and with so many I am concerned that I might lose some).
Thank you so much for reading.

MacBraveheart wrote:
Hi folks,
Background: I had a lovely MacBook Pro running Snow Leopard which died on me and so I replaced it last week with this equally lovely late 2013 Retina 15" 2.3GHz i7 MacBook Pro which, obviously, came with Mavericks.
But since I was under pressure to get work out I actually set myself up on this Mac, using Mavericks, thinking to just drag some of my files from the old MacBook Pro's hard drive (already in a caddy) to "stock up" my new computer with files I needed when I discovered the Migration Assistant and, perhaps, ill-advisedly just migrated the lot.
I have used it fine with only three applications of, quite literally, a hundred or so lost to me and two glitches probably due to "confused" preferences, but I know that having done it this way is not ideal. I have the original Mavericks based User (hidden of course) and the migrated one.
Snow Leopard versus Mavericks: I very much like Snow Leopard and I don't actually dislike Mavericks as much as I thought I might. But if I were to have to choose one OS over the other the one which would save me money would possibly win.
My problem with Mavericks is two-fold: 1. I have Photoshop CS (yes, OLD. But I cannot justify buying upgrades and it works well for what I use it for) and cannot now run it, and 2. I MUST be able to run Final Cut Pro (6 but I recently bought 7 finally) on it reliably (and I have never had crashes under Snow Leopard, never EVER, but had already one in just one week with Mavericks, possibly due to the way the application arrived on the machine I realise).
My only problem with Snow Leopard is that it is not as cool as Mavericks but for a video editor that is not the be all and end all of it...
What I would like help with is:
1. Could I even have this new Mac run well enough with ancient Snow Leopard (so that I can rescue Photoshop CS)?
2. If absolutely, categorically now- how do I start over? I mean- uninstall the migrated User and take the machine to factory settings? IS it as simple as reformatting (I ask the "silly" question due to the fact that I have not yet worked with a computer which doesn't have install disks) and then reinstalling the software (yes- I have an external hard drive now)?
3. How to effectively "pick the bones" of the old hard drive (I still have the hard drive in the caddy I can take files from- it has become a sort of "time capsule" of my old MacBook Pro) so that I don't mess up Mavericks but still get things like my old email, iPhotos and some installed applications which I am not sure I can find the download links for (even though I have my purchased serial numbers they are often not associated with the download website and with so many I am concerned that I might lose some).
Thank you so much for reading.
CS3 and newer will run, CS2 or older will not.
You can not run Snow Leopard on your machine (unless you run the Server version in a virtual machine)
Erase your Mac, use Setup Assistant and do the migration correctly, start with an empty Mac (like a new one is)
As for FCP, there are mixed reports, some say it will not install but once installed (?) will run OK, you can but try.

With Mavericks - HFS+ or NTFS???

Similar Messages

Maybe you are looking for